DeWalt Vibration Reducing Premium Padded Glove

Why I reached for these gloves

Long sessions with an orbital sander or a string trimmer can leave my hands buzzing long after the tool is back on the shelf. I wanted a pair of gloves that cut down vibration without turning my hands into clumsy paddles. The DeWalt padded gloves hit that sweet spot on paper: leather palm for grip, memory-foam padding where it matters, and a pre-curved fit that promises dexterity. I wore them across several weekends with a 5-inch random-orbit sander, a corded belt sander, a compact router, a 4.5-inch angle grinder, and a gas string trimmer, plus some time on a die grinder. They’re not a cure-all for hand-arm vibration, but they made a noticeable difference—enough that I kept reaching for them.

Design and build

The design is clearly purpose-built for power tool work:

• Leather palm: The ToughTanned leather is water- and oil-resistant and offers grippy, predictable contact on plastic and metal handles, even when a little wet or dusty.
• Targeted padding: High-density memory foam is placed in the palm and thenar/hypothenar regions rather than slabbed across the whole glove. That helps absorb vibration without creating a mushy interface.
• Reinforcements: Nylon fourchettes (the finger side panels) and a saddle overlay around high-wear zones prevent seam blowouts between the thumb and index finger—where many gloves fail first.
• Protection touches: A foam-padded knuckle area fends off the routine knocks without being a bulky hard shell.
• Closure and debris control: The extended TPR UlnaLock wrist closure wraps further around the ulnar side than a typical strap. It anchors the glove securely and helps keep grit out, aided by a stretch nylon gusset.
• Usability: A terry-cloth thumb patch is great for sweat. The pre-curved cut means the glove naturally sits in a “tool-ready” posture.

The branding says DeWalt, with Radians listed as the manufacturer—common for DeWalt’s PPE line. Construction quality is solid: even stitching, aligned padding, and no glue squeeze-out. The gloves are listed as machine-washable; I ran them on a gentle cycle and air-dried them flat. The leather didn’t stiffen, and the hook-and-loop stayed grippy.

Fit and comfort

Fit can make or break padded gloves. I typically wear a Large in mechanics-style gloves and found these run true to size but slightly snug out of the bag because of the padding. After an hour of use, the leather relaxed without stretching out. If you’re between sizes or prefer a looser feel, size up.

The pre-curved fingers reduce palm bunching when you grip a tool handle. The UlnaLock closure is more than marketing—it wraps deeper and holds the glove from creeping during high-vibration work. The back-of-hand fabric breathes better than leather, but this isn’t a high-vent glove; on hot, humid days I felt some heat buildup at the wrist and knuckles. The terry thumb got more use than I expected—nice touch.

Vibration reduction in the real world

No glove completely eliminates vibration, and these aren’t marketed with a formal anti-vibration certification (e.g., ISO 10819). Still, the targeted foam does meaningful work.

• Random-orbit sander (5"): This is where the gloves shine. The high-frequency buzz in the palm and heel of my hand dropped enough that the post-sanding “tingles” were significantly reduced. Grip felt more relaxed because the foam allowed a looser hold without losing control.
• Belt sander: The larger, lower-frequency vibrations were damped but not erased. The padding took the edge off the harshness, especially when I had to push down. After 30 minutes, I had less numbness than bare-handed.
• Angle grinder (4.5", grinding disc and flap wheel): With the grinder, I could still feel the amplitude of the tool’s oscillations, but the sharpness was blunted. The padding behind the metacarpals helped when indexing the tool.
• Compact router: Pleasant surprise. The gloves reduced the prickly buzz in the palm and allowed steadier control on longer passes without over-gripping the handles.
• String trimmer/brushcutter: The foam buffered the steady hum that usually migrates into my forearms. After 45 minutes, my hands felt fresher, and I didn’t have the usual post-job shaking.

The memory foam is strategically placed, which mostly helps. The only caveat: if your tool handle happens to sit on the unpadded seam between zones, you can create a small pressure ridge. Rotating your grip slightly fixes it.

Dexterity and control

Bulk is the tradeoff with padded gloves. Here, the balance is good. Trigger pulls, paddle switches, and speed dials were easy to manage. I could pinch and place small hardware, but tactile feedback is muted compared to a thin mechanics glove. If you’re doing delicate layout work or handling tiny fasteners all day, you’ll want a second pair on hand. For tool operation, sanding blocks, and general shop tasks, these offer enough feel to be confident.

The leather palm stays tacky when slightly wet or dusty. Oil resistance helps keep grip consistent on tools like die grinders and impact drivers. The glove’s pre-curved shape—combined with the leather’s traction—reduces the tendency to over-squeeze to compensate for padding.

Durability and maintenance

Across a month of mixed shop and yard use, wear was limited to light scuffing on the palm and saddle. Stitching at the thumb web (a common failure point) stayed intact, likely thanks to the nylon reinforcement overlay. The knuckle padding will fend off incidental knocks but won’t replace real impact protection.

Machine-wash on gentle, air-dry flat. As with any leather palm, avoid high heat. After washing, a small amount of leather conditioner on the palm brought back suppleness without making it slick. The hook-and-loop wrist remained strong; keep lint out to prolong life.

Safety notes and limitations

• Not certified anti-vibration: I couldn’t find an ISO 10819 certification. For heavy demolition hammers or extended pneumatic tool use where you need documented vibration attenuation, look to a certified glove.
• Not a cut glove: There’s no stated ANSI cut rating. Don’t treat these as cut-resistant; if you’re working with sheet metal or blades, wear dedicated cut protection.
• Heat/chemicals: Leather and foam won’t handle high heat, solvents, or caustics. Keep them out of spark showers and chemical exposure.
• Touchscreen: In my use, touchscreens were hit-or-miss. Expect to pull a glove off for phone or tablet use.
• Warranty: The listing notes no limited warranty. Inspect on arrival and during use; treat them as a consumable PPE item.

Who they’re for

These make sense if you:

• Spend long stretches with sanders, routers, grinders, finishers, or a string trimmer.
• Want real vibration relief without sacrificing control.
• Prefer a leather palm for grip and durability.
• Value a snug, secure wrist closure that keeps debris out.

They’re less ideal if you need certified anti-vibration performance, maximum breathability for hot climates, or fine fingertip sensitivity for precision assembly.

Sizing tips

Available in Medium through 2XL. They run true to size with a slightly snug feel at first. If you’re between sizes, go up. The pre-curved fingers mean minimal break-in, and the leather relaxes with use. The extended wrist strap is generous; if you wear a watch, you may want to adjust or remove it for comfort.

The bottom line

The DeWalt padded gloves strike a smart balance: meaningful vibration reduction, good grip, and enough dexterity to keep tool control precise. The targeted memory foam dampens the buzz of sanders and trimmers especially well, and the leather palm plus reinforced seams suggest a solid service life if you treat them reasonably. They’re not a certified anti-vibration glove, and they won’t replace specialized PPE for heavy-impact or high-heat work, but for day-in, day-out power tool sessions, they made my hands less fatigued and my work more consistent.

Recommendation: I recommend these gloves for anyone who spends extended time on sanders, routers, grinders, or string trimmers and wants to reduce hand fatigue without giving up control. They’re comfortable, thoughtfully built, and practical. Just go in knowing they’re not cut-rated or formally vibration-certified, and plan to pair them with task-specific gloves when your work demands it.