PULITUO 'S 20V Cordless Drill/Driver, Electric Screwdriver - 2 Batteries, 30Nm, 21+1 Torque, 2 Speed, Keyless 3/8" Chase Drill with LED Light, Kit for Home

Getting started and first impressions

I tossed the PULITUO 20V drill into a small tote and spent a weekend tackling the kind of jobs that accumulate in a typical home: swapping cabinet hardware, assembling a bookcase, hanging a couple of shelves, and drilling some pilot holes for anchors. Out of the box, the drill looks and feels like a straightforward homeowner’s kit: two 1.5 Ah batteries, a compact charger, a 3/8-inch keyless chuck, and a pile of bits, an extension bar, a flexible shaft, and wall anchors. The body is compact, reasonably balanced with either battery installed, and the rubber overmold provides a secure grip without feeling gummy.

There’s no mystery here. It’s a 20V-class drill/driver with two mechanical speed ranges (0–400 and 0–1500 RPM) and a 21+1 clutch. The rated torque—266 in-lb (30 N·m)—puts it squarely in the light to mid-duty homeowner category. The LED work light beneath the chuck is bright enough to be useful when you’re reaching into the back of a cabinet or working at dusk.

Power and speed control

The two-speed gearbox gives the tool its personality. On low (0–400 RPM), the PULITUO drill offers solid control for driving tasks. I used this setting for most screws, especially when working in MDF and pine where stripping threads is easy if you go too fast. The variable-speed trigger is smooth and predictable, and the motor starts gently rather than jolting.

On high (0–1500 RPM), it moves into proper drilling territory. It has enough speed to make clean holes in wood with standard twist bits and to spin small metal bits without chatter. It’s not the fastest drill in this class, but the speed range is well chosen for typical DIY tasks.

Chuck, clutch, and driving performance

The single-sleeve 3/8-inch chuck is easy to tighten one-handed and held bits reliably throughout my tests. With small hex-shank driver bits, there was no slippage; with round-shank drill bits, it gripped securely as long as I gave it a firm twist. Runout was within what I consider normal for a budget-friendly homeowner drill—noticeable if you go looking for it on long bits, but not an issue for everyday work.

The 21+1 clutch is a highlight at this price. I tuned it to stop flush when driving #8 screws into pine and turned it up a few notches for pocket-hole screws without snapping or countersinking too aggressively. For bigger fasteners—say, 3-inch construction screws into studs—I used low gear and a higher clutch setting or switched to drill mode. It drove them well as long as I predrilled dense or knotty sections. If your routine involves lag bolts or structural connectors, you’ll want a more powerful tool; for furniture, cabinets, and fixtures, this one lands right in the sweet spot.

Drilling tests: wood, metal, and masonry

• Wood: In pine and poplar, the PULITUO drill made clean holes with both the included twist bits and my own brad-point and spade bits. In oak and maple, it still did the job, though I had to let the tool work at its own pace and step up bit sizes for larger holes. The torque is adequate; just don’t muscle it.
• Metal: Through 1/16-inch sheet steel and light-angle aluminum, it spun 1/8-inch and 3/16-inch bits cleanly with a dab of oil. The motor tone stayed even, and the trigger modulation made it easy to start without skating.
• Masonry: This is not a hammer drill, so expectations should be modest. With a sharp masonry bit and patience, I was able to put anchors into mortar joints and softer brick. It took time, but it was doable for lightweight fixtures. For frequent masonry work or harder substrates, you’ll want a hammer drill.

Battery life and charging

Two 1.5 Ah batteries make a practical difference. I ran a full afternoon of mixed tasks on one pack and swapped to the second while the first recharged. The charger is compact and straightforward, and the recharge time is reasonable enough that I never had to stop a project waiting on a battery. For homeowner use—bursts of drilling and driving—the total runtime feels ample. If you plan long, continuous drilling in dense material, expect to hot-swap between packs as part of your workflow.

Accessories in the kit

The 34-piece kit is a convenience play, and for that it succeeds. The assortment covers most common sizes, the flexible shaft helps in awkward corners, and the extension bar saves your knuckles inside cabinets. The included bits will get you started, but they’re best treated as a stopgap. For hardwoods and metal, I’d invest in a decent set of brad-point wood bits and a HSS or cobalt metal set; they cut cleaner, hold an edge longer, and make the drill feel more capable. The wall anchors are fine for lightweight fixtures, though I default to higher-quality anchors for anything load-bearing.

Ergonomics and lighting

Weight and balance are good with either battery installed. Overhead work didn’t leave my wrist grumbling, and prolonged assembly tasks were comfortable. The forward/reverse selector clicks positively, and the LED light actually illuminates the work area rather than just creating a bright spot under the chuck. It shuts off shortly after releasing the trigger, which helps save the battery without being annoying. Noise and vibration are typical for a tool in this class—no surprises.

Where it falls short

• No hammer mode: The absence of hammer action is the biggest limitation. It will spin a masonry bit, but I wouldn’t choose it for regular brick or concrete work.
• 3/8-inch chuck: You’re limited to 3/8-inch shanks, so larger bits and some specialty accessories won’t fit. For homeowners, this is rarely a dealbreaker; pros will prefer a 1/2-inch chuck.
• Power ceiling: The 30 N·m torque rating is honest about intent. It handles most home tasks well but isn’t built for continuous heavy fastening, large hole saws, or big augers in framing lumber.
• Included bits: Functional for light tasks but not built for aggressive drilling in hardwood or metal. Upgrading bits elevates the whole experience.

Who it’s for

If you’re assembling furniture, hanging shelves and blinds, installing hardware, working on small carpentry projects, or keeping a “house kit” at the ready, the PULITUO 20V drill fits nicely. The two batteries remove the biggest pain point of budget kits—downtime—and the simple control layout makes it friendly for beginners without frustrating more experienced users.

If your projects routinely involve masonry anchors in brick or concrete, large fasteners in framing, or jobsite-level throughput, you’ll outgrow it quickly. At that point, a hammer drill or a higher-torque, 1/2-inch, brushless model starts to make sense.

Practical tips

• Use low gear and the clutch for driving; switch to high gear for drilling clean holes.
• Start with pilot holes in hardwoods and use sharper aftermarket bits for best results.
• For masonry, stick to mortar joints and go slowly, clearing dust frequently.
• Keep both batteries charged—swap as soon as you see performance dip to maintain consistency.

Verdict and recommendation

I came away impressed by how competent this drill is for everyday home use. The combination of two batteries, a useful two-speed gearbox, a wide clutch range, and a compact 3/8-inch chuck makes it easy to reach for and hard to put down during a weekend of projects. Its limitations are predictable and understandable: it’s not a hammer drill, it tops out at homeowner torque levels, and the included bits are more “starter pack” than “long-term kit.”

I recommend the PULITUO 20V drill for homeowners, renters, and anyone building a reliable, budget-friendly toolkit for light to moderate tasks. It’s easy to use, covers the essentials well, and the second battery meaningfully reduces frustration. I wouldn’t recommend it for heavy construction, frequent masonry work, or tradespeople who need a 1/2-inch chuck and more torque; in those scenarios, step up to a hammer-capable, higher-power drill. For the rest of us, this is a practical, well-rounded driver/drill that delivers solid value and gets the job done without fuss.