Copper Creek Passage Interior Door Knob – ANSI Grade-3 Certified, Modern Heavy Duty Handle, Easy Install and Reversible for Bedroom, Bathroom & Closets – Satin Stainless

A good passage knob should disappear in daily use; the Copper Creek passage knob does exactly that. I put one on a frequently used hallway door and another on a closet, and after several weeks of opening, closing, and the occasional shoulder bump, it’s become one of those quiet upgrades that keeps doing its job without drawing attention—mostly in good ways.

What it is and who it’s for

This is a standard, non-locking interior knob—ideal for hallways, closets, utility rooms, and any bedroom or office where you don’t need a privacy lock. It’s an ANSI Grade 3 unit, which is the typical residential rating for interior hardware. If you’re outfitting a high‑traffic home or rental and don’t want to fuss with keys or buttons, this is a straightforward, all‑metal option with a clean satin stainless finish.

If you need a locking function for bathrooms or bedrooms, Copper Creek sells compatible privacy versions, but this specific model is passage only.

Installation: five minutes if you prep right

Door hardware installation can be painless if you follow a couple of basics:

• Check door thickness. It’s designed for 1-3/8 to 1-3/4 inches, which covers most interiors.
• Confirm your backset. The latch is adjustable for both 2-3/8 and 2-3/4 inches. There’s a small tab/arrow on the latch—pull to extend for the longer backset. It’s easy to miss if you’ve never seen this design; don’t twist, just pull and it clicks into place.
• Mind the latch bevel. The angled side should meet the strike on the jamb, or you’ll get a clunky close.

With those dialed in, I needed only a #2 Phillips screwdriver. The latch dropped into the 1-inch bore cleanly, and the faceplate sat flush in an existing mortise. The through-bolts aligned on the first try for one door; on a second door I had to wiggle the exterior knob to catch the threads. If your door’s bore is a hair off-center, start both screws by hand before tightening. A magnetized screwdriver helps when the angle is awkward.

From first screw to final test, the first install took under 10 minutes; the second, about 15 because I adjusted the strike to quiet the close.

Build and feel

The knob has a reassuring weight without being heavy, and the all‑metal chassis translates to a tight, rattle‑free feel once installed. The action on both of my units is mostly smooth with a firm return from the spring. On one door I noticed a faint “hitch” at a specific point in rotation right out of the box; it went away after re-centering the latch and snugging the mounting plate evenly. If you feel any unevenness, check that the latch is centered in the strike opening and that the two long screws are tightened evenly—over‑torquing one side can introduce friction.

The latch tongue engages positively. There’s a small click on closure that’s typical of metal strikes; if that bothers you at night, a tiny shift of the strike plate toward the latch (we’re talking a millimeter) and a dab of dry silicone on the latch face softens the sound.

Finish and design

Satin stainless is the right call for most modern and transitional interiors. It has a brushed, silver tone that resists fingerprints better than polished finishes and doesn’t show micro‑scratches easily. It also tends to look cleaner longer in busy areas. Note that “satin stainless” is cooler in tone than many “brushed nickel” fixtures—if you’re mixing metals in the same sightline, check it against nearby hinges or faucets before you commit to a house‑wide swap.

The profile is classic ball knob, which looks tidy and compact on narrow stiles. If you have users in the home with limited grip strength or arthritis, a lever handle is more ergonomic; knobs generally aren’t the best choice for accessibility.

Fit and compatibility

The knob is reversible for left- or right‑handed doors, and it fits standard 2-1/8‑inch cross bores and 1‑inch latch bores. The included strike is a typical rounded-corner plate. If your jamb is mortised for square‑corner strikes, you can either chisel the corners or reuse your existing strike if it mates well with the new latch. I used the included strikes and had clean alignment on both doors.

Backset adjustment is tool‑free, and the latch faceplate is removable if you need to swap styles (though Copper Creek ships it ready for the common rounded-corner mortise). The included screws are appropriately sized and didn’t strip under normal torque.

Day-to-day use

The passage function just works. The return spring is snappy enough that the latch fully resets even when someone half‑turns the knob and lets go. Over a few weeks, I haven’t needed to re‑tighten anything; there’s no wiggle between the knob and the rosette, and the spindle hasn’t loosened. The finish still looks new despite being the “grab it with grocery hands” door in my house.

Noise is reasonably low. After adjusting the strike on one frame, the close is a muted thud with a soft metallic tick—what I expect from a well‑fit set.

Small quirks and tips

• Start the through‑bolts by hand. The first turns are the hardest because you’re aiming across a cavity; once both are caught, the rest goes quickly.
• Keep the latch centered. If turning feels uneven, loosen the two long screws slightly, nudge the assembly, then re‑tighten evenly.
• Don’t forget the backset. The adjustable latch pulls to extend—easy to miss if you’re used to fixed latches.
• Check the strike alignment. Aim for a hair of clearance; if the latch drags on the strike lip, you’ll feel it in the turn.

Value

For a basic, all‑metal passage knob, the Copper Creek is priced right. You’re getting a durable chassis, adjustable latch, and a finish that holds up to fingerprints and daily use. It’s not pretending to be commercial Grade 1 hardware, but for interior residential doors it lands squarely in the “install it and forget it” category.

Alternatives

• If you need a privacy lock for bathrooms or bedrooms, consider the matching privacy version so finishes and profiles stay consistent throughout the house.
• For better accessibility or a more modern look, a lever handle in the same finish will be easier on hands and can reduce the torque needed to latch.
• If you’re matching warm-toned metals (brass, bronze), choose a different finish to avoid clash.

The bottom line

The Copper Creek passage knob delivers exactly what I want from interior hardware: simple installation, a solid all‑metal feel, and a finish that looks good without demanding attention. Aside from minor screw‑alignment fussing on one door and a small adjustment to quiet the close, there’s nothing here to trip up a moderately handy homeowner. It’s a practical, durable choice for closets, hallways, and any room where you don’t need a lock.

Recommendation: I recommend this knob for most residential interior doors that don’t require privacy. It installs quickly with basic tools, feels sturdier than many budget options, and the satin stainless finish integrates well in modern spaces. If you need enhanced accessibility or a locking function, pick the corresponding lever or privacy variant; otherwise, this passage knob is an easy, reliable upgrade at a sensible price.