Features
- Carbide cutting edge (carbide‑brazed) for increased wear resistance
- T‑shank for quick blade changes and broad jig saw compatibility
- Thin kerf to reduce material removal and heat buildup
- Ground, side‑set teeth for straight cutting
- Designed for straight, curved and bevel cuts in hard/specialty materials
- Pack of 3 blades
Specifications
| Width | 0.37 in |
| Cut Type | Straight |
| Thickness | 0.05 in |
| Shank Type | T‑shank |
| Tooth Design | Ground, side set |
| Total Length | 3-5/8 in (3.625 in) |
| Pack Quantity | 3 |
| Teeth Per Inch | 12 TPI (approx. 0.08 in tooth spacing) |
| Cutting Edge Material | Carbide |
| Intended Cut Materials | Carbon fiber and other abrasive/specialty materials |
Related Tools
Related Articles
Carbide-edge T‑shank jig saw blades designed for cutting abrasive or specialty materials such as carbon fiber. The blades use a carbide brazed edge for extended wear compared with standard bi‑metal blades, a thin kerf to reduce material removal and heat, and a geometry intended for both straight and curved cuts including bevel cuts. Pack of three blades.
Model Number: T108BHM3
Project Ideas
Business
Drone Racing Parts Microbrand
Produce small-batch carbon fiber frames, braces, and protection plates for FPV racers and freestyle pilots. Leverage the blades for quick iteration on new designs and sell kits with hardware; upsell customization (camera mount angles, arm thicknesses).
Custom CF Pickguard & Panel Shop
Offer bespoke carbon fiber pickguards, control plates, pedalboard decks, and rack panels with precise openings. The blade’s curved and bevel capability lets you turn around one-off templates fast for guitar techs, studios, and touring rigs.
Fiber Cement Siding Cutout Service
Provide on-site notch and outlet cutouts in fiber cement boards for remodelers and electricians. Carbide blades handle abrasive cement board cleanly, and T‑shank swaps let you adapt quickly to tight-radius or straight cuts on ladders and scaffolds.
Knife Scale Blanks Boutique
Sell pre-shaped G10/Micarta handle blanks in popular profiles with clean, consistent edges that save makers time. Use thin-kerf blades to reduce waste on costly materials; offer custom tracing from customer-supplied templates.
Composite Inlay Cutting Service
Partner with furniture and cabinet shops to cut carbon fiber or Garolite inlays, logos, and trim bands that drop into their woodwork. Provide fast turnaround on curves and bevels, plus nesting to maximize yield from premium sheet stock.
Creative
Carbon Fiber Inlay Panels
Cut intricate curved and beveled inlay shapes from thin carbon fiber sheet to embed into wood tabletops, boxes, or instrument headstocks. The thin kerf keeps gaps tight and the carbide edge resists fraying in composite laminates for crisp, flush fits.
Custom FPV Drone Plates
Design and cut top/bottom plates and camera side plates from carbon fiber with smooth arcs and weight-saving cutouts. The 12 TPI, thin-kerf blade tracks curves cleanly while minimizing delamination and heat on epoxy-based laminates.
G10/Micarta Knife Scales
Rough-cut ergonomic handle outlines and finger choils from G10 or Micarta before sanding and shaping. Carbide edge blades handle abrasive fibers without burning out, and side-set teeth help keep straight reference cuts accurate.
Carbon Fiber Pickguards & Covers
Make guitar pickguards, rear cavity covers, and pedalboard plates from CF or Garolite with both straight runs and tight-radius corners. Bevel-cut edges for a pro look using the blade’s geometry and maintain crisp screw countersink boundaries.
Modern Wall Art & Monograms
Create layered wall art, letters, or geometric monograms by cutting CF or FR4 silhouettes and laminating onto wood or metal backers. The blade’s thin kerf yields clean internal cutouts and minimal sanding on delicate inner corners.