Features
- Tool-free SpinLOCK universal arbor for quick diameter changes
- Includes pilot bit for starting holes
- Progressor tooth design for improved cutting performance and durability
- Hole saws made with 8% cobalt alloy for increased strength
- Reinforced shoulders for added durability
- Plastic case for storage and protection
Specifications
| Part Number | HBSLKIT |
| Contents | Hole saws: (1) 1 in; (1) 1-1/2 in; (1) 2-1/8 in; (1) 2-1/2 in; (1) AN01 small adapter; (1) SpinLOCK adapter; (1) HB85PB pilot bit |
| Hole Saw Diameters | 1 in; 1-1/2 in; 2-1/8 in; 2-1/2 in |
| Working Length | 1.75 in |
| Pack Quantity | 7 |
| Weight | 1.53 lb |
| Upc | 000346646764 |
| Material | 8% cobalt alloy (hole saws) |
| Tooth Design | Progressor (alternating tooth sizes) |
| Included Accessories | AN01 small adapter, SpinLOCK adapter, HB85PB pilot bit, plastic case |
| Intended Materials | Wood, metal, plastic |
Related Tools
Related Articles
Seven-piece hole saw kit that includes a SpinLOCK tool-free universal arbor, pilot bit, adapters, and four hole saws with a Progressor tooth pattern. The saws are made with an 8% cobalt alloy and have reinforced shoulders. The kit is supplied in a plastic case and is intended for cutting in wood, metal, and plastic.
Model Number: HBSLKIT
Project Ideas
Business
Door knob and latch bore service
Offer on-site retrofit/repair of door hardware: bore 2-1/8 in knob holes and 1 in edge latch holes with clean, centered cuts. SpinLOCK lets you change sizes quickly between bore and latch operations, and the progressor teeth reduce tear-out on wood and laminate. Upsell alignment jigs, strike mortising, and hardware install.
Desk and countertop cable grommet installs
Install 2-1/8 in or 2-1/2 in cable grommets in office desks, home studios, and reception counters. The universal arbor and pilot bit make fast, accurate holes in melamine, veneer plywood, plastic, and thin metal. Package pricing per hole with dust control and edge sealing for a tidy, pro finish.
Cabinet puck light retrofits
Provide under-cabinet and shelf lighting upgrades by drilling precise 2-1/8 in or 2-1/2 in recesses for LED puck lights. The reinforced shoulders and cobalt teeth handle hardwood face frames and melamine carcasses cleanly. Bundle design, hole cutting, wiring coordination, and dimmer setup for a turnkey service.
PVC herb tower kits for gardeners
Produce and sell pre-drilled PVC towers with 2-1/8 in or 2-1/2 in planting pockets, caps, and a simple irrigation insert. SpinLOCK speed lets you batch dozens efficiently with consistent spacing using the pilot bit. Offer DIY kits, assembled towers, and upsells like trellis rings and plant starts.
Event and retail luminary production
Create wholesale batches of upcycled can or thin-sheet metal lanterns with clean 1 in and 1-1/2 in cuts, plus wooden bases bored to 2-1/2 in for candles. The cobalt alloy saws resist heat and dulling in light-gauge metals, enabling consistent runs. Market to wedding planners, restaurants, and gift boutiques with custom patterns and finishes.
Creative
Vertical herb tower planter
Use 2-1/8 in or 2-1/2 in hole saws to cut staggered planting pockets along a 4 in PVC pipe for a compact herb tower. The reinforced shoulders and cobalt teeth handle PVC cleanly, and the pilot bit keeps spacing accurate. Heat and flare the cutouts (optional) to form cup lips, then add soil and herbs; cap and add a drip line for irrigation.
Tealight and candle block set
Drill partial-depth 1-1/2 in recesses into hardwood offcuts to make sleek candle holders; use the 1 in saw for slimmer tealights. The 1.75 in working length allows deep, straight pockets, and you can swap sizes with SpinLOCK to create mixed arrangements. Sand, oil, and add felt pads for a giftable set.
Inlaid mid-century wall clock
Cut contrasting wood plugs using the 1 in and 1-1/2 in saws to create dot markers around a plywood or hardwood clock face. Glue the plugs into shallow pockets for a flush inlay look, hiding the pilot hole with a tiny dowel or epoxy. Add a clock movement and minimalist hands for a boutique-style piece.
Wildlife birdhouse and feeder duo
Make a birdhouse with a 1-1/2 in entry for chickadees and wrens, and a matching feeder using 2-1/8 in and 2-1/2 in fill/view ports covered with acrylic. The pilot bit ensures centered, splinter-free openings in cedar, while reinforced shoulders resist binding. Finish with exterior-safe screws and paint or oil.
Upcycled tin can luminaries
Punch crisp geometric patterns in clean tin cans using 1 in and 1-1/2 in saws; the 8% cobalt alloy blades handle thin steel without tearing. Add a wood base (cut with a 2-1/2 in pocket for a tea light) for stability. Spray-paint in metallics and string several for an ambient patio set.