Skil 120 piece Drilling and Driving Set with Bit Grip

Why I reached for this Skil set

I keep a few compact bit kits in my bag for quick installs and punch-list fixes, but I wanted a single case that could cover most drilling and driving tasks without a lot of rummaging. This Skil set promised exactly that: a broad spread of 1-inch inserts, 2-inch power bits, a handful of nut drivers, wood-boring spade bits, and “gold ferrous” twist drills—all organized in a relatively slim case with a couple of magnetic helpers. After several weeks of cabinet work, a small deck repair, and a light metal bracket project, here’s how it actually fared.

What’s in the case and how it’s organized

The footprint is bag-friendly at about 11 x 10 x 1.6 inches, and at 3.2 pounds it won’t weigh you down. Inside, the layout is straightforward: the top half carries most of the common 1-inch insert bits and the 2-inch power bits; the bottom half houses the drill bits, spade bits, and nut drivers. Skil includes both a magnetic insert bit holder/driver guide and a Bit Grip magnetic collar designed to slide over a 2-inch impact bit for screw stabilization.

A few details stood out right away:
- Coverage: The mix is oriented toward everyday carpentry, light electrical, and general maintenance. You get the typical Phillips, slotted, square, and Torx assortment, plus nut drivers and wood spade bits. There are no masonry bits and no countersink; if those are routine for you, plan to supplement.
- Redundancy where it matters: Plenty of 1-inch inserts in the sizes that wear fastest, which is the right call for a kit like this.
- Labeling: Bit markings are standard. It’s not a color-coded system, but finding what you need is quick once you’ve used it a few times.

The case itself is compact and closes securely. The internal trays hold bits firmly—sometimes too firmly. With gloves on and a busy workday pace, a few of the inserts take more effort to pop out than I’d like. The upside is they don’t shake loose.

Driving performance

Driving is where this set earns its keep. The 2-inch power bits fit cleanly and hold a screw without noticeable wobble when paired with the included magnetic insert holder. Paired with an 18V impact driver, the bits seated well and didn’t cam out prematurely on deck screws or cabinet hardware. They’re not ultra-premium torsion bits, so if you’re hammering lag screws all day you’ll want something specialized. But for mixed residential tasks—hinges, pocket screws, outlet covers, furniture assembly—the set gets it done with predictable, controlled results.

The Bit Grip collar is the accessory I ended up using more than expected. It snaps over a 2-inch impact bit and adds both magnetic pull and a “rail” to keep screws aligned. It’s particularly helpful overhead or when you need to start a screw one-handed while holding a part or fixture in place with the other. It doesn’t eliminate the need for proper bit engagement, but it tightens up your starts and cuts down on fumbles, especially with smaller screws.

The magnetic insert bit holder/driver guide is the more conventional accessory. It does a credible job catching the screw and curbing wobble. Between the two, I prefer the Bit Grip for stability when starting and the simple magnetic holder for general driving once the screw is established.

Drilling in wood and metal

The set includes “gold ferrous” twist drill bits. In practice, that coating helps with lubricity and heat management but doesn’t magically elevate the base steel. In pine and plywood, the bits track straight and clear chips well. In oak, they still cut cleanly for pilot holes and light through-drilling, but you’ll want to step up sizes for larger fasteners to avoid heat buildup.

The two spade bits cover basic rough-in holes. In softwood, they produce quick, reasonably clean bores. In hardwood, I found I got the best results by letting the bit find its pace rather than forcing it—slow down the RPMs, keep the drill square, and clear chips mid-cut. The cutting edges aren’t aggressive, which is safer for newer users and reduces tear-out on the exit side if you back the work.

For light-gauge steel brackets and aluminum channel, the gold ferrous bits performed as expected for a general-purpose set. A drop of cutting oil and moderate speed kept edges crisp and prevented blueing. If your day job involves lots of stainless or thick mild steel, this kit isn’t meant to be your primary metal set, but it’s perfectly serviceable for occasional metal drilling.

Durability and bit wear

After a few dozen screws in hardwood and composite decking, the most-used Phillips and Torx bits showed normal wear but no chunking or rounding. Expect to cycle the 1-inch inserts first—that’s the nature of insert bits. The 2-inch power bits held up better than I anticipated, especially with the Bit Grip collar minimizing slips at the start.

The twist drills retained their edges over a handful of projects. They’re not brittle, which I appreciate; I’d rather hone a modest edge than snap a glass-hard tip. Store them in the case and keep them clean—this isn’t the set to toss loose into a toolbox.

Real-world conveniences (and a couple of annoyances)

What I liked:
- One case, most tasks: For small installs and punch lists, I didn’t need to supplement with other driving kits.
- Magnetic helpers: The Bit Grip collar is genuinely useful for one-handed starts and awkward angles.
- Thoughtful selection: The five nut drivers and the longer power bits cover a lot of ground for cabinetry, HVAC brackets, and general fix-it jobs.

What I’d improve:
- Tray tension: Some slots pinch the bits a little too tightly. It’s a small frustration when you’re bouncing between sizes.
- Range of wood bits: Two spade sizes cover basics, but a third size would reduce tool changes on common rough-ins.
- Specialty gaps: No countersink, no masonry. Not a flaw, just something to be aware of if your work crosses those lines often.

Value

For the price point, the Skil kit sits in a sweet spot. You’re not paying a premium for contractor-tough torsion bits or cobalt drills, but you’re getting a genuinely complete everyday kit with useful accessories and a compact footprint. Compared with building a piecemeal bit collection from nicer individual sets, this is a simpler, more affordable way to get 90% of the way there for general residential work.

Who it’s for

• Homeowners and DIYers who want a single grab-and-go case that covers most tasks around the house.
• Pros who need a backup kit or a truck-box set to handle unexpected fasteners and quick pilot holes.
• Installers working mixed materials—wood, light metal, composites—who benefit from a wide bit assortment and a reliable magnetic setup.

Who should look elsewhere:
- Trades doing heavy-duty metal drilling or stainless day in, day out.
- Finish carpenters who rely on ultra-clean countersinks and specialty wood bits.
- Masons or anyone drilling concrete and tile regularly.

Final thoughts and recommendation

After using this Skil set on a mix of jobs, I trust it as a compact, capable companion for drilling and driving. The magnetic Bit Grip collar isn’t a gimmick—it improves one-handed starts and helps reduce slips, especially with 2-inch impact bits. The bit selection is practical, the twist drills are honest performers in wood and light metal, and the nut drivers fill common gaps. The case is slim and packable, with retention that errs on the secure side.

It’s not a specialty kit and doesn’t pretend to be. If you need cobalt, torsion-optimized, or masonry-centric assortments, this won’t replace them. But as a one-case solution for everyday tasks, it strikes a smart balance of breadth, performance, and price.

Recommendation: I recommend this Skil set for anyone who wants a well-rounded, budget-friendly kit that actually covers real-world drilling and driving needs. It’s especially worthwhile if you value the convenience of a single organized case and can live without masonry and specialty wood bits. The magnetic accessories add genuine utility, and the overall build quality is solid for the category.