Features
- Integrated power and USB outlets in the under-lid area
- Double-wall steel construction reinforced with internal corner gussets
- POSI-LATCH® drawer latching system for drawer release
- Full-extension ball-bearing drawer slides
- Drawer slides rated for 200 lb load capacity
- Under-lid area with open front and gas struts
- Lid stiffener for added stability
- Heavy-duty keyed internal locking system
- Includes seven drawer liners and one top mat
- Approximately 12,098 cubic inches of storage
Specifications
| Color | Black |
| Nominal Width | 41 in |
| Depth | 21 in |
| Height | 24.5 in |
| Product Weight (Oz) | 3184 |
| Number Of Drawers | 7 |
| Storage Volume | 12,098 cubic in |
| Drawer Load Capacity | 200 lbs |
| Material | 18-20 gauge double-wall steel |
| Drawer Slides | Full-extension ball-bearing |
| Drawer Latching System | POSI-LATCH® |
| Locking | Heavy-duty keyed internal locking system |
| Under Lid Features | Open front, gas struts, integrated power and USB, top mat |
| Includes | 7 drawer liners, 1 top mat |
| Warranty | Lifetime Limited Warranty |
Related Tools
Related Articles
A 41-inch wide, seven-drawer metal tool chest constructed from double-wall steel. Drawers use full-extension ball-bearing slides and a latch system for secure closure. The lid is supported by gas struts and contains integrated power and USB outlets in an open-front under-lid area. The unit includes drawer liners and a top mat and has an internal keyed locking system.
Project Ideas
Business
Mobile Device & Small Electronics Repair
Use the chest as a lockable pop-up repair bench for phones, tablets, and laptops at markets and office parks. The integrated power/USB runs your soldering station, microscope, and chargers; drawers hold parts and tools in categorized bins. The POSI-LATCH prevents accidental opening in transit, and the keyed lock secures customer devices after intake.
On-Site Bike Tune-Up Service
Outfit the chest with bike-specific tools, lubes, and spares. Add a detachable repair-stand mount to a rolling base and use the powered lid area for a work light and device charging. Offer scheduled building/office visits for quick tunes and flat fixes. Brand the chest and add a mobile POS in a top drawer for easy payment.
Knife/Tool Sharpening Pop-Up
Set up a sharpening booth with water stones, guides, leather strops, and a compact belt sharpener plugged into the integrated power. Use lined drawers for grit progression and customer order tracking. The heavy-duty construction and 200 lb slides support machines and jigs, and the lock keeps incoming jobs secure.
Custom Tool Chest Outfitting
Sell bespoke drawer organizers, shadow-foam kits, label sets, and power/cable management add-ons tailored to this exact 41-inch, 7-drawer model. Offer local installation or ship precut kits. Monetize with tiered packages (mechanic, electrician, hobbyist) and upsell branded top mats and USB lighting.
Contractor Battery Charging Station Rental
Build a multi-brand battery charging hub inside the chest and rent it to job sites. Preload with surge protection, labeled chargers, and inventory tracking. The double-wall steel, latching drawers, and keyed lock make it durable and secure, while integrated power simplifies setup—just plug in and start charging across crews.
Creative
Cordless Tool Charging Hub
Convert the under-lid bay into a multi-platform battery charging center using the integrated AC and USB outlets. Mount chargers to a backer panel, add cable clips/Velcro ties for tidy runs, and dedicate drawers (with liners) to each brand’s batteries, bits, and accessories. Add a small power meter and surge protection. The 200 lb-rated slides handle chargers and packs easily, while the keyed lock secures everything after work.
Electronics Prototyping Chest
Build a compact electronics bench inside the chest: ESD mat in the under-lid area, USB-powered lighting, and a clamp-on fume extractor that plugs into the integrated outlets. Store a soldering station, hot air tool, and handheld scope in the top drawers with 3D-printed bins for components and jumpers. Label each drawer and use the POSI-LATCH to keep drawers closed during moves to makerspaces or client sites.
RC/Drone Field Box
Turn the chest into a field-service station for RC cars, planes, and drones. Create foam-cut organizers for props, motors, ESCs, and tools; dedicate a drawer to adhesives and heat-shrink. Use the powered lid area for balance chargers and a tablet for tuning/config apps. Optionally add a ventilated LiFePO4 battery drawer with proper fusing for off-grid charging on race days.
Metal/Wood Finishing Station
Set up the under-lid area as a compact finishing bay with a silicone top mat, heat gun, and small rotary tool plugged into the integrated outlets. Use deep drawers for abrasives sorted by grit, finishes, rags, and PPE. Create DIY drawer dividers from plywood or 3D-printed trays so you can quickly swap between wood and metal finishing kits.
Shadow-Foam Organizer Build
Design and cut custom shadow-foam inserts for all seven drawers. Color-code by tool category, route finger pulls, and add label strips. Use the stiff lid area to mount a measuring/marking board for laying out silhouettes. This project transforms the chest into a visually intuitive, time-saving system with a pro look.