Features
- Cuts 1/2" coarse-thread mild steel threaded rod
- Laser-etched size markings for quick identification
- Hardened steel construction for extended cutter life
- Includes upper and lower cutting dies and set screws
Specifications
| Thread Size | 1/2" |
| Thread Standard | Coarse |
| Material | Hardened steel |
| Color | Stainless steel |
| Included Pieces | Upper & lower cutting dies; upper & lower set screws |
| Is It A Set? | Yes |
| Number Of Pieces | 2 |
| Product Height (In) | 2.5 |
| Product Length (In) | 0.5 |
| Product Width (In) | 4.3 |
| Product Pack Quantity | 2 |
Replacement cutting die set for cutting 1/2" coarse-thread mild steel rod. The set includes upper and lower dies made from hardened steel and laser-etched with size markings for identification. Intended for use with the DCS350 threaded rod cutting tool.
Project Ideas
Business
Mobile Jobsite Rod Cutting & Labeling
Offer on-site cutting of 1/2" coarse-thread rod for electrical, HVAC, and sprinkler contractors. Measure, cut, deburr as needed, and label each piece by zone/elevation. Bundle by trade and deliver to lifts or carts. The die set’s clean cuts reduce rethreading time and speed installation.
Pre-Cut Trapeze Hanger Kits
Sell ready-to-install kits for MEP support (Unistrut + 1/2" rods, nuts, washers) in standardized or custom lengths. Each kit arrives labeled and bagged per location, reducing onsite labor and errors. Offer volume discounts and rapid turnaround for change orders.
Custom-Length E‑Commerce Service
Launch an online storefront where customers select rod lengths in 1/4" increments for 1/2" coarse-thread mild steel. Provide optional end caps, couplers, and hardware packs. Use the DCS350-compatible dies for burr-free cuts, then batch, label, and ship within 24–48 hours.
Contractor Tool Care & Die Replacement Program
Provide a subscription service that inspects DCS350 tools, replaces worn 1/2" cutting dies, cleans and calibrates cut-length stops, and restocks common hardware. Offer onsite service calls with loaner tools to minimize downtime.
Short-Term Rental & Training
Rent out the DCS350 with fresh 1/2" die sets for small contractors or facility teams who don’t need a full-time tool. Include quick training on safe, accurate cuts and a starter hardware kit. Upsell consumables and scheduled pickups for multi-day projects.
Creative
Adjustable Industrial Shelving
Build heavy-duty, loft-style shelves by cutting 1/2" coarse-thread rod to custom heights for each corner post. Use nuts and washers under each shelf to fine-tune level and height. The clean cuts from the DCS350-compatible die set preserve threads so shelves can be reconfigured frequently without chasing threads.
Ceiling Pot Rack / Plant Grid
Create a suspended grid using 1/2" threaded rod as vertical hangers from joists and a steel flat-bar or Unistrut frame. Cut rods to precise drop lengths so the rack sits perfectly level. Use nuts as adjustable stops for hooks and accessory bars to move plants or cookware easily.
Workshop Panel Clamp & Press Kit
Cut sets of 1/2" threaded rods to build modular panel clamps for woodworking glue-ups and a small shop press. Pair rods with hardwood cauls and large washers/wing nuts for quick, even pressure. Coarse threads make adjustments fast, and the clean, square cuts ensure nuts run smoothly.
Outdoor Firewood or Garden Tool Rack
Assemble a weather-resistant frame from pressure-treated lumber or Unistrut and use cut 1/2" threaded rods as adjustable crossbars. The rods can be moved up/down with nuts to accommodate varying log sizes or to organize rakes and shovels neatly.