SDS-plus Stop Bit

Features

  • SDS-plus shank for compatibility with SDS-plus rotary hammers
  • Carbide-tipped cutting tip for masonry drilling
  • Integrated stop to limit drilling depth
  • Single-piece design, sold in single-pack quantities

Specifications

Shank Type SDS-plus
Tip Material Carbide
Pack Quantity 1
Diameter (D) (Inch) 3/8
Total Length (L2) (Inch) 4
Working Length (L1) (Inch) 1 1/16

A masonry stop bit with an SDS-plus shank intended for use with SDS-plus rotary hammers. The tip is carbide-tipped for cutting into masonry materials. The 'stop' feature limits penetration depth for repeatable hole depths.

Model Number: HCSTP2061

Project Ideas

Business

Magnetic Signage Install Service

Offer a facade-friendly service epoxying 3/8 in neodymium magnets flush into mortar for restaurants, boutiques, and offices. Clients get clean, reversible mounting points for menus, plaques, and seasonal signs; the stop bit guarantees uniform embedment and a professional finish.


Event Lighting Anchor Grid

Pre-install a hidden grid of shallow anchor points on brick or block venues to enable fast setup of string lights, banners, and decor. Sell as a package with layout, drilling, hardware, and a maintenance plan; the integrated stop speeds up drilling and ensures consistent hook seating.


Low-Voltage and Cable Routing

Provide neat cable and conduit strap installs on masonry for cameras, Wi-Fi, access control, and signage power. The 3/8 in stop bit delivers uniform-depth holes for anchors, reducing mistakes and time on-site; price per drop with add-ons for labeling and cleanup.


Masonry Mount Kit Rental/Sales

Rent or sell a turnkey kit (SDS-plus hammer, 3/8 in stop bit, layout template, anchors, screws, PPE) to homeowners and small businesses mounting shelves, hose reels, and fixtures to brick. Upsell on-site layout and drilling as a premium add-on.


Depth-Certified Fixture Mounting

Specialize in documented, repeatable embedment for safety signage, extinguisher cabinets, handrails for short runs, and utility clips on masonry. Use the stop bit to standardize 1 in embedment where specified, provide photo and measurement logs, and market to property managers and facility maintenance teams.

Creative

Magnetic Brick Gallery

Drill 3/8 in x ~1 in recesses into mortar joints and epoxy 3/8 in cylinder magnets flush. The SDS-plus stop bit gives repeatable depth so every magnet sits perfectly and holds frames, small shelves, or seasonal decor without visible screws.


Outdoor Dowel Peg Wall

Lay out a grid on a brick or block wall and drill uniform 3/8 in holes to 1 in depth. Epoxy 3/8 in hardwood or composite dowels to create a customizable peg wall for planters, tools, or art; the integrated stop keeps peg lengths consistent for a clean, modular look.


Paver Game Boards

Turn concrete pavers into garden game boards by drilling evenly spaced 3/8 in x 1 in seats for marbles or pegs (tic-tac-toe, solitaire, or Nine Men’s Morris). The carbide tip cuts cleanly in masonry and the stop prevents blow-through on thinner pavers.


Hidden Micro-Cache

Create a discreet geocache or note hide by drilling a 3/8 in hole about 1 in deep in a mortar joint and inserting a snug vial or capped tube. The depth stop ensures a pocket that is deep enough to conceal, but not so deep that it compromises the wall.


String-Light Anchor Route

Drill consistent-depth holes for 3/8 in nylon anchors to mount small hooks and route patio string lights precisely. The repeatable depth keeps anchors seated flush and reduces the risk of over-penetration in thin masonry.