Features
- High-carbon steel cutting edge for wood
- StarlockMax three-dimensional mounting system for higher torque transfer
- Curved Tec blade design for improved control and smoother plunge cuts
- Color-coded interface and laser-etched markings for quick identification
- Quick blade change compatible with StarlockMax (reported within ~3 seconds)
- Swiss-made manufacturing
Specifications
Application | Wood |
Material | High-carbon steel (HCS) |
Blade Size | 1.25 in (1-1/4") |
Blade Length | 4 (as listed) |
Blade Thickness | 0.125 in |
Immersion Depth | 1.5 in |
Mount / Interface | StarlockMax |
Pack Quantity | 1 |
Country Of Manufacture | Switzerland |
Related Tools
Related Articles
Plunge-cut blade made from high-carbon steel for general-purpose wood cutting. Uses the StarlockMax interface for a three-dimensional connection between blade and tool to increase torque transfer and reduce vibration. Curved blade profile for controlled, smooth plunge cuts. Manufactured in Switzerland.
Model Number: OSM114
Project Ideas
Business
On-Site Cabinet Retrofit Service
Offer mobile upgrades: soft-close hardware, magnetic latches, and wire pass-throughs. Use controlled plunge cuts to mortise hinges and create clean cable channels in existing cabinetry without removing boxes.
Custom Slotted Phone & Tablet Stands
Produce minimalist stands from hardwood offcuts. The blade makes repeatable plunge slots at consistent depths for device rests and cable paths—ideal for small-batch Etsy sales or craft fairs.
Floor Vent and Register Cut-ins
Partner with flooring contractors to add or resize wood floor vents and return cutouts. Plunge directly into hardwood for precise openings near walls and corners where other tools struggle.
Inlay Signage and Marquetry Shop
Sell custom wooden signs with inset letters or logos. Plunge out crisp pockets for contrasting wood or resin inlays; the smooth, low-vibration cut helps preserve clean pocket edges for tight fits.
Baseboard Cable Concealment
Provide smart-home cable routing by plunging discreet channels behind or within wood baseboards and trim. Fast, controlled cuts minimize wall damage and speed up installs in finished spaces.
Creative
Secret Compartment Picture Frame
Build a deep wooden frame with a hidden stash area behind the mat. Use the 1.25 in blade to plunge precise access slots and mortises for rare-earth magnets. The curved profile gives clean, controlled starts so the reveal line stays crisp.
Inlaid Resin River Coasters
Cut organic, meandering channels into hardwood blanks via controlled plunge cuts, fill with tinted epoxy, then sand and finish. The 1.5 in immersion depth is plenty for bold color lines without compromising coaster strength.
Slotted Wooden Lantern
Create a lantern with patterned light by plunging evenly spaced slots into thin wood panels. The smooth plunge action reduces tear-out on delicate species; assemble panels around an LED candle for striking shadows.
Layered Relief Wall Art
Stack and glue plywood layers, then use plunge cuts to carve negative spaces and pathways across layers. The narrow 1.25 in blade width allows tight internal shapes without drilling starter holes.
Puzzle Box with Sliding Panels
Make a small box with concealed slides and stops. Plunge precise grooves for sliders and spring detents; the blade’s control helps keep tolerances snug so panels move smoothly but remain hidden.