Fanttik K2 Ultra Power Drill, Cordless Drill/Driver, 3/8'' Keyless Chuck, Max. 30 N.m, Max. 1250 RPM, TapSwitch Gear Change, 2.5AH Rechargeable Battery, Tool Kit for Home DIY Projects

First impressions and design

The K2 Ultra doesn’t look like a typical compact drill, and that’s part of its appeal. It’s short front to back, with a 3/8-inch keyless chuck and a footprint small enough to stand comfortably on a shelf without dominating your bench. The included stand is more than a display piece: it keeps the drill upright and hides a full set of bits in a latching compartment underneath. I found myself actually using the stand at a workstation, grabbing the drill and swapping bits without rummaging through a case.

Build quality feels solid. The housing is tight with no creaks, the chuck collar turns smoothly with a positive bite on bits, and the trigger has a controllable ramp that makes slow starts easy. There’s a bright work light that kicks on with the trigger and does a good job of illuminating fasteners in cabinet corners and under sinks. It’s a compact tool, but it doesn’t feel like a toy.

Controls and interface

What sets this drill apart is its smart interface. There are two screens: a main circular display that shows mode (drill or screwdriver), torque and speed, and a small side display that indicates rotation direction. The direction indicator is surprisingly handy; a quick glance tells you if you’re about to back out a fastener or drive it in.

Mode changes are electronic via a TapSwitch—press once to toggle between drilling and screwdriving. In screwdriving mode, torque staging is clearly shown on the screen and limits power to protect screws and work surfaces. In drilling mode, torque limiting is bypassed for full power. There are three speed presets that top out at 1,250 RPM, and they suit most light-to-medium tasks. A long press activates a lock function, which I used when handing the tool off or carrying it in a bag.

The trigger is variable speed and nicely linear. I could feather the first rotations for precise starts on softwood and plastics without skating the bit. That, paired with the short nose length, makes it easy to drill straight in tight quarters.

Performance in the real world

Rated at up to 30 N·m, the brushless motor has more grunt than its size suggests. In screwdriving mode, it sank 2-inch wood screws into pine and plywood without cam-out, and with the torque dialed back, it installed cabinet hardware and electronics screws without stripping heads. In drilling mode, it handled 3/4-inch spade bits in softwood and common pilot holes in hardwood. Sheet metal tasks (standoffs in a computer case and a few vent screws) were straightforward with the included bits and some cutting fluid.

The 3/8-inch chuck is the right choice for a compact driver/drill. It holds hex shanks securely and grips round-shank bits well; I didn’t have slippage during testing. The maximum speed of 1,250 RPM isn’t going to win races against 18V shop drills, but it’s quick enough for brad point and twist bit work in wood and for plastic panels where a slower, controlled spin is better anyway. The brushless drive keeps noise and vibration down, and I appreciated the balance: it sits low in the hand, which makes it steadier for delicate drilling.

Where it taps out is predictable. Boring large holes with hole saws, spinning big augers, or driving long structural screws is beyond its comfort zone. For that, a 12V or 18V drill with a 1/2-inch chuck and higher RPM/torque is a better fit. For home repairs, furniture assembly, light carpentry, and electronics work, the K2 Ultra is squarely in its element.

Battery and charging

The integrated 2,500 mAh battery charges via USB-C. That alone alters how I used it: I kept the drill on its stand and topped it up with the same cable that charges my phone. There’s a clear battery indicator on the display, and I could comfortably work through a few pieces of flat-pack furniture, hang hardware, and knock out a handful of pilot holes on one charge. The non-removable pack keeps the tool small and well balanced, but if you need nonstop runtime on a jobsite, the inability to hot-swap batteries is a limitation. For home and hobby tasks, the convenience of USB-C won me over.

Charging from a standard USB-C wall adapter is straightforward. I didn’t time charge rates precisely because they’ll vary by charger output, but a short top-up during lunch was enough to finish a day’s light tasks. If you’re used to proprietary chargers and bulky battery packs, this is refreshingly simple.

Accessories and storage

The built-in accessory box and stand are more than a gimmick. The base hides 10 drill bits and 10 driver bits, and the selection covers most household jobs: Phillips, slotted, and a couple of Torx and hex sizes, plus common twist drill diameters. The included bits are serviceable for everyday use; if you do a lot of metal work or need specialty sizes, upgrade to premium bits and the 3/8-inch chuck will handle them.

The stand rotates easily on the bench, and the bit compartments open with two buttons—quick to access and secure when closed. For people who misplace bit sleeves, this integrated storage is an upgrade in day-to-day practicality.

Tips for getting the most out of it

• Use screwdriving mode with torque limiting for cabinet hinges, outlet covers, and electronics to avoid stripping.
• For hardwoods or plastics, start in the lowest speed setting and step up as needed to manage heat and prevent wandering.
• Mark depth with tape on the bit when drilling pilot holes for wall anchors to keep holes consistent.
• Keep a drop of cutting fluid handy for thin sheet metal; the controlled RPM and compact size make it well suited for small chassis work.

What could be better

• The integrated battery is convenient, but you can’t swap packs. Users who work continuously may prefer a platform with removable batteries.
• The 3/8-inch chuck and 1,250 RPM ceiling limit heavy boring and high-speed drilling. It’s not a replacement for a full-size 18V drill.
• The included bit set is basic. It’s fine to start, but you’ll want to supplement it with higher-grade bits if you drill metals regularly or need specialty fasteners.

Where it fits

This drill is ideal as a primary home driver/drill for people who prioritize compact size, good control, and smart features over brute force. I reached for it preferentially for assembly, hardware installation, pilot holes, and light carpentry. It excelled in spaces where a standard drill is awkward and on tasks where finesse matters. If you’re outfitting a shop for decking, framing, or masonry, look elsewhere. If you want a compact, capable, USB-C–charged drill that lives on the kitchen counter or workbench and is ready for 90% of household tasks, this hits the mark.

Reliability and day-to-day experience

The brushless motor has been consistent, and the electronic controls never glitched during my time with it. The lockout is useful for preventing accidental starts when the drill is in a bag, and the side direction indicator removed guesswork more often than I expected. The compact nose helps you get square to a surface even in cramped cabinets. After a few projects, the ergonomics stood out more than the specs: the balance, the trigger control, and the short length make it feel precise.

Final recommendation

I recommend the K2 Ultra for homeowners, hobbyists, and anyone who wants a compact, well-thought-out drill/driver that leans into control and convenience. It combines a capable 30 N·m brushless drive, clear electronic modes, and a genuinely useful stand with integrated bit storage. The USB-C charging and intuitive interface make it easy to live with, and the 3/8-inch keyless chuck handles the broad mix of bits most people use. It’s not built for heavy construction, and the non-removable battery won’t suit every scenario, but for everyday drilling and driving in wood, plastic, and light metal, it’s a smart, modern take on the household drill that I kept reaching for first.