Features
- $20 off if you pick up in one of our 150 warehouses through out the US
- Two bundles of 5 bags for a total of 10 bags for a total of 1312.5 square feet
- Kraft Faced. This insulation has a moisture barrier that is used for exterior surfaces
- R-13 type, 15W x 105L x 3.5 in. thick
Specifications
| Unit Count | 60 |
R-13 kraft-faced fiberglass batt insulation sized for 2x4 wall cavities (3.5 in thick), each batt measuring 15 in x 105 in. Package contains ten bags (two bundles of five) covering 1,312.5 sq ft and includes a kraft-faced moisture barrier intended for installation on exterior surfaces.
Project Ideas
Business
Acoustic Panel Kits (DIY + Pro)
Package the batt with pre-cut wood frames, staple‑on acoustic fabric, mounting hardware and safety gloves/masks as a DIY acoustic panel kit for podcasters, musicians, and streaming creators. Offer two tiers: consumer (simple assembly) and pro (pre-assembled panels). Market via social ads and local audio stores.
Custom Fitted Window Insert Service
Offer measurement, fabrication and seasonal storage of removable thermal window inserts using kraft‑faced R‑13 as the core. Target owners of older single‑pane homes and short‑term rental hosts with energy savings estimates; charge per window based on size and offer a pickup discount bundle for local warehouse pickup.
Insulated Pet Product Line
Produce a line of insulated pet beds, outdoor kennel liners and heated pet shelters using the kraft face for moisture resistance. Position as weatherproof and washable premium products for outdoor pets or cold climates; sell on marketplaces and through pet boutiques.
Small Contractor Pickup & Local Resale Bundle
Leverage the $20 pickup discount at multiple warehouses to assemble and resell convenient pre‑bundled packs to small contractors, handymen and Airbnb hosts who need frequent small orders. Offer local delivery, on‑site cutting service, and simple invoicing—market through contractor groups and Nextdoor.
Energy Retrofit Microservice for Rentals
Create a low‑cost 'quick retrofit' package for landlords and short‑term rental owners: measure 2x4 walls, install kraft‑faced R‑13 in accessible cavities, and provide a simple ROI sheet showing estimated energy savings. Charge a flat fee per room or per property and upsell seasonal window inserts or panel kits.
Creative
Removable Thermal Window Inserts
Build rigid, removable window inserts by sandwiching the R‑13 batts between thin hardboard (or corrugated plastic) and a decorative fabric facing. The kraft face becomes the exterior moisture barrier; seal edges with weatherstrip for a tight fit. Safe handling: keep the batt intact, wear gloves and a dust mask when measuring/cutting, and enclose the insulation so fibers can't escape.
DIY Acoustic Panels
Make framed acoustic panels for a home studio by mounting the batt inside shallow wooden frames and covering with breathable acoustic fabric. The thick fiberglass core absorbs mid/high frequencies; the kraft facing can face inward or be removed if you need more open absorption (handle accordingly). Sell or gift as matched sets with custom fabrics.
Insulated Pet Bed / Kennel Liner
Create durable, weather‑resistant pet beds or kennel liners by using the kraft‑faced batt as the insulating core and encasing it in a heavy‑duty, washable fabric cover with a zip closure. The kraft face helps repel moisture; keep the insulation fully enclosed to prevent pet contact with fibers.
Cold Frame / Seedling Heat Box Liner
Line a wooden cold frame, raised bed cloche, or portable seedling box with batt insulation to retain daytime heat and reduce nighttime losses. Use the kraft face toward the outside for moisture protection, and finish edges with trim so fibers remain contained—great for early‑spring seedlings.
Portable Cooler / Camper Insulation Inserts
Make insulated panels or removable liners for DIY coolers, camper cabinets, or picnic boxes using the batt as the insulating core and a water‑resistant outer shell. Lightweight, cut-to-fit panels can improve thermal retention in a van conversion or outdoor gear; always fully encase the insulation.