Features
- Control-cut shoulder geometry to reduce kickback
- Micrograin carbide-tipped teeth for improved wear and impact resistance
- Speed-coat finish to reduce friction and pitch buildup
- Thin kerf to remove less material and reduce waste
- Hardened steel plate to resist bending and deflection
- 40-tooth configuration for balance of cut speed and finish
Specifications
| Diameter | 10 in. |
| Teeth | 40 |
| Kerf | 0.085 in. (approx. 2.15 mm) |
| Arbor | 5/8 in. |
| Tooth Material | Micrograin carbide tips |
| Coating | Speed coat finish |
| Plate Material | Hardened steel |
Related Tools
Related Articles
10-inch, 40-tooth table saw blade intended for general-purpose ripping and crosscutting with a focus on smooth finishes. It uses carbide-tipped teeth and a hardened steel plate to maintain edge life and resist bending. The blade has a thin kerf to reduce material waste and a coated finish to limit friction and pitch buildup. Control-cut shoulder geometry is used to help limit kickback.
Model Number: 75240
Project Ideas
Business
Custom Closet & Shelving Cut-to-Size
Offer sheet-goods breakdown and precision panel cutting for closets and home offices. The 40T blade handles plywood and melamine cleanly, reducing chip-out and rework; the thin kerf and stable plate increase yield and accuracy per sheet.
DIYer Lumber and Plywood Sizing Service
Set up a local service that dimensions customers’ materials to cut lists. Faster turnaround with minimal sanding thanks to smooth general-purpose cuts; advertise reduced waste from thin-kerf efficiency and consistent, square cuts.
Acoustic Diffusers and Slat Wall Panels
Produce slatted wall treatments and QRD/half-lap diffusers with repetitive, consistent rips and crosscuts. The blade’s control-cut geometry helps maintain safety during long repetitive runs, and the smooth finish lowers post-processing time.
Picture Frames & Gallery Rails
Sell custom frames and matching gallery hanging rails. Clean mitered frames in hardwoods or veneered stock benefit from low tear-out and minimal sanding, speeding up production and improving margins.
Small-Batch Furniture Line
Launch a line of simple, flat-pack stools, benches, and side tables optimized for repeatable table saw workflows. Leverage the blade’s thin kerf to boost yield per board and the micrograin carbide tips for long service life between sharpenings.
Creative
Mid-Century Slat Bench
Build a classic slatted bench using repetitive rips and crosscuts in hardwood. The 40-tooth blade delivers smooth faces on both rips and crosscuts, reducing sanding on the many slats and stretchers. The thin kerf minimizes material loss across dozens of cuts, and the control-cut geometry helps keep long rip cuts stable.
Edge-Grain Cutting Board
Rip strips from contrasting hardwoods, then crosscut and re-glue for an edge-grain board with tight glue joints. The blade’s thin kerf saves expensive stock, while the micrograin carbide teeth leave glue-ready edges that require minimal jointing.
Tapered-Leg Side Table
Use a taper jig to create elegant table legs and a clean apron. The balanced 40T configuration provides a fine surface on tapered rips, and the hardened plate limits deflection so tapers remain consistent across all legs.
Splined Miter Picture Frames
Cut precise miters for frames and add decorative spline slots with a simple jig. The blade’s smooth crosscutting reduces tear-out on miters (even in veneered stock), and the thin kerf spline slots look refined without over-removing material.
Geometric Wall Art Panel
: Create a mosaic of angled hardwood tiles or kerf-bent panels. The speed-coat finish helps cut resinous woods cleanly, and the blade’s consistent, smooth finish keeps the pattern tight with crisp edges that pop under finish.