Features
- Hammer and drill modes for masonry drilling
- Two gear speeds (high torque and high speed) for greater control
- Compatible with MATRIX quick connect system (power unit sold separately)
- Compact storage case included
- Keyless 1/2 in chuck
Specifications
| Chuck Size | 1/2 IN |
| Chuck Type | Keyless |
| Gtin | 00885911842624 |
| Product Application | Drilling |
| Height | 5.9 IN |
| Length | 11.7 IN |
| Width | 9.9 IN |
| Weight | 3.5 LB |
| Includes | (1) Hammer Drill Attachment; (1) Storage Case |
Related Tools
Related Articles
Attachment for the MATRIX quick-connect system that provides hammer and drill modes for drilling into masonry. Designed to be used with a separate MATRIX power unit. Includes a compact storage case.
Model Number: BDCMTHDSTFF
Project Ideas
Business
Masonry Mounting Service
Offer a flat-rate service to mount TVs, shelves, handrails, cameras, hose reels, and mailbox posts on brick, block, or concrete. The hammer drill attachment speeds anchor installs while the keyless chuck enables rapid bit swaps. Package options by substrate and hardware type.
Property Management Anchor Repairs
Provide recurring maintenance for apartment and commercial buildings: re-anchoring door closers, strike plates, signage, bike racks, and bollards in masonry. Two gear speeds let you handle both delicate repairs and heavy-duty anchors efficiently. Bill per visit or via monthly retainer.
Exterior Fixture Prep for Trades
Partner with electricians and HVAC techs to pre-drill and set anchors for conduit straps, light fixtures, junction boxes, and mini-split brackets on masonry. You handle layout and anchoring; they complete wiring and equipment. Fast turnaround makes you a valuable subcontractor.
Custom Concrete Planters With Drainage
Produce and sell large concrete planters with properly drilled drainage and optional caster plates anchored underneath. Use the drill mode for clean holes and hammer mode for hardware anchors. Market to cafes, offices, and landscape designers.
Event and Retail Signage Anchoring
Install removable or semi-permanent signage, standoffs, and product displays on block or concrete walls for pop-up shops and retail fit-outs. Quick bit changes and precise drilling reduce downtime during build-outs. Offer rapid install/tear-down packages.
Creative
Brick Mosaic Feature Wall
Design a mosaic on an exterior brick or block wall and use the hammer mode to drill anchor points for a lightweight backing frame. Start in low-speed/high-torque for pilot holes, switch to high-speed for clean-up, then fasten panels. The keyless 1/2 in chuck makes bit changes quick as you move across the pattern.
Cinder Block Vertical Garden
Stack cinder blocks into a modern planter wall and anchor the structure to a concrete pad or masonry wall for stability. Drill drainage and irrigation pass-through holes, then mount trellis hardware and drip line clips. Two gear speeds give control for both anchors and smaller accessory fittings.
Backyard Pizza Oven Base
Build a concrete and brick base, drilling holes to set angle-iron supports and anchor refractory components. Use hammer mode to set sleeve anchors into the slab and drill pilot holes for accessory brackets. The compact case keeps masonry bits organized on-site.
Garage Training Wall
Create a pull-up and hangboard station on a concrete wall by drilling for wedge anchors and lag shields. Start with precise pilot holes in drill mode, then switch to hammer mode for anchor sizing. Mount additional hooks for bands and storage.
Illuminated House Number on Brick
Fabricate a metal or wood plaque with LED backlighting and mount it to a brick facade. Drill anchor locations, add standoff hardware for a floating effect, and clip low-voltage cable neatly with masonry clips. Two speeds help prevent overdriving small fasteners.