Features
- Cuts right-hand external threads
- Intended for threading rods, bolts, and studs
- Heat-treated carbon steel construction for durability
- Hex shape for use in die stocks and adjustable wrenches
- Resistant to rust and tarnishing
- Precision machining for a tight fit
- Laser-etched marking for size and starting-side identification
- Flute design for chip clearance
Specifications
Size And Thread | 10 - 24 |
Standard | NC |
Material | Heat-treated carbon steel |
Finish | Metal, rust- and tarnish-resistant design |
Thickness | 0.370 in |
Width Across Flat | 1 in |
Pack Quantity | 1 |
Product Dimensions | 0.32 in x 1.81 in x 5.88 in |
Weight | 0.08 lb |
Warranty | 1 Yr |
Upc | 000346621549 |
Related Tools
Related Articles
Hexagon die for cutting right-hand external threads on rods, bolts, and studs. Made from heat-treated carbon steel with precision machining. Laser-etched markings indicate size and starting side.
Model Number: BHD1024
Project Ideas
Business
Custom-Length 10-24 Studs and Rods
Offer an online and local service cutting 3/16 in rod to customer-specified lengths and threading both or single ends with the 10-24 die. Deliver deburred, oiled parts with nuts and washers, ready for installations and repairs.
Small Hardware Repair and Fabrication
Provide on-site or shop-based repairs for fixtures and light equipment that use #10 machine screws. Replace damaged external threads by cutting fresh 10-24 threads on new rod stock, making custom linkage rods, tie-bars, and studs.
DIY Kit Products
Sell packaged kits—pegboard accessory sets, mini press kits, small clamps—featuring pre-cut, 10-24-threaded rods, matching nuts, and clear instructions. Great for makers, schools, and hobby shops.
Custom Standoffs and Spacers
Fabricate bespoke 10-24 threaded standoffs and spacers for signage, retail displays, and electronics mounting. Use the die to create consistent external threads on cut rod, pair with turned or off-the-shelf spacers, and finish to spec.
Facilities Fastener Support
Contract with property managers and maintenance teams to supply and stock commonly needed 10-24 threaded studs, hangers, and connectors cut to length. Quick turnaround avoids delays when specific lengths or thread quality are required.
Creative
Modular Pegboard Accessories
Bend 3/16 in steel or brass rod into hooks, shelf brackets, and tool holders, then use the 10-24 die to thread the rod ends. Secure to pegboard backers with 10-24 nuts, wing nuts, and spacers for adjustable, swappable shop storage.
Adjustable Articulated Desk Lamp
Build a compact lamp with rod linkages and pivot blocks. Cut 10-24 threads on rod ends to accept knurled knobs and lock nuts at each joint. The threads let you fine-tune tension and replace parts easily.
Custom Drawer Pulls and Wall Hooks
Turn or carve decorative knobs/hooks from wood or metal, epoxy a short 10-24 threaded stud you cut with the die into each piece, and mount with matching machine screws from the backside of drawers or through-wall anchors.
Mini Bookbinding or Etching Press
Make a tabletop press using two plates and four vertical posts. Thread the ends of 3/16 in rod to 10-24 so you can tighten with wing nuts or knurled nuts, providing even clamping pressure for small books, prints, or leatherwork.
Kinetic Balance Sculpture
Create a mobile with counterweights that slide on short sections of 10-24 threaded rod. Use the die to cut clean threads so weights lock in place with nuts, letting you precisely balance and reconfigure the sculpture.