Honeydak 8 Pieces Metal Bottle Stopper Blank Stainless Steel Wine Bottle Stopper Kit Reusable Wine Saver Corks Hardware for Wedding Party Bar Turning

I picked up the Honeydak stoppers to stock my turning bench and make a batch of wine and soda toppers for gifts and a weekend market. It’s an eight-pack of metal blanks with a threaded connection for your custom handle, sized at roughly 0.79 x 3 inches. On paper, this checks the right boxes: compact, reusable, and sold in both silver and black finishes. After building and using a half-dozen, here’s how they actually perform.

What’s in the kit and first impressions

The kit I received included:
- 8 metal stopper bodies with silicone-style sealing rings
- M8 x 1.25 hardware for attaching a custom handle (thread size is important if you plan to use inserts or tap your own threads)
- A mix of silver and black finishes

The parts arrived clean and undamaged. The bodies are lighter than the solid stainless stoppers I typically use. The light weight is a double-edged sword: nice for keeping a finished topper from feeling bottom-heavy, but it can make top-heavy handles feel a bit wobbly if you go tall or use dense hardwoods.

Fit and finish are serviceable for the price tier. The sealing rings were seated evenly on all eight, and the threads were clean enough to take an insert or bolt without fuss.

Build quality and materials

The manufacturer lists these as stainless, but the surface behaves like a plated finish rather than solid stainless. On one silver unit I buffed a scratch out and could see a slight change in hue at the edge of the scratch—consistent with a plated layer. Practically speaking, that means:
- Hand wash and dry immediately.
- Don’t leave them soaking in acidic wine or rinses.
- Avoid abrasive pads that can mar the finish.

The sealing rings are the star of the show. They’re soft enough to compress smoothly and didn’t crack or deform through a few weeks of on-and-off use. The taper is fairly standard and aligns with most 750 ml bottles I tried.

Setup and compatibility

The thread spec is M8 x 1.25, which isn’t universal in the turning world where 3/8"-16 is also common. If you already stock M8 inserts, you’re set. If not, plan on picking up:
- M8 x 1.25 threaded inserts for wood (I used brass inserts in maple, walnut, and resin hybrids)
- Or tap M8 x 1.25 directly into a dense wood block with thin CA or epoxy reinforcement

My build workflow:
1. Turn a 1" x 1" blank into the handle shape.
2. Drill a pilot hole sized for the insert’s outer thread.
3. Spin in the M8 insert with a driver and a dab of epoxy.
4. Thread the handle onto the stopper, add a drop of removable threadlocker, and snug it—do not over-tighten.

The “don’t over-tighten” note in the instructions is important. If you crank down on the handle, the sealing rings can bottom out more aggressively and reduce compliance. Finger-tight plus a nudge is enough.

Sealing performance

I tested the stoppers on:
- Standard Bordeaux and Burgundy-style wine bottles
- Several domestic craft beer bottles
- A couple of soda bottles

On most standard wine bottles, the seal was strong and consistent. I stored a half bottle on its side in the fridge overnight—no leaks. Carbonated bottles are a bit more variable by design; these will hold fizz decently for a day, but they’re not pressure-rated closures, so I treat them as short-term savers rather than long-term carbonation keepers.

Bottle-to-bottle fit varies. On a few narrower-necked bottles, I had to seat the stopper a little deeper to engage the second ring, and one stubby beer bottle never felt perfect. For everyday wine bottles, though, I didn’t run into meaningful issues.

Ergonomics and size

The 0.79 x 3-inch size is compact and easy to pocket, and the taper grips well without requiring a big push. If your handle is tall or top-heavy, the light stopper body can make the assembly feel slightly tip-prone on the counter; that’s mostly a design choice on the handle rather than a deal-breaker with the hardware.

My sweet spot was a handle about 1.25 to 1.5 inches in diameter and 2.25 to 2.75 inches tall. That size keeps the overall balance good and gives enough surface area to control insertion and removal without reefing on the bottle neck.

Durability and care

With hand washing and immediate drying, the stoppers held up fine through several weeks. I did a stress test with a black-finish unit and noticed small scuffs developing faster than on brushed stainless stoppers I own. That lines up with a coated or plated finish. If you plan to sell toppers or use them in a bar setting:
- Avoid dishwashers.
- Rinse and dry after service.
- Store dry.
- Consider the silver over black if you want scuffs to be less visible.

I didn’t experience any corrosion in normal use, but after soaking a test unit in acidic wine overnight (not recommended in practice), I did see some surface dulling. Again, treat these like plated hardware and they’ll last longer.

DIY friendliness

From a maker’s standpoint, these are genuinely easy to work with:
- The M8 x 1.25 thread is smooth, and inserts held solidly in walnut, maple, and stabilized burl.
- Thread engagement is long enough to feel secure, so there’s no wiggle in the handle.
- If you’re batching products for a craft fair, an eight-pack is cost-efficient, and the compact size makes them easy to transport and display.

One small tip: add a thin rubber or nylon washer between the handle and the stopper shoulder if you want a perfectly tight “clocking” of the handle orientation without overtightening.

Who they’re for

• Hobbyist turners who want a budget-friendly blank for gifts and one-off projects
• Makers selling at shows who need a low-cost kit to pair with attractive handles
• Home users who want an inexpensive set of stoppers for casual wine saving

Who should look elsewhere:
- Restaurants and bars that need heavy-duty, true stainless stoppers that tolerate dishwashers and acidic environments
- Makers selling premium toppers where long-term finish integrity is non-negotiable

Pros and cons

Pros:
- Affordable eight-pack, good value for batching
- Easy to attach to custom handles; M8 x 1.25 is predictable and accessible
- Seals well on most standard wine bottles
- Compact, comfortable size

Cons:
- Finish behaves like plating; requires gentle care and hand washing
- Lighter than solid stainless alternatives; balance depends on handle design
- Fit can be inconsistent on atypical bottle necks

Practical care tips

• Hand wash only; dry immediately
• Lightly lubricate O-rings with food-safe silicone grease if they start to drag
• Don’t overtighten the handle on the stopper
• If selling, include a care card: “Hand wash, dry promptly, avoid dishwasher”

Recommendation

I recommend the Honeydak stopper kit for hobbyists and makers who prioritize value and ease of use over long-term, commercial-grade durability. The sealing performance is dependable on most standard bottles, the M8 x 1.25 threading is straightforward for DIY builds, and the eight-pack pricing makes it attractive for gifts and craft sales. Just treat the finish with care—hand wash, dry promptly, and avoid abrasive cleaning—and you’ll get solid utility without overspending. If you need true, heavy stainless stoppers that shrug off dishwashers and hard bar service, step up to a more premium kit; for everything else, these strike a practical balance.