DeWalt 0.095 in. x 144 ft. Replacement Line for Cordless Battery Operated Bump Feed String Grass Trimmer/Lawn Edger

Why I switched to a thicker line

I’ve run plenty of 0.080-inch line on cordless trimmers over the years, mostly for lawn edges and weekly touch-ups. After a season of thicker summer growth and more fence-line weeds, I moved up to the DeWalt 0.095 trimmer line. The difference wasn’t subtle. On both a 20V DeWalt trimmer and a 60V FlexVolt model, this line cut cleaner, needed fewer bumps to keep pace, and held up better against woody stems and abrasive edging along concrete. It’s still just line—no miracle cure for brush that really needs a blade—but it strikes a strong balance between cut quality, durability, and cordless efficiency.

What you get

This is a 144-foot bulk spool of 0.095-inch line meant to refill bump-feed heads. The spool is compact enough to sit in a toolbox without unraveling everywhere, and the material has a slightly slick, “aerodynamic” feel that’s stiffer than basic round nylon but not brittle. DeWalt says it blends flexible and impact-resistant materials. In practice, it behaves like a tougher composite that resists fraying and line weld (where strands fuse together on the spool) better than standard nylon.

Compatibility is straightforward: if your head accepts 0.095-inch line, this will fit. I wrapped it on DeWalt heads without issue, and it will work across most bump-feed trimmers that spec 0.095. If you’re refilling a DeWalt DCST-series trimmer, it’s a drop-in match.

Loading and setup

Line is only as good as the wrap. A sloppy fill causes tangles and weld regardless of brand. With this spool, I had the best results by:

• Pre-cutting equal lengths for a two-line head (or one long length for single-line), then straightening the segments before winding.
• Winding tightly and evenly in the direction marked on the spool, leaving 6–8 inches for the tails.
• Avoiding overfilling; stop just under the maximum line indicator.
• Giving the spool a quick tug on each end before popping it back in the head to seat the wraps.

Installation is easy, and the material’s surface finish helps it glide into place without biting or kinking. If you’ve ever dealt with soft lines that “memory coil” or melt into themselves, this one is a noticeable improvement—especially in hot weather.

Cutting performance

On regular turf, the DeWalt 0.095 line slices cleanly and throws clippings evenly without shredding the grass tips. It’s not fussy about technique: light passes along borders and walkways leave a crisp edge with minimal fuzz. Compared with 0.080, it’s more forgiving when you misjudge the angle near concrete; it doesn’t explode on impact as easily.

In heavier patches—tall orchard grass, thistles, and the rough mix under fences—the extra diameter gives it real authority. I needed fewer passes to knock down thick stalks, and there was less bogging when the head met a tangle. The line’s stiffness helps it “stand up” at full length, which improves swath control and reduces the urge to overstay in one spot.

Is 0.095 a brush solution? Not really. If your weekly workload includes saplings and dried, woody stems, a brush blade or 0.105 line on a high-torque unit is better. But for the typical homeowner or acreage caretaker who occasionally faces overgrowth, this is a smart upgrade from 0.080.

Runtime and cordless efficiency

Thicker line adds drag. Normally, jumping from 0.080 to 0.095 on a 20V trimmer costs you noticeable runtime. With this line, that hit was smaller than I expected. The “aerodynamic” profile seems to reduce wind resistance compared to basic round stock, and because the line lasts longer between bumps, I wasn’t spending energy spooling out fresh lengths as often. Over multiple sessions, my 20V trimmer still completed a standard property on a single battery, which wasn’t always true with generic 0.095.

On a 60V trimmer, runtime was a non-issue. Torque and speed stayed consistent, even cutting at the head’s wider swath setting.

Durability and line life

Three things matter here: abrasion resistance, impact toughness, and weld resistance.

• Abrasion: Along block walls and pavers, the DeWalt 0.095 line wears evenly instead of feathering apart. You still lose length when you get aggressive on concrete—physics hasn’t changed—but the material consumes more slowly and holds its shape.
• Impact: Hitting chain-link or rebar is a line breaker. This line doesn’t make you invincible, yet it survives casual taps much better than lighter diameters. I also noticed fewer micro-cracks after nicking rocks; the next few minutes of trimming weren’t followed by rapid-fire breaks.
• Weld: On hot days with long, continuous cutting, some lines fuse on the spool and stop feeding. I ran this during a 90-degree afternoon, alternating edging and trimming, and didn’t experience weld. The combination of material and smooth winding helped.

If you primarily cut soft grass, you’ll notice this line simply lasts longer than 0.080. In heavy weeds, it’s more of a tie between runtime and line preservation: you’ll still reload, just not as often.

Noise and feel

Thicker line often whines at high speed. This one is quieter than generic round 0.095 I’ve used. There’s still an audible whoosh at full throttle, but the tone is less shrill. Vibration at the head is minimal, especially on brushless trimmers. The line’s stiffness reduces flutter at full extension, which makes the tool feel more planted and predictable at the edge of beds and around obstacles.

Value and warranty

A 144-foot spool translates to multiple refills, even on dual-line heads. Cost per refill is competitive, and the performance bump over cheaper bulk line justifies the spend if you trim weekly. DeWalt backs it with a 90-day money-back guarantee and its standard limited warranty framework, which is rare for consumables. Also notable: it’s made in the USA with globally sourced materials.

If you’re trimming a small city lot with light growth, 0.080 may still be the most economical choice. But once you’re dealing with thicker edges, longer runs, or a mix of grass and weed stems, this 0.095 line pays for itself in fewer bumps and less fuss.

Tips for best results

• Keep your spool clean. Dirt and grit increase friction and encourage weld.
• Don’t overfill. Leave a small gap under the spool rim to prevent binding.
• Use the right head speed. Mid to high speed cuts cleaner with less line slap; low speed invites tear-out on tougher weeds.
• Let the tip do the work. Crowding the head reduces line life and risks weld from heat.
• Refresh your cut length early. If you’re down to nubs, bump before charging into thick patches.

What could be better

• Visibility: A brighter color would be easier to see in shadows and against mulch. The current finish isn’t hard to track, but high-contrast line is helpful near delicate plantings.
• Size options in one spool: If DeWalt offered a mixed-diameter pack for those who switch between 0.080 and 0.095 seasonally, it would simplify stocking for small shops.
• Packaging: A built-in dispenser notch on the spool would make it easier to pull consistent lengths without a separate wrap keeper.

None of these are deal-breakers, and they lean more toward convenience than performance.

Recommendation

I recommend the DeWalt 0.095 trimmer line for anyone running a cordless trimmer who needs more bite and longevity than 0.080 provides. It loads cleanly, resists weld, and strikes a smart balance between cutting power, runtime, and durability. On 20V trimmers, the slight drag increase is offset by fewer bumps and faster clearing of thick growth; on 60V units, it feels right at home. If your yard is light-duty turf only, you can save a few dollars staying thinner. For mixed grass, edging along hardscapes, and the inevitable weekly weeds, this 0.095 line is the fit-and-forget upgrade I’ll keep on the shelf.