Ring Spare Parts Kit for Video Doorbell

Why I picked up this kit

Moving homes meant taking my original Ring Video Doorbell (1st Gen) with me. What I didn’t take—because I couldn’t find them—were the tiny screws and the mounting bracket I’d tucked away “somewhere safe.” Rather than piecing together odd hardware from the garage, I grabbed Ring’s spare parts kit. It’s a straightforward bundle, but it turned out to be exactly what I needed to get the doorbell mounted cleanly and working again without a single trip to the hardware store.

What’s included (and why it matters)

The kit is a tidy collection designed specifically for the first‑gen Ring Video Doorbell. Inside, I found:
- A double-ended screwdriver that fits both the standard screws and the Ring security screws
- A replacement mounting bracket
- Security screws and regular mounting screws
- A drill bit and wall anchors
- Spade connectors and wire nuts for doorbell wiring
- A USB charging cable for the doorbell’s battery
- A couple of security stickers
- All in black, which blends in fine behind the doorbell

The completeness is the selling point. The screwdriver is better than I expected for a pack-in tool—compact, grippy enough, and properly sized for Ring’s security screws, which are easy to strip if you use the wrong bit. The inclusion of wire nuts and spade connectors is handy if you’re hardwiring to existing doorbell leads. And the new mounting bracket is a lifesaver if your original is bent, stripped, or missing.

Installation experience

I mounted the bracket first. The included drill bit is adequate for pilot holes in wood and drywall; for true masonry or older brick, I’d recommend using a hammer drill with a proper masonry bit (not unique to this kit—more a general best practice). The included anchors seat well in drywall and basic masonry block, and the mounting screws bite without tearing.

Once the bracket was on, I connected the doorbell leads. The spade connectors help create tidy, repeatable connections; they slide neatly over the back terminals. If your existing wires are short, the wire nuts make extension straightforward. There’s no crimping tool in the kit, so if you’re refreshing old, brittle wires, bring basic wire strippers or a multi-tool.

The faceplate security screws are usually the fussy part. With this kit, the driver fits the security screws snugly, and I had no issues with cam-out. My usual tip: don’t over-torque; snug is enough. Over-tightening can deform plastic housings or make future service harder than it needs to be.

Finally, the included USB cable means you can top off the doorbell battery before you button everything up. It’s a small thing, but having the right cable in the same box prevents rummaging for chargers at the worst time.

From unboxing to a fully mounted doorbell, I was done in under 25 minutes—no improvising, no mid-job store run.

Fit and compatibility

This is a model-specific kit. It’s made for the Ring Video Doorbell (1st Gen), and that specificity shows in the fit. The bracket matches the footprint and screw spacing exactly, and the security screws line up perfectly with the faceplate.

A practical note: Ring has several doorbell models that look similar. If you’re not sure which one you have, check the device details in the Ring app or on the back of the device. If you’re not using the first-gen unit, look for the model‑specific spare parts kit instead. Using the wrong bracket is a recipe for frustration—misaligned holes, rattling housings, and security screws that don’t seat right.

Build quality and small touches

For a replacement kit, the build quality is solid. Threads are clean, the screws are properly hardened for their size, and the bracket didn’t flex or warp under load. The driver doesn’t feel premium, but it does the job without chewing up screw heads. I appreciated that the kit components were grouped in small bags; it keeps the microscopic hardware from disappearing into the nearest floorboard gap.

The security stickers are optional garnish, but they’re a nice inclusion if you like a visual deterrent. The black color scheme is unobtrusive once installed—most of it is hidden behind the device anyway.

Where it falls short

A few limitations to keep in mind:
- Model lock-in: This kit is only for the Ring Video Doorbell (1st Gen). That’s by design, but it means you must confirm your model before buying.
- Instructions: There’s no detailed printed guide in the box. If you’re new to DIY, you’ll likely rely on Ring’s online or in-app tutorials. They’re good, but a quick “start here” slip would reduce friction.
- Drilling in masonry: The included bit is fine for basic materials. For old brick or poured concrete, use a hammer drill and a proper masonry bit. Consider that a general installation recommendation rather than a knock on the kit.

None of those are dealbreakers, but they’re worth knowing so you can plan accordingly.

Everyday practicality

A spare parts kit isn’t glamorous. Where it shines is in reducing friction:
- Moving house? Take your doorbell, leave the old bracket, and reinstall with this kit at the new place.
- Lost the tiny security screw (again)? There’s a replacement waiting in the bag.
- Mounting into a different material? You’ve got anchors, a pilot bit, and the correct screws together.
- Need a quick battery top-up before mounting? The charging cable’s right there.

It’s the kind of kit that turns a “this will be a pain” task into a predictable 20-minute job. That reliability is the value.

Tips for a smoother install

• Test fit the bracket before drilling. Mark the holes with a pencil to ensure level alignment, then use the pilot bit.
• If hardwiring, gently tug on existing doorbell wires before committing—if they’re brittle, strip back fresh copper and use the wire nuts.
• Start screws by hand to avoid cross-threading, then switch to the driver.
• Don’t over-tighten the security screws; snug prevents rattle and preserves the head.
• Keep a small container or magnetic tray handy so spare screws don’t wander.

Who will get the most from it

• First‑gen Ring owners who are reinstalling after a move or a remodel
• Anyone who’s missing a bracket, screws, or the Ring security driver
• Landlords and property managers who rotate devices between units
• DIYers who prefer having every required part in one place instead of hunting for equivalents

If you service or reinstall smart doorbells with any regularity, having this on hand eliminates the downtime that comes from one missing part.

Value and verdict

As a bundle, the spare parts kit is well thought out: the exact bracket, the right screws, a properly sized driver, wiring accessories, and a charging cable. Everything fits the first-gen doorbell correctly, and nothing feels like a flimsy throw-in. It’s not a premium toolkit, but it doesn’t need to be—its job is to get your device securely mounted and serviceable with zero guesswork.

Recommendation: I recommend this kit to anyone using a Ring Video Doorbell (1st Gen) who needs to install, move, or service their unit. It’s inexpensive insurance against lost or worn hardware, it saves time, and it ensures a correct, solid fit. Just verify your model before you buy and, if you’re drilling into tough masonry, have a proper bit and drill on standby.