Cunno 2 Pieces PU Ceiling Medallion Decorative Ceiling Fan Medallion Round Home Lighting for Light Fixtures Chandeliers, 12" od x 3.5" ID

A small upgrade with a big visual payoff

A small, well-chosen ceiling medallion can change how a room feels. I put Cunno’s PU ceiling medallions to work in a couple of spaces—a small kitchen and a hallway—and they delivered exactly the kind of polish I wanted without adding a lot of complexity. They’re sold as a two-pack, which makes them especially appealing if you’re upgrading multiple fixtures or want a backup to experiment with paint.

Design and build quality

Out of the box, these are lightweight polyurethane (PU) medallions finished in white. The pattern leans classic European—ornate but not fussy—and the casting is cleaner than I expected at this price. Detail in the leaves and scrolls reads well from standing height without looking plasticky.

The material is solid PU rather than a thin shell, so there’s enough body to resist warping, but it’s still very light. That matters during install and for renters: you can secure them without heavy mechanical fasteners. The trade-off is typical of PU trims—treat them with care during handling. If you over-tighten screws or press hard near the edges, you can dent or chip the surface. I didn’t have any issues once they were on the ceiling.

There’s no odor, and the faces arrived blemish-free. I did a few test cuts and found the material trims cleanly with a sharp utility knife or a fine-tooth saw if you need to open up the center.

Sizing and fit

Each medallion is 12 inches in outer diameter with a 3.5-inch inner opening. That OD is a sweet spot for small rooms, hallways, and over islands—big enough to frame a fixture but not so large that it overwhelms the ceiling. For large, central chandeliers or dramatic pendants, I’d look for something 14–18 inches to keep proportions right.

The 3.5-inch inner diameter is generous for most pendant and flush-mount canopies. It also does a nice job hiding ragged drywall cuts around electrical boxes. If your fixture uses a wider canopy or a fan canopy with a bulky switch housing, measure first. You can enlarge the opening with a hole saw or carefully score and pare it out, but you’ll lose a bit of the inner ring detail the larger you go.

Installation: adhesive, screws, or both

These are billed as adhesive-install, and that’s a perfectly workable approach. Here’s what I tried and what I recommend:

• Adhesive-only (no holes): I used a small bead of polyurethane construction adhesive on the back, pressed the medallion in place, and taped it lightly until the adhesive cured. After that, I installed the fixture. This keeps the ceiling pristine—useful for rentals—and the bond is strong enough for the medallion’s weight. Important: the medallion never supports the fixture; your junction box remains the structural support.

• Renter-friendly screw-through method: Many fixture canopies mount with two machine screws. Swapping those for slightly longer screws lets you “sandwich” the medallion between the canopy and the ceiling without adhesives or extra holes. It looks tidy and comes off cleanly later. Don’t overtighten—snug is enough to avoid dimples.

• Hybrid for imperfect ceilings: On a ceiling with minor waves, a small ring of adhesive plus the canopy screws provided the best result. I ran a paintable caulk bead around the perimeter after install to hide the seam. Once painted, the transition disappears.

A few practical tips from the install:

• Kill power at the breaker before you start, and support the fixture while you work.
• Dry-fit the medallion and fixture canopy to check coverage and alignment.
• If painting, a quick scuff with a fine sanding pad helps paint grip.
• Mark top and align the pattern with room sightlines for a symmetrical look.

Total time per medallion, working unrushed, was under an hour including touch-up paint.

Finish and paintability

They come in a flat white that’s perfectly serviceable, but paint elevates the look. I tested two approaches:

• Match-the-trim: A coat of the same semi-gloss white I use on crown molding ties the medallion into the room’s millwork. Because the profile has depth, even a monochrome finish reads as detailed.

• Subtle contrast: On one, I used a satin off-white base and dry-brushed a warm metallic into the high points. PU takes both latex and acrylic paints well; just avoid heavy solvent primers.

Brush or rattle-can primer isn’t strictly necessary if you’re using a quality bonding paint, but it helps on high-touch areas. I preferred a brush for control in the crevices.

Day-to-day impression

Once installed, the medallions fade into the architecture—in the best way. They create a finished boundary that makes even simple canopies feel intentional. In the kitchen, they helped visually anchor two small pendants over a compact island. In a narrow hallway with a basic flush mount, the medallion adds a bit of depth so the ceiling doesn’t read as flat.

They’ve stayed tight to the ceiling with no telegraphing seams or shadow lines. Being PU, they won’t crack like plaster with minor seasonal movement. Cleaning is straightforward: a quick dusting or a damp microfiber cloth.

Where they shine

• Small chandeliers, pendants, and semi-flush fixtures where a 12-inch surround feels proportional
• Covering ceiling scars from previous fixtures or oversized box cuts
• Rental situations, using the longer-screw method to avoid adhesives and nail holes
• Projects where you want to paint to match trim or highlight detail

Limitations and gotchas

• Scale for large fixtures: A bold chandelier in a big room deserves a larger OD. These risk looking undersized as a centerpiece.
• Inner diameter constraints: 3.5 inches covers most canopies, but some ceiling fans and oversized canopies need more clearance.
• Handling care: The PU surface is durable once installed but can nick if you’re rough during install. Use a soft surface on the bench and go easy on hardware torque.
• Ceiling irregularities: On wavy ceilings, expect to use a bit of paintable caulk for a seamless edge.

Alternatives and positioning

Compared with heavy plaster medallions, these are much easier to install and won’t stress old plaster ceilings or lath. Versus the very thin polystyrene styles, Cunno’s PU feels more substantial and holds detail better when painted. You can find more elaborate or larger medallions, but for a modest, classic design and an easy two-pack format, these hit a practical sweet spot.

Value

Getting two in the box stretches a budget upgrade across multiple rooms. The combination of crisp detail, forgiving install, and paint-ready surface makes them cost-effective, especially if you’re refreshing fixtures as part of a broader update. I also appreciate that they don’t force you into one installation method—adhesive-only, screw-through, or hybrid all work.

Safety note

It bears repeating: a medallion is decorative. Do not rely on it to support any fixture. Make sure your electrical box is properly rated and secured for the weight of your light or fan, and turn off power before you start.

Recommendation

I recommend the Cunno PU ceiling medallions for anyone looking to add a bit of architectural finish around small to medium fixtures without taking on a complex install. They’re lightweight, easy to secure, convincingly detailed once painted, and the 12-inch size is versatile for most secondary spaces. If you’re dressing a large statement chandelier or need an unusually wide inner opening, choose a larger or purpose-built medallion. For everything else—pendants, flush mounts, small chandeliers—this two-pack is a smart, budget-friendly upgrade that looks more expensive than it is and installs with minimal fuss.