Delaney Callan Hardware Brayden Passage Door Knob, Fits Doors 1-3/8 to 1-3/4 in. Thick, Satin Nickel – Reversible Left/Right-Handed Hallway, Closet Door Knob with Latch – Easy to Install

Why I reached for the Brayden passage knob

I had a hallway door with a tired, squeaky knob and no reason to lock it. A simple, durable passage set with a neutral finish was all I needed. The Brayden passage knob checked the right boxes: satin nickel to match existing hinges and fixtures, a reversible setup so I didn’t have to think about door swing, and a straightforward installation that only called for a Phillips screwdriver. Nothing fancy—just the right mix of utility and clean styling for high-traffic interior doors.

Installation: five unhurried minutes

Swapping out the old knob for the Brayden was as simple as door hardware gets. Everything I needed came in the box: the two knobs, the latch mechanism, the strike plate, screws, and a brief instruction sheet. I used just a Phillips screwdriver; no drilling, no special templates.

Here’s how it played out:
- I removed the two faceplate screws on the old knob, popped out the latch, and kept the existing hinge and door prep as-is.
- The new latch slid into the existing 1-inch edge mortise without fuss. The faceplate sat flush; I only did a quick pass with a utility knife to clean a paint ridge from the old set.
- Aligning the two knob halves through the door bore was painless. The spindle engaged immediately, and the screws bit cleanly without cross-threading.
- The strike plate matched my old mortise well enough that I didn’t need to chisel or shim. The latch found the strike with a gentle push on the door.

From start to finish, it took me about five minutes working at a casual pace. If you’ve never installed a knob, plan on ten; the process is still approachable. The reversible design means you can put it on left- or right-hand doors without reconfiguring parts.

Fit, compatibility, and what to check

The Brayden is designed for interior doors between 1-3/8 and 1-3/4 inches thick, which covers the common hollow-core doors in many homes and most solid-core interiors as well. The set lined up with the standard bore in my door. As with any hardware swap, I recommend checking:

• Door thickness: confirm it falls within the 1-3/8 to 1-3/4 inch range.
• Existing prep: you’ll want a standard 2-1/8 inch bore and a 1-inch edge hole for the latch.
• Strike alignment: if your old latch didn’t meet the strike cleanly, this won’t magically fix it. Expect to adjust the strike or door if the alignment was previously off.

The latch is intended for typical interior door setups. In my case, it dropped in and matched the old footprint closely enough that I didn’t need to enlarge or fill any mortises.

Day-to-day use: quiet, predictable, and unobtrusive

A passage knob’s job is to be almost invisible in daily life—always ready, never fussy. The Brayden does that well. The latch action is smooth and quiet. The return spring feels positive without being stiff, and the knob doesn’t wobble or rattle under normal use. On a hallway door that sees dozens of cycles a day, the quiet click is welcome.

On grip and ergonomics, the rounded profile is comfortable. If you prefer levers for accessibility reasons, this won’t substitute, but for a straightforward knob, it’s easy to grasp and turn, even with a handful of laundry. The rosette covers any minor paint scuffs around the bore, leaving a clean look.

Because this is a passage set, there’s no locking mechanism. That’s the right choice for hallways and closets. If you want the same look with privacy functionality for bedrooms or bathrooms, make sure you choose the corresponding privacy version from the same series rather than this passage model.

Finish and design notes

The satin nickel finish is consistent and leans toward a soft, brushed tone rather than a mirror shine. It blends effortlessly with brushed-nickel hinges, cabinet pulls, and most contemporary lighting trims. Fit-and-finish details are tidy: no sharp edges, even plating, and screws that match the overall tone.

After installing, I wiped the knob with a microfiber cloth to remove fingerprints from handling. It’s held up well to daily touches without showing smudges or streaks. Satin nickel is a pragmatic choice if you’re trying to unify a space without drawing extra attention to the hardware.

Durability and build

This isn’t a heavy, commercial-grade piece, but it doesn’t feel flimsy either. The latch faceplate sat square in the mortise and the mechanism engages reliably. The knob’s internal play is minimal—just enough to avoid binding but not enough to feel loose. If you’re outfitting a busy hallway or closet door, I’d expect it to stand up to normal household use without drama.

If you’re installing in a garage entry or an exterior door, this isn’t the right product; it’s not designed for locking, keyed access, or weather exposure. For those applications, step up to an exterior-rated set.

Small quibbles and tips

No major complaints, but a few practical notes from the install:

• The screws go in cleanly, but start them by hand before driving to avoid cross-threading.
• If your door or strike has shifted over time, expect to spend a minute aligning the latch bevel toward the strike plate so the door closes without needing a hard push.
• Label and bag your old hardware in case you’re upgrading multiple doors and want to compare footprint compatibility before committing to a whole-house swap.

It would be nice if the packaging included a simple alignment shim or template for first-time installers, but truthfully, you won’t miss it on a standard replacement.

Value and where it fits

The Brayden passage knob lands in that sweet spot of “install it and forget about it.” It’s ideal for:

• Hallways, closets, laundry rooms, and pantries where locking isn’t needed
• Quick upgrades to unify finish across a floor or whole home
• Rental turnovers where reliable, easy-to-install hardware saves time

If you’re trying to match a very specific designer profile or need premium heft, you’ll find pricier options. For most homes, this set provides the right balance of reliability, neutral style, and minimal installation friction.

Final thoughts

As a simple hallway solution, the Brayden passage knob does exactly what it should: installs fast, looks clean, and works quietly. The satin nickel finish integrates well with common fixtures, the reversible design eliminates guesswork during installation, and the everyday feel is solid. No frills, no unexpected surprises—just a dependable passage set that doesn’t call attention to itself.

Recommendation: I recommend the Brayden passage knob for anyone replacing or standardizing non-locking interior door hardware. It’s quick to install with a single screwdriver, compatible with common door thicknesses, and provides a low-profile, durable finish that holds up in daily use. If you need a lock, choose the privacy or keyed version from the same line; otherwise, this passage model is an easy yes for hallways and closets.