DeWalt Structure Safety Glasses

Overview

I’ve been wearing the DeWalt DPG93 safety glasses on and off jobsites for the past few months, from garage woodworking sessions to outdoor yard work and metal grinding. I was drawn to them for three reasons: the extended side coverage, the lightweight frame, and the promise of ANSI Z87.1+ impact protection. In practice, they’ve proven to be a dependable, no-fuss pair of safety glasses that strike a solid balance between comfort, coverage, and clarity without looking overly industrial.

Fit and comfort

The frame is light enough that I forget I’m wearing it after a few minutes. The rubber nosepiece is grippy without feeling tacky, and it keeps the glasses in place when I’m sweating or looking down at a miter saw. I don’t get the hot spots on the bridge of my nose that some harder, narrower nose pads can create.

Temple pressure is minimal. On my medium-width face, the arms sit securely without pinching. The extended side coverage is integrated into the lens shape rather than added as bulky guards, so it doesn’t flare out or rub against my cheekbones. I had no trouble wearing these for multi-hour tasks like deck work and cleanup. If your head is significantly larger than average, the wrap might feel snug where it curves around the temples; conversely, very narrow faces might want a model with fully adjustable nose pads for a tighter lock.

Optics and protection

The lenses are polycarbonate and hard-coated. Clarity is good across the central field, with only mild distortion at the very edges where the lens curvature increases—typical for wraparound eyewear. For close work like marking cut lines or reading a tape, I had no issues with optical clarity or eye strain.

Protection-wise, these meet the ANSI Z87.1+ standard, which covers high-mass and high-velocity impact—exactly what you want around wood chips, fasteners, and grinding debris. The side coverage is a standout feature. It blocks lateral debris better than minimalist designs without feeling like a full goggle. It’s not a sealed design, though, so this isn’t the right choice for fine dust environments that require a D5 rating or for chemical splash (D3). For carpentry, yard work, metal fabrication, or general shop use, the coverage is excellent.

UV protection is rated at 99.9% UVA/UVB, and that’s useful even with the clear lenses. I’ve used both clear and smoke variants: clear is my go-to indoors and on overcast days; smoke makes outdoor work in bright sun more comfortable by knocking down glare without dimming the world too much.

In the field

• Woodworking: Ripping and crosscutting on the table saw and miter saw, the glasses stayed put and didn’t create blind spots when tracking a blade or fence. The side coverage helped with stray chips thrown off the blade guard.
• Metalwork: During light grinding and cutting, they deflected sparks and grit well. For heavy grinding I still pair with a face shield, but the glasses alone handled casual tasks confidently.
• Yard work: While trimming and mowing, the wrap and UV protection were appreciated. Even with sweat and sunscreen, the nosepiece didn’t slip.

Fogging is the one area where I noticed occasional hiccups. There’s no dedicated anti-fog coating, and in humid conditions—especially with a respirator or dust mask—the lenses can fog at low speeds or when I’m standing still. Cracking the glasses slightly away from the face or using an anti-fog wipe takes care of it, but out of the box these are not “fog-proof.”

Durability and maintenance

The hard coating shrugs off fine dust and casual cleaning better than bare polycarbonate, but it isn’t magic. If you wipe these dry when covered in grit, micro-scratches will accumulate. I treat them like any other shop eyewear: rinse under water, dab with a clean microfiber, and store in a pouch. After weeks of use, my lenses still look good, with only minor hairline marks near the edges from glove knuckles and toolbox life.

The hinges are basic but tight, and I haven’t noticed play developing. The rubber nosepiece hasn’t lifted or gotten slick, even after solvent exposure from finishing work. There’s no included case or pouch in the box—just the glasses—so plan to add a sleeve to keep the lenses clean.

One note: there’s no limited warranty on this product. That’s common for safety glasses at this tier, and I treat them as consumables. If you’re hard on eyewear, buying a second pair to stage in your truck or shop isn’t a bad plan.

Compatibility with other PPE

I tested these with both earplugs and over-ear muffs. The temples are relatively slim, and while the extended side coverage adds a bit of bulk near the corners, I still got an acceptable seal with my 3M earmuffs. As always, your mileage may vary depending on muff tension and head shape, but I didn’t notice a major drop in noise attenuation.

Under a hard hat, the glasses sit comfortably without fighting for space. With a half-mask respirator, fogging can appear sooner because the warm exhale rides up behind the lenses. Again, anti-fog wipes or better mask fitment help.

Aesthetics and lens options

If you dislike the “goggle” look, these land in a sweet spot: more coverage than minimalist frames but with a streamlined profile that doesn’t scream lab gear. The clear lens keeps colors accurate under shop lighting, and the smoke lens is dark enough for bright outdoor work without making shaded areas too murky. Those are the two practical tints available. If you prefer amber/contrast or mirrored coatings for specialty tasks, you’ll need to look elsewhere.

Limitations and trade-offs

• Anti-fog: No dedicated anti-fog coating. Expect occasional fog in humid conditions or with masks.
• Not sealed: Great for chips and splinters, but not for fine dust or chemical splash protection.
• Lens options: Limited to clear and smoke; no amber or mirrored choices.
• Warranty: None. Treat as consumable PPE and store carefully to extend life.

None of these are deal-breakers for general carpentry, shop work, or outdoor tasks, but they’re worth knowing before you buy.

Buying advice and care tips

• Choose your lens: Clear for indoor and mixed light; smoke for bright outdoor work. Both provide full UV protection.
• Keep them clean: Rinse before wiping, use a microfiber cloth, and store in a soft pouch to avoid scratches.
• Add anti-fog: A simple wipe or spray makes a noticeable difference in humid weather or mask use.
• Check the stamp: Look for the Z87+ marking on the lens or frame so you’re sure you grabbed the right pair from the truck.
• Pair with a face shield for heavy grinding: Impact-rated glasses are a baseline, but full shields protect your face from ricochet and larger fragments.

Verdict

The Structure glasses deliver what I want most from everyday PPE: I forget I’m wearing them until something hits them. The wraparound design and extended side coverage deflect debris effectively, the lenses are optically clean in the working zone, and the frame stays comfortable during long sessions. The Z87.1+ rating inspires confidence for high-velocity impact, and the UV protection makes them viable both indoors and out.

I would recommend these glasses. They strike a practical balance of coverage, comfort, and clarity at a sensible weight, and they hold up well with basic care. If you need an anti-fog coating out of the box, sealed dust protection, or niche lens tints, you’ll want another model. For most shop, site, and yard tasks, though, these are an easy pick that you’ll actually wear—exactly what good safety gear should be.