Progress Lighting Accessory Chain - 10' of 9 Gauge Chain, Indoor & Outdoor, P8757-108, Oil Rubbed Bronze

Why I reached for this chain

I needed a straightforward fix: extend and reposition a pair of fixtures—a Craftsman-style chandelier in a foyer and a lantern on a vaulted, covered porch—without compromising on strength or finish. The Progress accessory chain in oil-rubbed bronze promised a 10-foot run and a sturdy 9-gauge link, which is exactly the combination I look for when swaging a light to a new junction box or dropping a fixture to a more comfortable height. After putting it to work on both installs, I came away impressed by how robust it is for residential lighting and how well the finish blends with common oil-rubbed bronze hardware.

Build quality and finish

The first thing you notice is the heft. The 9-gauge wire gives each link reassuring rigidity—there’s no spindly, “big-box basic” feel here. The oil-rubbed bronze finish is a deep, warm brown with subtle highlights and a light texture. It reads as intentionally aged rather than glossy, which makes it at home next to vintage, farmhouse, or Craftsman fixtures. On my chandelier, the tone was an excellent match to the canopy and arms; on the porch lantern, it paired cleanly with darker bronze hardware without calling attention to itself.

Finish consistency is good end-to-end. Even after opening a few links, the coating held up well with careful tool use (more on that below). I didn’t see thin spots or overspray-type defects, and there was no greasy residue out of the box—just a clean, matte-to-satin sheen.

Installation experience

Ten feet is generous. For the foyer chandelier, it let me drop the fixture and add a gentle swag to center it under the table without splicing extra segments. For the porch lantern, I had enough leftover to keep a short length on hand for future projects.

A few practical notes from the installs:
- The links are not welded. That’s typical for lighting chain and, frankly, preferable for adjustability. I was able to open and close links with two pairs of pliers in a minute or two per cut. To protect the finish, I wrapped the jaws with painter’s tape and bent the link sideways (a slight twist) rather than prying it open. That keeps the shape truer and makes it easier to reseat tightly.
- Standard lamp cord threads through cleanly. I fed the cord through a few links at a time; a small piece of tape on the cord’s end helps prevent snagging.
- Count your links. If symmetry matters—say, matching two pendants over an island—count links rather than measuring the chain off the reel. It’s faster and gives you a tidy, consistent look.

The chain doesn’t include extra hardware, so you’ll need a quick link or threaded chain connector if you want a removable attachment at the canopy. I like using one small, matching quick link at the fixture end to make maintenance easier down the road.

Strength and load handling

In use, the chain behaves the way a 9-gauge lighting chain should: it resists deformation, holds a set without elongating, and doesn’t flex or creak under static load. The chandelier I hung is a substantial multi-arm fixture with glass shades, and the chain didn’t so much as hint at stretching while I was on the ladder making fine adjustments.

Because the links aren’t welded, I kept my adjustments smooth and avoided shock-loading. That’s good practice for any lighting chain, but it’s especially relevant if you’re working with a heavier fixture. If you want belt-and-suspenders, you can add a welded quick link at one end for peace of mind. For typical residential pendants and chandeliers, the chain is more than up to the task.

One important reminder: verify that your electrical box is rated for the fixture weight, and that your mounting bracket and canopy hardware are appropriate. The chain is only one part of the load path.

Indoor and outdoor performance

The label says indoor/outdoor, and my covered porch test supports that. After a few damp mornings and temperature swings, I didn’t see any early signs of corrosion or finish lifting. The textured coating seems to do a good job of hiding minor scuffs from installation.

For fully exposed coastal environments, I’d still opt for stainless or hot-dipped galvanized chain with a bronze-compatible finish if longevity is paramount. But for covered outdoor locations, breezeways, and porches, this chain is a practical, good-looking solution.

Aesthetics and compatibility

If you’re building a cohesive look across a home with oil-rubbed bronze hardware, this chain blends in seamlessly. The color lands in that sweet spot between too-dark-almost-black and overly coppery; it complements ORB canopies, door hardware, and cabinet pulls without drawing attention away from the fixture itself.

The link proportions are balanced—neither dainty nor bulky—and the 10-foot length makes it easier to create elegant swags without splicing mismatched segments. On my foyer install, the gentle loop of chain adds a bit of softness to the ceiling line, which can feel stark on tall walls.

What I’d change

• Welded versus unwelded: While I appreciate the ease of installation with unwelded links, welded links offer higher security for very heavy fixtures or in high-traffic areas where vibration is common. Including one matching welded quick link in the box would be a nice touch.
• Tool marks: The finish is durable, but it’s still possible to mar it with bare metal pliers. Wrapping jaws, using soft-jaw pliers, or adding a cloth layer prevents this—but if you’re new to working with chain, it’s easy to learn the hard way. A quick tip insert or QR video from the manufacturer would help first-timers.
• No extras: This is chain only—no canopy loop, S-hooks, or connectors included. That’s fine for pros, but DIYers should plan a small accessories run.

Tips for a clean install

• Pre-plan the drop and swag. Hang the fixture temporarily with painter’s tape at the intended height, count the required links, then cut.
• Open links with a twist, not a pry. It preserves the oval shape and closes more tightly.
• Tape your pliers or use soft jaws to protect the finish.
• Use one matching quick link at the canopy or fixture for easier removal later.
• If you’re mixing finishes, bring a link to the fixture for a side-by-side check before committing.

Warranty and value

The chain comes with a 1-year limited warranty, which is standard for lighting accessories and appropriate for a non-electrical component. In terms of value, the 10-foot length makes it cost-effective compared to piecing together shorter, per-foot options, and the build quality feels a tier above the lighter, decorative-only chains you’ll often find in big-box blister packs.

Who it’s for

• Homeowners and DIYers upgrading pendants, chandeliers, or lanterns who want a dependable, oil-rubbed bronze match.
• Pros who need a consistent, strong chain for residential installs without chasing specialty suppliers for every job.
• Anyone planning a swag or extra-long drop where 10 feet gives welcome flexibility.

Final take

The Progress accessory chain does the simple things right: it’s strong for its class, easy to work with, and finished in an attractive, durable oil-rubbed bronze that plays well with a wide range of fixtures. The non-welded links make cutting and adjustment straightforward, and the 10-foot length covers most scenarios with room to spare.

Recommendation: I recommend this chain for most indoor and covered-outdoor lighting applications where you need a reliable, good-looking oil-rubbed bronze chain. It’s sturdy enough for substantial residential fixtures, installs cleanly with basic tools, and the finish quality is a notch above common alternatives. If you’re hanging exceptionally heavy fixtures or working in harsh coastal conditions, consider welded or marine-grade options; otherwise, this chain is an easy, confidence-inspiring choice.