Features
- 5/8 in (16 mm) polydac twisted rope
- Locking alloy steel snap hook on anchor end (zinc plated / passivated)
- Other end cut and taped
- Abrasion, wear and water resistant rope construction
- Minimum breaking strength 5,000 lb (≈23 kN)
- Snap hook gate rated to 3,600 lb (≈16 kN)
- Rated capacity 310 lb (140 kg)
- Meets ANSI Z359.1-2007 and OSHA 1926.502 / 1910.140
- 2-year manufacturer warranty
Specifications
| Cable Length (Ft) | 25 |
| Rope Length (M) | 7.6 |
| Rope Diameter (In) | 5/8 |
| Rope Diameter (Mm) | 16 |
| Rope Material | Polydac (polyester-blend / high-strength twisted rope) |
| Snap Hook Material | Galvanized alloy steel (zinc plated / passivated) |
| Minimum Breaking Strength | 5,000 lb (23 kN) |
| Snap Hook Gate Strength | 3,600 lb (16 kN) |
| Rated Capacity | 310 lb (140 kg) |
| Weight | 4.23 lb (1.92 kg) |
| Standards | ANSI Z359.1-2007; OSHA 1926.502 and 1910.140 |
| Included | Locking snap hook |
| Returnable | 90-Day |
| Manufacturer Warranty | 2 Year |
25 ft (7.6 m) vertical lifeline constructed with 5/8 in (16 mm) polydac twisted rope. One end has a locking snap hook (alloy steel, zinc plated / passivated); the other end is cut and taped. Designed for use in fall-protection/roof-safety systems. Meets applicable OSHA and ANSI standards and includes a 2-year manufacturer warranty.
Project Ideas
Business
Weekend Roof Safety Kit Rentals
Rent out residential fall-protection kits (lifeline, 5/8 in rope grab, harness, shock lanyard, ridge anchor, and instructions). Offer Friday–Monday pricing, optional delivery, and a short on-site briefing. Include a QR code for setup videos and digital waivers. Upsell roof brackets, toe boards, or shingle pads.
Residential Anchor Install + Training
Provide permanent or temporary roof anchor installation and a 30–45 minute homeowner training on safe tie-off, rope grab use, and inspection. Leave behind a tagged 25 ft lifeline, compliance paperwork, and a fall-clearance chart. Offer annual re-inspections and re-certification as a subscription.
Solar/Gutter Service with Visible Safety
Differentiate a solar panel cleaning, gutter cleaning, or moss removal service by branding around OSHA/ANSI-compliant fall protection. Technicians deploy the vertical lifeline on every job; market it as a ‘Safety-First’ guarantee with before/after photos. Command premium pricing and reduce liability.
Fall-Protection Compliance + Gear Bundles
Sell OSHA/ANSI-compliant roof kits to small contractors: 25 ft lifeline, 5/8 in rope grab, harness, shock lanyard, anchors, and inspection tags in a weatherproof bag. Pair with a paid on-boarding session, site-specific fall-clearance worksheets, and a QR-based inspection log system.
Pop-Up Training and Demos
Run hands-on demos at hardware stores and trade schools using a training stand to show proper lifeline setup, connector checks, and rope grab operation. Sell kits on-site, book anchor-install appointments, and offer a discounted first inspection to convert attendees into customers.
Creative
Rooftop Safety Kit-in-a-Bucket
Build a grab-and-go roof work kit using a sturdy 5-gallon bucket with a custom foam/ply insert to neatly stage the 25 ft polydac lifeline, a compatible 5/8 in rope grab, harness, shock-absorbing lanyard, and a removable ridge anchor. Add a checklist lid decal and QR code to your digital inspection log so every deployment stays OSHA/ANSI compliant.
Lifeline Storage Reel + Inspection Station
Make a wall-mounted reel with a smooth-radius drum to store the 5/8 in lifeline without kinking. Include a fold-down inspection tray with a built-in ruler, bright task light, and dry-erase board to note dates, snap-hook gate checks (3,600 lb rating), rope wear points, and cleaning. Keeps the rope clean/dry and speeds pre-use inspections.
Ladder-to-Roof Clip-In Assist
Create a telescoping pole with a captive carabiner guide that lets you clip the lifeline’s locking snap hook to a pre-set ridge anchor before stepping off the ladder. Add a quick-release cradle to store the pole on the ladder and a hi-vis flag on the anchor point to verify connection from the ground.
Treehouse/Deck Build Safety Setup
Set up a temporary vertical lifeline anchored above the work area while building or maintaining a treehouse or elevated deck. Pair with a 5/8 in rope grab and harness to maintain 100% tie-off during cutting, decking, or railing install. Create a laminated site plan showing anchor location, fall-clearance, and swing hazard notes.
Photo/Inspection Roof Workstation
Assemble a compact roof-access kit for photographers, drone pilots, and inspectors: the 25 ft lifeline, rope grab, harness, and a lightweight ridge anchor with a soft gear bag that won’t scuff shingles. Add a camera tether point and a mini tool lanyard board to keep accessories secured while moving on pitch.