OEMTOOLS OEM24615 72-Inch Work Bench with Storage, Tool Cabinets on Wheels, Garage Tool Box Stainless Steel, Easy Assembly

Why I chose the OEMTOOLS 72-inch workbench

Space is always at a premium in my garage, and I wanted a single, durable station that could handle storage, light fabrication, and ongoing projects without looking like a patchwork of cabinets and carts. The OEMTOOLS 72-inch workbench stood out for its stainless exterior, integrated pegboard and overhead cabinets, and the promise of real mobility on large casters. After several weeks of daily use—loading it with hand tools, power tools, and consumables, mounting a small vise, and reorganizing my wall storage around it—I have a clear sense of where it excels and where it doesn’t.

Setup, assembly, and first impressions

The unit arrived on a pallet, well-braced and strapped. I’d plan for two people and a furniture dolly; the cabinet has real heft. Assembly is straightforward: mount the casters, upright the unit, hang the pegboard and overhead cabinets, and square up the doors. Mine didn’t come with the most hand-holding instructions, but everything was intuitive enough that I didn’t hit any real snags. Expect about 60–90 minutes at a comfortable pace.

Out of the box, the anti-fingerprint stainless finish is the first thing you notice. It’s not a mirror polish—more of a brushed stainless look that hides smudges better than most “garage-grade” stainless pieces. The black aluminum drawer pulls and the consistent panel gaps give it a clean, professional presence. It looks like it belongs in a modern shop.

Build quality and construction

The chassis is 430 stainless steel with an anti-fingerprint finish. Panels are rigid with minimal oil-canning, and the cabinet squares up properly when leveled on the casters. The doors on the overheads are supported by gas struts that open smoothly and stay put. If you tug one side of an overhead door, there’s a touch of flex—typical for a wide, thin stainless panel—but the hinges and struts keep motion controlled.

The drawers use full-extension slides with a 100 lb load rating. Fully loaded with sockets, wrenches, pliers, and fasteners, they glide smoothly and don’t rack or bind. The slides have a positive “closed” detent that prevents accidental opening when you roll the bench or bump it. I added drawer liners, and the combination makes a satisfying, rattle-free close.

The 5" x 2" casters are substantial. Two lock; all four spin smoothly. On sealed concrete, the bench rolls without drama even when loaded. The caster frames have grease fittings, which I appreciate for longevity. This is a big step up from the undersized hard-plastic wheels you often see on consumer-grade benches.

Storage layout and organization

Storage is where this bench earns its footprint. You get 11 drawers, a two-door cabinet, and an 18-inch pegboard framed by overhead cabinets. The drawer mix includes several shallow drawers for hand tools and bits, plus a couple deeper drawers that handle sanders, drills, and boxed accessories. I would have liked one extra-wide drawer for long specialty tools or layout gear, but between the shallow/deep options and the cabinet bay, I found good homes for most items.

The overhead cabinet space is the standout. I keep safety gear, abrasives, and consumables up there—items I access often but don’t want cluttering the work surface. The doors swing up smoothly, the struts hold them firm, and the interior shelves don’t ping or drum when loaded. If you routinely store tall bottles or long handled tools above the bench, you may max out the vertical clearance; for common shop items it’s fine.

The pegboard is standard fare and a welcome addition for quick-grab items. I mounted frequently used pliers, hex key sets, and a few screwdrivers there. Because the overheads sit directly above, the usable height is capped, so extra-long items are better kept in drawers or on a separate wall board. Still, for daily drivers, the pegboard is a productivity booster.

Work surface and real-world use

The worktop is sturdy and stable under typical bench tasks: layout, assembly, drilling, and light metalwork. I mounted a compact 3–4 inch vise by drilling through the top and using a proper backing plate underneath. For light clamping, filing, and occasional hammer taps, the bench remains planted and doesn’t telegraph flex. Keep your expectations appropriate—this isn’t a blacksmithing stand—but for a garage or light fabrication bench, it’s fully capable.

The finish on the top resists fingerprints and cleans up easily after cutting fluids, adhesives, and marker. I use a thin sacrificial mat when I’m doing repeated knife work or pounding to keep the surface presentable over the long haul.

Mobility and footprint

At 72 inches wide with a relatively shallow depth, the bench tucks tightly against a wall, leaving enough aisle space in a single-car bay for movement and parking. The casters make repositioning easy for periodic shop reconfigurations, but I wouldn’t choose this as a daily “roll-all-over-the-shop” solution for a production environment. It’s best as a movable but mostly stationary workstation. Once you set the locks, the bench feels planted enough to work aggressively without walking.

Security and locking

The color-coded flat-key locking system is practical for securing drawers and cabinet contents at the end of the day. It’s primarily a deterrent—great for keeping curious hands out or securing the shop in a shared space—but it’s not a high-security vault. The lock engages reliably and doesn’t misalign even when the drawers are fully loaded, which speaks to decent tolerance control in the slides and faces.

Fit, finish, and day-to-day experience

Fit and finish are strong for a bench in this class. The stainless hides smudges better than most; edges are clean; and the black pulls add some visual contrast and grip. The drawers sit square, and the overhead doors open quietly without any gritty hinge feel. Noise-wise, the drawers “click” closed due to the detent, but there’s no clanging, and nothing rattles while rolling if you’ve organized with liners.

One omission you should plan for: integrated power and lighting. I added a magnetic power strip on the side and a pair of rechargeable light bars under the overheads. Those two small mods elevate the station from good to excellent. Cable management is simple with adhesive clips along the back edge.

Limitations and trade-offs

• No integrated power or lighting; add-ons recommended
• Overhead clearance limits very tall items above the work surface
• Drawer layout favors multiple medium widths; there’s no single extra-wide drawer
• While mobile, it’s not intended for constant rolling in a rough, high-traffic shop
• The top is robust for general work, but heavy hammering or abusive clamping isn’t its mission

None of these are deal-breakers for a home garage or light professional bench, but they’re worth noting so you set expectations correctly.

Value and who it’s for

You’re paying for a cohesive, stainless, all-in-one workstation: drawers, cabinet, pegboard, and overheads on a single, mobile chassis. Could you replicate the storage capacity by mixing and matching a toolbox, a separate hutch, and a freestanding pegboard? Probably—though not with this unified look or footprint, and likely not with stainless. For homeowners, hobbyists, and light-duty professional users who want a clean, organized station that won’t feel temporary, the package makes sense. For a heavy-line mechanic who needs wide, specialized drawers or plans to push a fully loaded box across a concrete jungle all day, a dedicated mechanic’s box remains the better tool.

Recommendation

I recommend the OEMTOOLS 72-inch workbench for anyone building a serious, space-efficient garage or shop station who values integrated overhead storage, smooth drawers, and a durable, easy-clean finish. It’s sturdy, thoughtfully laid out, and genuinely improves workflow by keeping tools visible and within reach. Add your own lighting and power, line the drawers, and this bench becomes the reliable hub of a well-organized shop. If your use case demands constant mobility in a rough environment or ultra-wide drawer formats, look elsewhere; otherwise, this is a balanced, long-term solution that earns its floor space.