Features
- LENGHT: Use this versatile 5ft (1.5m) power cable to reach your gear & deliver safe reliable power Perfect for Monitors computers and other gadgets
- STURDY AND FLEXIBLE: Features a fully molded design that provides maximum durability and long life.
- PLUG: Replaces lost or worn-out power cords Universal design works with your PC monitor TV printer or other devices with a 3 pin power connection
- DURABILITY: Heavy-duty 18 AWG gauge cord is fully molded for maximum durability
Specifications
Color | Black |
Size | 5-feet |
Unit Count | 1 |
This 5 ft (1.5 m) 3-prong AC power cord delivers up to 10 A at 125 V for electronics such as computers, monitors, TVs, printers and other devices with a standard 3‑pin power inlet. The 18 AWG cable is fully molded for durability and flexibility to replace worn or missing power cords.
Lord Computer Standard 5ft (1.5m) 10 Amps 125 Volts Black 3 Prong AC Power Cord Cable for Electronics, TV, Computer, Printer, Radio, Monitor, Samsung, Dell, Vizio, LG, Asus, Laptop and More Review
A straightforward, well-made 5‑ft power cord that does the basics right
In my studio and home office, power cords multiply fast. Between monitors, a desktop tower, a small TV I use as a preview screen, and a printer, I’m constantly shuffling cables—replacing ones that have gone missing or adding new runs as gear moves around. I brought in the Lord Computer 5‑ft power cord to see if a no‑frills, inexpensive option could stand up to daily use and the occasional gig bag toss. After several weeks, it’s proven to be the sort of cable you forget about once it’s plugged in—which is exactly what I want from a power cord.
Design and build quality
This is a standard three‑prong AC cable: NEMA 5‑15 plug on one end (the typical North American wall plug) and the familiar three‑pin IEC device connector on the other. The jacket is black, the length is 5 feet (1.5 m), and the conductor is 18 AWG, rated to 10 A at 125 V. Both ends are fully molded with decent strain relief. Nothing fancy, no lighted ends or right‑angle tricks—just a clean, robust build.
What stood out first was the flexibility. Some budget cords arrive stiff with a memory from packaging that takes days to relax. This one uncoiled easily and laid flat without fighting me behind a desk or in a rack. The jacket feels slightly softer than the average generic cord, which pays off when you’re routing around table legs or lacing through a cable channel. The molded ends feel solid with no flashing or sloppy seams, and the device‑side connector seats with a snug, positive click.
In hand, the 18 AWG conductors give the cable a medium thickness—substantial enough to inspire confidence without being bulky. For the type of gear this cord targets—monitors, small to mid‑tower PCs, TVs, printers, audio gear—18 AWG is the right balance of capacity and manageability.
Fit and compatibility
I tested the cord with a 27‑inch computer monitor, a mid‑tower PC, a 40‑inch TV, and a laser printer. It also saw a weekend in my live‑sound kit powering a PA speaker from a rack power conditioner. In each case, the device‑end connector seated cleanly and stayed put; there was no wobble or tendency to back out when I tugged cables around during setup. The wall plug slid into a variety of outlets and power strips with appropriate tension.
One of my cords arrived with the plug blades slightly compressed, a not‑uncommon quirk from tight packaging. A gentle wiggle into a robust outlet straightened it out, and it’s been fine since. If you run into that, avoid bending blades by hand; a snug outlet will do the work safely.
If you’re outfitting a mix of devices, it’s worth confirming you actually need the standard IEC three‑pin on the device side; some laptops and compact gear use a two‑pin “figure‑8” or the cloverleaf (C5) connector. For desktop gear, monitors, TVs, and many printers, this standard three‑pin is the right one.
Performance and safety considerations
There’s not a lot of mystery with a power cord, but there are a few boxes I always check:
- Current capacity: At 10 A and 125 V, this cord supports up to roughly 1,250 W. That comfortably covers most monitors, TVs, small to midsize PCs, and powered speakers. For a high‑draw device like a large laser printer or a workstation that regularly pulls near 10 A, I’d step up to a heavier 16 or 14 AWG cable as a margin of safety and to reduce voltage drop under sustained load.
- Heat: Even after hours powering my printer and a desktop under load, the cable remained cool along its length and at both connectors. That’s what I want to see—no softening or warmth at the molded ends.
- Electrical noise: I didn’t encounter any hum or interference attributable to the cord in my audio setup. That’s expected, but still worth noting when coiling AC alongside signal cables in a rack.
- Retention: Both ends were confidence‑inspiring. The IEC side grips as it should; the wall plug isn’t so tight that it’s hard to remove, but it isn’t sloppy either.
If you’re building out a power‑dense rack or running long distances, keep cable gauge and length in mind. At 5 feet, the voltage drop on 18 AWG is negligible for typical loads. For longer runs or borderline loads, a thicker gauge can be a better choice.
Everyday use
Most of my use cases are boring—and that’s the point. Behind a dual‑monitor setup, 5 feet is long enough to reach from a floor‑level power strip to the panel without coiling excess. It’s also a comfortable length from a rack power conditioner to gear on the same or adjacent rack spaces. For a TV on a low stand, it reached a nearby surge suppressor cleanly.
The cable’s flexibility is genuinely helpful when you’re threading through furniture. It doesn’t fight bends, and it doesn’t spring back in a way that nudges devices or pulls on ports. The molded strain relief isn’t oversized, so it doesn’t block adjacent outlets on compact power strips. I also appreciated that it packs small—easy to carry a couple as spares in a tech bag.
If I have a consistent nit, it’s simply that 5 feet won’t cover every scenario. When gear lives farther from a wall or floor strip—say, a standing desk with a moving cable tray or a TV mounted higher on a wall—you’ll either need to reposition your power source or use a longer cable. That’s not a flaw of this cord so much as a reminder to measure your run before you buy.
Durability and handling
After repeated plugs and unplugs, both ends still look and feel new—no stress whitening and no looseness. The jacket resists scuffs and wipes clean. I did a couple of tighter coils than I’d usually recommend, and the cable didn’t kink or take on permanent twists. For a molded, budget‑friendly cord, it feels a touch sturdier than the anonymous generics that ship with some devices.
I haven’t stress‑tested it in extreme conditions (heat, cold, under‑stage grit), but for office, studio, and light live‑sound use, it’s holding up as expected.
Who it’s for—and who should look elsewhere
- Great fit if: You need a reliable, flexible 5‑ft replacement or spare for monitors, PCs, TVs, printers, or powered speakers; you value a snug device‑side fit and molded durability; and your devices draw comfortably under 10 A at 125 V.
- Look elsewhere if: Your setup is power‑hungry (large laser printers, heavy workstation loads) or involves longer runs—opt for a thicker gauge and/or longer cable. Also, if your device uses a different connector (two‑pin figure‑8 or cloverleaf), this isn’t the right style.
Practical tips
- Map your power path before ordering. Five feet is versatile, but not universal.
- Check your device inlet. This cord mates with the standard three‑pin IEC used by most desktop‑class gear.
- For mobile setups, label both ends. It saves time when multiple black cords live in the same case.
- Avoid sharp bends right at the molded ends to maximize longevity.
Bottom line
The Lord Computer 5‑ft power cord does exactly what it should: deliver reliable power with a flexible jacket, snug connections, and sensible strain relief, all without drawing attention to itself. It’s easy to route, reassuringly solid at both ends, and appropriately rated for the vast majority of home office, studio, and light AV use. I appreciate that it stays cool, sits flat, and doesn’t hog outlet space—small details that make daily cable management easier.
Recommendation: I recommend this cord as a dependable, no‑nonsense replacement or spare for standard three‑pin IEC devices within the 10 A/125 V envelope. It’s a smart pick if you want something that feels better than throw‑in cables without paying a premium. If your gear regularly pushes the upper limits of current draw or you need longer runs, choose a heavier gauge or longer length; otherwise, this 5‑footer is an easy win.
Project Ideas
Business
Replacement Cord Retail Pack
Package and sell these universal 3-prong power cords as replacement parts for monitors, printers, TVs and PCs. Offer them in multi-packs and branded value packs for home offices and small businesses. Emphasize compatibility, 18 AWG durability and compliance with electrical safety standards.
Etsy Lamp-Making Kits
Assemble and sell DIY lamp kits that include the 5ft molded power cord, socket with strain relief, mounting hardware, and a simple shade/base plan. Market them to makers and crafters as easy upcycle projects. Provide clear assembly instructions and safety guidance; include only certified electrical components.
IT Supply & Cord Management Service
Offer a B2B service supplying labeled, tested replacement power cords to offices, cafes and event venues. Combine sales with onsite cable organization, labeling, and inventory stocking so clients never have mismatched or missing cords during setup.
Emergency Tech Repair Kits
Create compact kits for event tech crews or coworking spaces that include several 5ft power cords, adapters, and cable ties. Sell them as 'emergency repair' bundles for AV setups, pop-up shops and tradeshow booths where quick replacements are critical.
Branded Promo Cables
Customize and sell the cords as promotional giveaways for tech companies, schools or conferences. Offer printed sleeves, color-coded clips, or small branded tags attached to the molded plug. Market them as practical swag that gets repeated use and brand exposure.
Creative
Industrial Table Lamp Kit
Use the 5ft molded power cord as the mains feed for a handmade table lamp with an exposed-bulb, Edison-style aesthetic. Pair the cord with a ceramic or metal socket, a small switch or inline dimmer, and a custom base (wood, concrete or metal). Keep the cord visible and neatly coiled or braided along the lamp arm for an industrial look. (Emphasize using proper sockets, strain relief, and certified components for safety.)
Cable-Wrapped Shelf Trim
Create floating shelves or picture frames with the power cord incorporated as decorative trim. Wrap the cord tightly around shelf edges or use it as a hanging element to give a tech-industrial accent. The cord provides texture and contrast against wood or painted surfaces without needing to be live (cap the ends or use as non-powered trim if you prefer).
Tech Sculpture — 'Tangled Wire' Wall Art
Build a wall-mounted sculpture using several power cords woven, knotted, or looped over a wooden or metal backing. Combine cords with other reclaimed electronics parts (grommets, plugs, connectors) for a modern, recycled-media piece. Seal and mount the sculpture so cords stay fixed and safe for display.
Macramé-Style Plant Hanger (Indoor Only)
Repurpose the cord as a strong, flexible material for a sturdy indoor plant hanger in a chunky macramé style. Use only the insulated outer jacket, ensure the cord is disconnected from any mains wiring, and avoid using cords that will be connected to power while woven into hanging planters. This yields an industrial, durable hanger for heavier pots.