DeWalt Track Saw Track Bag

Why I wanted a dedicated bag

My track saw rails are among the most finicky things I transport. The edges need to stay straight and clean, the splinter guard hates being knocked around, and the aluminum doesn’t enjoy rolling around the back of a truck. A soft-sided case isn’t going to stop catastrophic damage from a crushed load, but a good one will keep rails organized, protected from scratches and grime, and easier to carry. That’s exactly what I’ve been using the DeWalt track bag for, and it’s become my default way to get rails to and from site.

Build quality and design

This is a simple, black, soft-sided case purpose-built for long rails. It’s lightweight at roughly 1.3 pounds, which matters when the thing you’re carrying is already long and awkward. The overall silhouette is slim (about 13 inches wide and under 3 inches thick), so it slides behind a truck seat and hangs neatly on a wall without hogging space.

Inside the main compartment, there are Velcro tie-down straps that secure rails to keep them from clanking together. I found those straps especially useful with two rails—no rattling, and less chance of the splinter guard getting scuffed by a wayward edge. On the outside, there’s a small accessory pocket. It’s not cavernous, but it’s big enough for clamps, a track connector, an Allen key, and even a router adapter if you use one. That pocket alone has saved me more than one “where did I leave that joiner?” moment.

One note on published dimensions: you’ll occasionally see a misleading length figure online. In use, this is very clearly a full-length bag intended for 59-inch rails, and it swallows a 46-inch rail with room to spare. My 59-inch rail fits without forcing the zipper, and there’s just enough buffer that I don’t feel like the zipper is fighting the corners.

Fit and capacity

• Fits DeWalt’s common 46-inch and 59-inch rails as advertised
• Internal tie-downs keep multiple rails separated and secure
• External pocket carries clamps and small hardware

I’ve routinely carried a 59-inch rail and a 46-inch rail together, and the bag handled that pairing well. Two full-length 59-inch rails will also fit, but you’ll want to use the internal straps and be mindful about how you position the splinter guards so they don’t rub. With more than two rails, it gets cramped and heavy quickly—this bag is best for one to two rails plus essentials.

The accessory pocket is a thoughtful touch, but it’s shallow. It handles rail clamps, a connector bar, and an Allen wrench with ease; throw in bulkier items and you’ll notice the pocket printing through the soft shell. I wouldn’t stash batteries or larger routers accessories there.

Protection in the real world

This is a soft case designed to prevent the everyday damage that actually happens: scuffs, grit, paint overspray, and the occasional bang against a door jamb. For that role, it works. My rails stay clean, splinter guards remain intact, and I don’t see the usual nicks from being tossed onto a shelf or sliding around in a van.

There is, however, minimal padding at the ends. That’s the one area I watch closely. Sharp rail corners will eventually win against fabric if you drag or drop the bag on its end, especially on concrete. I haven’t punched through, but I’ve seen slight wear marks at the corners after a few site months. Two simple habits solve most of it:

• Add end protection: a bit of dense foam, a cut-down pool noodle, or 3D-printed end caps for your rails before they go in the bag.
• Load with splinter guards facing inward and corners aligned so they don’t concentrate pressure on one spot.

If you’re expecting hard-case-level protection from crushes or heavy impact, this isn’t that. It’s a tidy, lightweight, soft transport solution—great for day-to-day use, not a substitute for a rigid case in the back of a tool trailer under other gear.

Organization and small parts

Organization is where the bag quietly pays for itself. The internal Velcro straps are the unsung heroes: they keep rails from migrating, which keeps edges straight and the splinter guard from getting peeled. The exterior pocket reduces the number of loose accessories rolling around your boxes. I keep both clamps, the joiner bar, and the small wrench there. They’re now always with the rails instead of stranded in a different systainer.

One practical tip: label the outside pocket with a paint pen for the specific rail set you keep inside (e.g., “59 + 46 + clamps”). That way, you grab once and go.

Portability and storage

Because it’s light and slim, the bag is easy to carry and stash. I can slide it into narrow spots behind a bench, and it rides flat along the side of a van without eating cubic feet. The soft shell also means it won’t scratch painted surfaces if it shifts. For shop use, it’s also cleaner: rails aren’t exposed to sawdust and finish overspray, and I’m not wiping them down as often.

I would have loved slightly beefier end reinforcement for peace of mind when standing the bag vertically. As is, I try to store it horizontally or at least ensure it’s resting on a flat surface rather than a corner.

Durability and wear points

Fabric, stitching, and zippers all matter on a long, awkward load. The stitching on my bag has held up fine, and the zipper track runs the full length smoothly without snags. As mentioned, the only wear-prone spots are the ends. If your work has you dragging gear across jobsite concrete, consider adding DIY end caps or padding the inside at the tips. Keep the rails clean before they go in; aluminum dust and grit inside any fabric bag will accelerate abrasion over time.

Specs and warranty at a glance

• Color: Black
• Weight: about 1.32 lb (21 oz)
• Approximate length: built to carry 59-inch rails; also fits 46-inch rails
• Exterior pocket: for clamps and small accessories
• Warranty: 3-year limited, 1-year free service, 90-day satisfaction guarantee

DeWalt’s standard warranty on an accessory like this is a nice safety net if you encounter a manufacturing defect. It doesn’t cover normal wear, so treat the ends with care.

Value and alternatives

You can transport rails in the cardboard sleeves they ship with or wrap them in a moving blanket. Both work for a while, but neither keeps small accessories with the rails, and neither organizes multiple rails particularly well. Hard cases exist, but they’re heavier, more expensive, and bulkier than necessary for most day-to-day carpentry and cabinet installs. The DeWalt track bag hits a practical middle ground: inexpensive protection, quick organization, and minimal bulk.

If you routinely carry assembled long rails or transport them under other heavy tools, a rigid case is safer. If your rails rarely leave the shop, wall hooks might be enough. For everyone else who’s on the move with one or two rails, a soft bag like this pays for itself in saved time and fewer nicks.

Who it’s for

• Mobile carpenters and installers who bring rails to site and want them clean, straight, and organized
• Hobbyists who don’t have wall space and store rails in closets or under benches
• Anyone who wants clamps, joiners, and the rails in one grab-and-go package

Recommendation

I recommend the DeWalt track bag. It’s a straightforward, lightweight way to protect 46- and 59-inch rails, keep accessories with the rails, and make transport less of a hassle. The internal Velcro straps and the exterior pocket are genuinely useful, and the bag’s slim profile makes it easy to store. The only real limitation is end protection: it’s a soft case without reinforced end caps, so plan to add simple padding if you’re tough on gear or stand the bag vertically. For most users, the convenience and everyday protection far outweigh that caveat, and the warranty coverage is a reassuring bonus.