DeWalt 60V MAX 8-1/4 in. Table Saw Kit

Cordless ripping without dragging a cord across a jobsite is more than a convenience—it changes how often I’m willing to set up and make a cut. That’s the appeal of DeWalt’s cordless table saw: a compact 8-1/4 in. jobsite saw that runs on the FLEXVOLT battery system, carries a surprising 24 in. rip capacity, and lives on a tough roll-cage frame. After putting it to work on punch lists, small built-ins, and outdoor trim, I’ve got a clear sense of where it shines and where it asks for a few compromises.

Build, setup, and first impressions
The saw arrives largely ready to work. The guard, riving knife, push stick, wrenches, fence, and miter gauge all stash securely on-board, so set-up and tear-down are quick. The metal roll-cage is stout and inspires confidence when you’re tossing the saw into a truck bed. At 48 lbs, it’s manageable to carry using the integrated handle, though pairing it with a rolling stand makes longer moves and frequent relocations far easier. The footprint is compact, and the height works fine on a benchtop or jobsite stand.

DeWalt coats the table to reduce friction and it does feel slick; stock advances smoothly once the blade is up to speed. My table was acceptably flat for a jobsite saw, though like most tools in this class, it’s not a machined cast-iron top. I made minor tweaks to square the fence and dial in 90°/45° stops; once set, the adjustments held through a week of bouncing between sites.

Fence and capacity
DeWalt’s rack-and-pinion telescoping fence system remains one of the best reasons to choose this platform. It’s smooth, positive, and repeatable. The scale stayed honest across its travel, and micro-adjustments are easy without that annoying “last nudge” drift common to clamp-style fences. Rip capacity extends to a full 24 in., so breaking down 4x8 sheet goods into cabinet parts or deck fascia strips is practical without a track saw. On the left, you’ve got 12 in. of capacity.

One design quirk to note: you get a single miter slot. It’s usable for simple crosscuts with the included gauge, but it limits off-the-shelf sled options. If you rely on dual-runner sleds, plan to build around a single runner or bring a separate crosscut solution.

Performance and runtime
The brushless motor spins an 8-1/4 in. blade at 5800 rpm. In use, the saw feels snappy on sheet goods, trim, and composites. It’s quieter than comparable corded saws—still a table saw, but less shriek when you pull the trigger. On 3/4 in. plywood and MDF, the saw tracked straight, and the motor didn’t hunt or bog if I kept a steady feed rate.

Ripping 2x lumber is possible but asks for a sharp blade and a measured pace. I could work through construction 2x stock cleanly, though the saw made it clear when I pushed too hard. For occasional framing cuts on a deck or porch repair, that’s fine. For production ripping or dense hardwoods, a corded jobsite saw with a larger blade and more headroom still wins.

Battery behavior is predictable for a FLEXVOLT tool. The included 6Ah pack gets a respectable number of cuts in sheet goods; count on a handful of moderate rips and a couple of dozen panel cuts before you’re ready to recharge. As the battery depletes, you can feel a slight sag in punch—nothing sudden, but you notice it when the cut loads up. Swapping to a higher-capacity pack improves both runtime and the “staying power” under load. The fast charger does turn batteries around quickly, but if you’re mobile all day, bring a second battery.

Cut quality and accuracy
Out of the box, the stock blade is serviceable for general carpentry. For face frames, casework, or prefinished trim, an upgraded thin-kerf blade makes a noticeable difference in tear-out and push effort. With a better blade, edge quality on veneered plywood was clean enough for paint-grade cabinets straight off the saw; for stain-grade, I’d still plan on a light pass with a block plane or sander.

The blade height and bevel adjustments are positive and quick. The bevel scale is consistent once calibrated, and the saw held its angle through repeated tilts. The riving knife alignment was true to the blade after a quick adjustment, which helps keep cuts straight and reduces burning.

Safety and ergonomics
The modular guard and non-through riving knife are easy to install tool-free, so there’s no excuse to leave them off. The guard’s transparency is good, and the anti-kickback pawls engage easily without being grabby on exit cuts.

The power switch uses a push-button system with a safety cover and a power-loss reset feature that prevents an accidental restart if the battery is re-seated while the switch is left on. It’s very safe, but it can interrupt your rhythm if you’re making repetitive cuts—especially if the cover drops and taps the off button as you’re repositioning stock. Once you get used to lowering the cover gently, it’s a non-issue, but it’s a different feel than the classic paddle you may be used to.

Dust collection
Hooked to a shop vac via the 2-1/2 in. port, dust capture is better than average for a small jobsite saw. The shroud around the blade does a decent job at the source. It’s not a closed cabinet, so expect some chips escaping, but I was comfortable cutting indoors with a vac on and minimal cleanup afterward. Without extraction, it behaves like any open jobsite saw—dusty.

Portability and jobsite use
This is where the saw earns its keep. The absence of a cord matters on real jobs: fewer trips running power, less tripping hazards, and setup in tight or finished spaces without hunting for outlets. The roll-cage shrugs off scrapes, and the form factor is easy to stash in a van. I mounted mine on a rolling stand for most tasks, but it’s stable enough on a bench if space is tight. Note that the mounting bolt size may differ from older DeWalt stands; have a small assortment of hardware handy.

Gripes and limitations
- Power is adequate, not endless. For heavy ripping in thick hardwoods or all-day production, step up to a corded jobsite saw.
- Single miter slot limits sled options.
- The stock miter gauge is rudimentary; budget for an upgrade if you do precise crosscut work.
- The switch cover can inadvertently shut the saw off if dropped; it’s a safety-positive design with a small learning curve.
- The kit’s single 6Ah battery is a fine starter, but the saw benefits noticeably from higher-capacity packs and having a spare on hand.
- No plug-in option. This is pure battery operation by design.

What it does exceptionally well
- The fence is a standout—fast, accurate, and confidence-inspiring.
- Portability and setup speed are excellent.
- Rip capacity is generous for an 8-1/4 in. saw, making it genuinely useful for sheet goods.
- On-board storage is well executed; you actually keep the guard and tools with the saw.
- Smooth cutting action with low vibration and a quieter tone than many corded peers.

Who it’s for
This saw fits remodelers, trim carpenters, punch-list crews, and serious DIYers who value mobility and clean, accurate cuts on typical jobsite materials. If you work in occupied homes, on decks, or in spaces where cords are a hassle or a hazard, it’s a productivity booster. If your day involves ripping bunks of framing lumber or thick hardwoods, you’ll want a corded companion.

Recommendation
I recommend the DeWalt cordless table saw for light-to-medium-duty professional work and for anyone who prioritizes portability without sacrificing fence accuracy and practical rip capacity. It’s reliable in sheet goods, respectful of your hearing, and thoughtfully built for the realities of jobsite life. Pair it with a higher-tooth-count blade for cleaner cuts and keep a second high-capacity FLEXVOLT battery in your kit. If your workflow leans toward continuous, heavy ripping or cabinet-grade precision without post-processing, a larger corded jobsite or shop saw remains the better tool. For everything else, especially where mobility matters, this cordless saw earns its place on the truck.