NoDrop Tools LLC NoDrop Tools Screw Holding Screwdriver Set

NoDrop Tools Screw Holding Screwdriver Set

Features

  • Made by Technicians for Technicians!
  • Holds screw securely for starting or removing
  • One handed smooth operation
  • Includes Clamshell for storage and protection!
  • Non-conductive textured handle

Specifications

Color Blue
Unit Count 5

This four-piece set of slotted and Phillips screw-holding screwdrivers holds screws securely for one-handed starting and removal. Each tool has a non-conductive textured handle, a smooth one-handed operation mechanism, and comes in a clamshell case for storage and protection.

Model Number: B09168HHND

NoDrop Tools LLC NoDrop Tools Screw Holding Screwdriver Set Review

4.6 out of 5

A small tool that fixes a big everyday headache

I spend a lot of time starting screws in awkward, overhead, and one-handed situations—places where gravity and clumsy angles conspire to drop hardware exactly where I don’t want it. After a few weeks with the NoDrop screw-holding set, I’ve found myself reaching for it instinctively any time I’m on a ladder, buried in a cabinet, or working with tiny hardware that likes to vanish. It’s not flashy, but it solves a common problem with a simple, reliable mechanism.

What’s in the set

The set includes four screw-holding drivers—two Phillips and two slotted—in short and long lengths, plus a clamshell case. The drivers are easy to spot in a crowded bag thanks to their bright blue, non-conductive textured handles. The case is basic but protective; it keeps the mechanism tips from collecting debris and protects other tools from getting gouged.

While the manufacturer doesn’t advertise exact sizes, the coverage is sensible: you can match the tip to typical small to medium fasteners used in fixtures, panels, and appliance enclosures. The long drivers buy reach into deep housings and past obstructions; the short ones are great in tight quarters where a long shaft becomes a liability.

How the holding mechanism works

Each driver integrates a screw-holding mechanism around a conventional tip. The action is truly one-handed: position the screw on the tip, squeeze or slide the collar to capture it, and it stays centered and secure while you start the threads. Release when the screw is underway, and it functions like a normal screwdriver.

Key points from my use:
- It grips both ferrous and non-ferrous screws (brass and many stainless varieties), which is the main advantage over magnetized tips.
- The hold is firm enough to orient a screw horizontally or upside down without it wobbling off.
- Starting is easier when the screw head is seated square to the tip before you engage the hold.

It’s worth noting this is not a high-torque arrangement. The holding collar is designed to help you place and start a fastener. Once a few threads are engaged, I back off the mechanism and finish driving normally.

In practice: where it earns its keep

  • Overhead electrical fixtures and junction boxes: I regularly start cover screws with one hand while the other manages the plate. The driver keeps the screw aligned without the tip camming out as I thread it in.
  • Appliance panels and HVAC housings: Sheet-metal screws in small cutouts are easy to lose. The long Phillips holds them steady while I reach into awkward openings.
  • Dash panels and cabinetry: Short drivers shine here; they reduce the lever arm that would otherwise make you push off-axis and strip the head.
  • Electronics and low-voltage work: The non-conductive handle feels secure and insulates your grip from cold metal, though I treat it like any non-rated handle—never as an excuse to work on live circuits.

For removal, the holders are handy when a screw is nearly out and you don’t want it to fall into a void. I’ll capture the screw, back it out the last few turns, and bring it straight out with the driver.

Ergonomics and build

The handles are a good diameter—big enough for control without being bulky. The texture is subtle but effective; even with sweaty or gloved hands, I didn’t feel like I was fighting for grip. The mechanism is smooth out of the box, with a positive feel that tells you when the screw is captured. I didn’t need two hands to reset the collar at any point, which matters when you’re balancing a panel or fixture with your other hand.

Shaft stiffness is appropriate; there’s no disconcerting twist when you apply reasonable starting torque. The tips have held their shape after repeated starts on sheet-metal screws, and I didn’t notice premature wear.

Maintenance is minimal. I wipe the tips after dusty work and keep them in the case to avoid grit getting into the moving parts. I wouldn’t oil the mechanism—light residue can migrate to the screw head and reduce friction where you need it. A quick blast of compressed air is plenty if you pick up debris.

Performance limits and technique notes

No tool is universal, and these drivers are no exception.

  • Screw head style matters. Pan and oval heads seat most positively; countersunk heads also work fine, but alignment is more sensitive. If the screw rocks on the tip before engaging the hold, you’ll fight it later.
  • Size range is practical, not infinite. Very large, heavy screws aren’t this tool’s domain, and very tiny precision screws can be fiddly. For the small-to-medium hardware found in fixtures, panels, and brackets, it’s right at home.
  • Don’t ask the mechanism to do the tightening. Capture, start, release, and drive—this sequence avoids extra wear on the holding parts and gives you more feel at the tip.

A couple of simple adjustments boosted my success rate:
- Press the screw head firmly onto the tip before capturing to ensure it seats concentric.
- Start with controlled pressure and short turns to get the first thread to bite—especially on thin sheet metal where misalignment is easy.

How it compares to other approaches

Magnetized drivers are great—until you’re working with brass or certain stainless screws that won’t cooperate. This set doesn’t care what the screw is made from. Clip-style screw starters can help place a screw, but most require you to swap to a separate driver to actually turn it. These drivers integrate the hold and the drive in one tool, so there’s no handoff mid-start.

There are also “sticky” gels and tapes people use as hacks. They work in a pinch but leave residue and don’t provide positive control. The NoDrop approach is cleaner and repeatable.

Value

You can find cheaper ways to hold a screw, but I view this set as a time-and-frustration saver. If you frequently work overhead, inside enclosures, or anywhere a lost screw costs time, the price is easy to justify. If your work is mostly open-bench assembly with ferrous screws, a magnetized driver may cover most of your needs for less. The advantage here is confidence in finicky situations and with non-magnetic fasteners.

The inclusion of both long and short drivers for each tip style increases the set’s utility. I used every piece in the kit during the first week, which isn’t always the case with multi-piece sets.

Who it’s for

  • Electricians, HVAC, appliance, and field service technicians who constantly start screws out of position or overhead.
  • DIYers tackling fixtures, cabinets, and hardware where one hand is usually occupied.
  • Anyone who regularly deals with brass or stainless screws where magnets won’t help.

If your work is primarily heavy carpentry or structural screws driven with impact tools, this isn’t the tool you need.

Safety note

The handle is non-conductive and textured, which is comfortable and confidence-inspiring, but it’s not a substitute for an insulated, voltage-rated tool. I treat these as I would any standard driver: power down and verify.

The bottom line

The NoDrop screw-holding set has earned a permanent slot in my go bag because it reliably does one thing that matters: it holds screws securely so I can start them cleanly with one hand. The mechanism is smooth, the tip coverage is sensible, and the long/short pairing makes it useful in a wide range of scenarios. It’s not a torque tool and it’s not for every fastener, but within its lane it’s fast, predictable, and better than the common alternatives when magnets won’t cut it.

Recommendation: I recommend this set to technicians and serious DIYers who routinely work in awkward positions, overhead, or with non-magnetic screws. The convenience and reduced fumble factor outweigh the added cost, and the integrated hold-and-drive approach streamlines a task you probably do dozens of times a day.



Project Ideas

Business

Solo Mobile Repair Service

Offer on-the-go electronics and small-appliance repair where the technician often works alone. The screw-holding drivers enable one-handed screw starting/removal and the clamshell case keeps organized bits and drivers—reducing time per job and allowing a single technician to handle more appointments per day.


One-Person Light Fixture & Switch Installer

Market a fast-install service for light fixtures, ceiling fans and switches to homeowners and landlords. The non-conductive, screw-holding drivers increase safety and make it simpler for one installer to secure screws in awkward overhead or recessed positions without needing an extra set of hands.


DIY Kit Retail + Workshop Series

Create and sell DIY furniture or decor kits (picture frames, spice racks, small shelving) bundled with a NoDrop driver set. Host paid in-person or virtual workshops teaching assembly techniques—leveraging the one-handed holding to teach solo assembly skills and upsell tool sets for students to take home.


E‑commerce Assembly & Prep Service

Provide light assembly, QA and packing services for small online sellers who ship partially assembled goods. The screw-holding drivers speed repetitive fastening tasks, reduce cross-threading and keep workstations tidy with the included clamshell—letting you offer faster turnaround and lower labor costs per unit.

Creative

Screw-Top Mosaic Wall Art

Use a plywood backing and a variety of screws (flathead, panhead, different lengths) to create a textured mosaic. The NoDrop screw-holding drivers let you place and start each screw one-handed for precise spacing and patterns, then finish tightness for a secure, durable piece suitable for indoor/outdoor display.


Mini Floating Shelves Kit

Design and pre-cut small floating shelf kits that customers assemble at home. The set's screw-holding feature makes single-person installation easy—include pre-drilled brackets, screws and an instruction card demonstrating one-handed starting into wall anchors for a tidy DIY product offering.


Kinetic Screw Sculpture

Build a tabletop kinetic sculpture using screws as axles and fasteners for moving parts (gears, spinning discs, pendulums). The secure one-handed holding lets you accurately position pivot screws and quickly test movement while assembling, speeding iterative adjustments during the creative process.


Upcycled Electronics Jewelry & Trinkets

Salvage small fasteners and metal parts from old electronics to make necklaces, cufflinks and keychains. The textured, non-conductive handle provides a safe, controlled way to remove and start tiny screws when disassembling devices and when anchoring found components into new jewelry pieces.