DeWalt 60V MAX cordless brushless 7-1/4 in. circular saw with 6.0Ah battery and 1/4 in. impact driver (combo kit)

Why this combo kit earned a spot in my truck

I’m picky about what rides along to the jobsite. If a tool (or kit) can’t carry its weight all day without a cord, it doesn’t come. After several weeks with DeWalt’s FlexVolt circular saw and 1/4 in. impact driver combo, I’m confident calling this a pack-and-go setup for framing, remodeling, and punch-list work. The saw has the grunt I expect from a corded tool, and the driver handles most fasteners I throw at it—all supported by a thoughtful battery mix that covers power and portability.

The circular saw: cordless power that feels truly corded

The 7-1/4 in. saw is the star here. It’s brushless, runs on a 60V FlexVolt pack, and spins up to 5,800 RPM. In practice, that translates to confident cuts with very little tendency to bog. I ripped and crosscut SPF 2x stock, trimmed engineered lumber, and made a handful of passes through 4x material. The saw maintained speed and didn’t complain, even when I intentionally pushed a little harder than I should have. I wouldn’t call it reckless to say: if you’re coming from a mid-tier corded sidewinder, this feels familiar in output but more convenient in use.

Cut quality is clean with a decent stock blade, and it improves with a better framing blade. The shoe tracks predictably along a straightedge, and the LED helps illuminate the line in darker corners of a site. I appreciate that the footplate stays steady under pressure—there’s no unnerving flex when you’re balancing on a beam.

Ergonomically, the saw is balanced for two-handed cuts. It’s not the lightest 7-1/4 in. cordless saw I’ve used, but the weight is well placed over the cut. After a morning of trimming rafters, my wrists felt fine, which is not something I say about every high-voltage saw. Noise and vibration are controlled; it’s still a circular saw, but it doesn’t drone or chatter excessively.

Sightline always matters, and blade-side preference is one of those personal things that can make or break a saw for you. The view of the cut line is solid from a right-handed grip, though users with a strong preference for the opposite blade orientation should try it in hand before committing. The lower guard retracts reliably, and I didn’t experience any hang-ups entering a cut.

Runtime on the included 6.0Ah FlexVolt battery is excellent. On a typical framing day—think dozens of crosscuts, a few bevels, and some trimming—I only needed to top off once over lunch. The brushless motor’s efficiency shows here; it stays cool enough that I never felt compelled to pause between cuts.

The impact driver: compact, capable, and best with the smaller pack

If the saw is the headline act, the 1/4 in. impact driver is the capable opener. It’s brushless, takes the same lithium-ion packs, and is compact enough for cabinet work and punch lists. With the 2.0Ah battery, its balance is spot-on, and it slides into tight corners easily. The LED is bright enough to light a fastener in a dim closet without blinding you.

Performance-wise, it handles structural screws, cabinet screws, and most timber screws in the 5–6 in. range without fuss, as long as you pick the right bit and pilot appropriately when needed. Driving big lags all day isn’t its job, but it has the muscle for occasional heavy fasteners. Trigger control is predictable for delicate tasks, and the motor never felt twitchy at low speed.

A quick note on batteries: the 2.0Ah pack is the right match for the driver most of the time. It keeps weight down and makes the tool more maneuverable. You can pop the 6.0Ah FlexVolt on in a pinch, but it turns a nimble driver into a nose-heavy handful. The versatility is nice to have, though—one charging system, two tools, no thinking.

Batteries, charger, and workflow

DeWalt’s FlexVolt system is the backbone of the kit. The 6.0Ah battery is the one I run on the saw; it delivers the power the saw expects and the runtime I need to stop thinking about battery status. The 2.0Ah battery feels purpose-built for the driver. I like this mix because it covers two different use cases without forcing a compromise. For pros, I’d still consider adding a second high-capacity pack so you can keep the saw fed while the first battery lives on the charger.

The included DCB115 charger is compact and dependable in my time with it. It’s not a speed demon; topping off the 6.0Ah battery takes a while, so plan your charging around breaks or off-hours. If your workflow leans hard on the saw all day, a faster charger or an extra FlexVolt pack will make your life easier.

One small practicality note: the battery fuel gauge is easy to read, and the enclosure has tight seams that keep jobsite dust out reasonably well. Even so, I make a habit of blowing out the packs with clean air at the end of the day.

Build, controls, and day-to-day usability

I judge a kit by how fast I can get it from bag to first cut or fastener. This one sets up quickly. The depth and bevel adjustments on the saw are straightforward and hold their settings. The guard and shoe edge both inspire confidence when following a chalk line or a guide.

The impact driver’s collet snaps bits in securely and releases them without wrestling—one-handed bit changes are a non-event. The handle shape is classic DeWalt: grippy without being aggressive, and comfortable across a long day.

The contractor bag is better than an afterthought. It fits both tools, the charger, and spare blades and bits, with enough room that you don’t play Tetris to zip it closed. Zippers feel sturdy, and the base has enough structure to keep the tools from collapsing into a heap.

Performance limits and tradeoffs

No kit is perfect, and a few realities are worth mentioning:

• Weight and size: A 60V-class saw won’t win any lightweight contests. If you spend your day overhead, a smaller-diameter cordless saw might be more comfortable.
• Charger speed: The DCB115 is serviceable but not particularly fast, especially with high-capacity packs. Frequent saw use benefits from a second FlexVolt battery or a higher-output charger.
• Blade orientation: Depending on your preference, the sightline might not be ideal. Try the saw in hand to confirm you like what you see.
• Driver power ceiling: The impact driver covers 90% of everyday fasteners with ease, but if you routinely drive long structural fasteners or big lags, you’ll want a high-torque impact wrench alongside it.

None of these are deal-breakers; they’re just the practical edges of the kit’s design.

Value and who it’s for

As a package, you get two brushless, jobsite-ready tools, two batteries tailored for their roles, a charger, and a bag under one warranty umbrella. The 3-year limited warranty, 1-year free service, and 90-day satisfaction guarantee provide a meaningful safety net for working users who actually rack up hours on their gear.

I see the kit appealing to:

• Remodelers and framers who want a truly cord-free framing saw with pro-level power
• Pros and serious DIYers who prefer one bag that covers cutting and fastening for a day’s tasks
• Anyone already in the DeWalt ecosystem who wants to step into FlexVolt without starting from scratch

Final take

The FlexVolt combo strikes the balance I look for in a two-tool kit: the saw feels every inch a primary tool rather than a “kit extra,” and the impact driver holds up its end as a daily driver for fasteners. The brushless motors, 5,800 RPM on the saw, intelligent battery pairing, and thoughtful ergonomics make it easy to recommend.

Recommendation: I recommend this kit. The saw delivers corded-like performance with the convenience of cordless, the driver covers the lion’s share of fastening tasks, and the included 6.0Ah and 2.0Ah lithium-ion batteries fit each tool well. If you plan on nonstop cutting, budget for an extra FlexVolt pack or faster charger—but for most users, this combo is a reliable, efficient, and well-rounded addition to the jobsite.