Features
- Torsion zone with tapered design to absorb torque peaks from impact drivers
- Heat-treated construction and hardened surface for improved durability
- Precision-milled Phillips P1 tip for better fit and reduced cam-out
- 1/4-inch hex impact-rated shank
- Magnetic tip to help hold screws
- Laser-etched markings for durable identification
Specifications
| Part Number | ITDPH1202 |
| Pack Quantity | 2 |
| Length | 2 in |
| Point | Phillips P1 |
| Shank | 1/4 in hex |
| Weight | 0.04 lb |
| Upc | 000346656527 |
| Manufacturer Stated Durability | Up to 50× life versus standard bits (manufacturer claim) |
| Regulatory | Prop 65 warning: contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm |
Related Tools
Related Articles
Two 2-inch driven impact screwdriver bits with a Phillips P1 tip. Intended for use with 1/4-inch hex impact drivers, they include a torsion zone to absorb torque peaks, heat-treated construction, and a precision-milled tip to improve fit and reduce cam-out. Magnetic tips help retain screws and laser-etched markings provide durable identification.
Project Ideas
Business
Mobile Cabinet Hardware Install & Tune-Up
Offer a flat-rate service to install knobs/pulls, adjust soft-close hinges, tighten face-frame screws, and swap stripped brass with stainless in kitchens and baths. The P1 impact bits excel on small hinge and strike plate screws, reducing cam-out and damage to finished hardware. Market to new homeowners, realtors, and kitchen remodelers for quick, clean turnaround.
Rental Turnover Fastener Tightening Service
Provide a rapid checklist service for landlords and Airbnb hosts: tighten outlet/switch plates, towel bars, door strikes, cabinet pulls, vent covers, and closet hardware—all commonly using P1 screws. The magnetic tip speeds one-handed starts while holding covers in place, and impact-rated durability keeps productivity high across many units.
Gallery and Picture Hanging Installations
Specialize in installing art rails, cleats, and small frame hardware with neat, repeatable screw seating. The 2-inch bit reaches into frame rabbets and narrow cleats, while the precision-milled P1 minimizes marring on decorative brass heads. Package services for interior designers, staging companies, and galleries with per-wall or per-piece pricing.
RV/Boat Interior Rattle-Fix and Trim Service
Market a mobile service to secure loose trim, hinges, latches, and access panels in RVs and boats—areas that rely on lots of small P1 fasteners. The torsion zone prevents overdriving into thin veneers, and the magnetic tip helps in awkward, overhead, or confined spots. Offer seasonal ‘rattle-proofing’ packages.
Small-Batch Assembly for Makers
Partner with Etsy/Shopify makers to assemble products that use many small screws—jewelry displays, keepsake boxes, pedalboards, craft tool caddies. The impact-rated P1 bits improve throughput and consistency, reducing rejects from stripped heads. Bill per piece or per run, and offer QC reports with torque targets and sample photos.
Creative
Brass Screw Mosaic Wall Art
Create a geometric or gradient mosaic on a stained hardwood panel using small brass P1 screws as the ‘pixels.’ Pre-mark a grid, pre-drill shallow pilots, and drive hundreds of screws to precise depths to catch light at different angles. The precision-milled P1 tip minimizes cam-out on soft brass, while the torsion zone prevents snapping or overdriving. The magnetic tip speeds pick-and-place, and the 2-inch length helps reach into a frame or shadowed recess without a stubby adapter.
Shadow Box With Floating Acrylic Shelves
Build a display shadow box and mount thin acrylic shelves using low-profile P1 countersunk screws and standoffs. Pre-drill acrylic and wood, then use the impact-rated bit for smooth, controlled seating without chatter. The magnetic tip holds tiny screws while you position shelves one-handed, and the torsion zone absorbs torque peaks to reduce cracking or stripping in small fasteners.
Fold-Flat Artist Organizer With Piano Hinges
Craft a compact, fold-flat wooden organizer for brushes, pens, or craft knives. Attach narrow piano hinges and small latches with P1 screws along thin stock. The precise P1 fit prevents chewing up delicate hinge screws; the 2-inch bit reaches past the hinge leaf into recesses, and the torsion zone helps avoid overdriving into thin material.
Adjustable Rail for Picture Frames and Keys
Make a slim wall-mounted rail with a line of P1 screws set into elongated slots. Screw heads act as adjustable anchor points for picture wire, key rings, or small hooks. The magnetic tip lets you start screws in tight slots without losing them, while the hardened bit resists wear if you’re adjusting positions frequently.
Mechanical Puzzle Box With Captive Screws
Design a wooden puzzle box where panels slide only after specific P1 screws are loosened in a sequence. Use brass or black-oxide P1 screws as both functional fasteners and visual clues. The precision tip reduces damage to decorative heads, and the torsion zone helps maintain repeatable torque so mechanisms remain smooth.