Black & Decker 19in. 2in1 Stackable Storage Caddy and Organizer

Why I picked up this 2‑in‑1 caddy

I’ve been trying to tame a rotating mix of craft supplies, hobby electronics parts, and light DIY odds and ends. I wanted something I could grab in one hand, take to the kitchen table or garage bench, and put away without leaving a breadcrumb trail of bits behind. That’s exactly why I tried this stackable caddy-and-organizer combo. It’s a two-piece setup: an open caddy on top for bulkier tools and a lower organizer with a clear lid, two flip-top sections, and adjustable dividers for all the small stuff.

After several weeks using it for craft projects and quick fixes around the house, I’ve formed a clear picture of where it shines—and where it could be better.

Setup and first impressions

Out of the box, the stackable caddy feels sturdier than a typical craft bin. The plastics are thick enough to resist flex without being overly heavy; empty, the whole unit is about 7 pounds, so it has some heft. The side latches clicked with a satisfying snap and there’s no slop in the connection between the top and bottom sections. Both pieces have integrated handles, and when locked together, the top handle bears the load confidently.

The footprint is roughly 20 inches long—large enough to be practical but still easy to stash on a shelf. The bottom organizer’s transparent lid is a nice touch: I can quickly scan for heat-shrink, micro screws, or beads without opening anything.

Storage layout: big tools up top, small parts below

The layout is intuitive. The top caddy is open and roomy; I load it with a rotary tool, wood burner, a compact soldering iron, glue gun, and various pliers. There’s no lid on the caddy, so I treat it like a tote I can drop tools into while I work. The lower organizer is the precision side of the system. It’s split into two flip-top sections under a single transparent lid, with removable dividers I can reposition to create narrow channels for bits or wider bays for fittings and couplers.

A few practical notes:
- The dividers are easy to reconfigure. They seat securely, but—as with most plastic divider systems—very small hardware can creep under if you jostle it. For tiny screws or seed beads, I use mini bags inside the compartments.
- The flip-top sections open independently, which reduces the chance of a cascade of parts when I only need one side.
- The clear lid closes flush, and the front latches keep things sealed during transport. I carried it sideways and didn’t lose a single washer.

On the bench and on the go

My typical use is “stack and go”: lock the organizer to the caddy, grab the handle, and head to wherever I’m working. The side latches have held up well to repeated cycles. Once latched, the two halves behave like a single box—no squeaks, no wobble. I appreciate that I can also detach the organizer and take just the bottom when I’m organizing hardware drawers. Conversely, during an electronics repair, I took only the top caddy with the tools I needed and left the parts tray on the shelf.

The portability is its sweet spot. It encourages me to pack a complete kit for a task—solder and heat-shrink below, iron and pliers up top; or beads and findings below, stringing tools and adhesive up top—so I’m not constantly walking back and forth.

Build quality and durability

For a consumer-grade organizer, the build feels confident. The hinges on the flip-tops are molded well, and the lid sits square. The side latches are thick enough that I’m not babying them. I set the unit on a concrete floor, slid it under a bench a dozen times, and it shows only superficial scuffs. There’s no weather sealing, so I wouldn’t treat it as a jobsite box in the rain, but for indoor crafts and shop use it’s more than adequate.

Weight distribution is sensible. With heavy items up top, the center of mass stays close to the handle, and the stacked system doesn’t torque your wrist. Just be mindful not to overload the lower compartments with dense hardware—let the top caddy carry the heavy stuff to keep the flip-tops stress-free.

Modularity and expandability

One of the better aspects is its stackable, locking design. The organizer locks to the caddy with side latches, and you can attach additional compatible organizers to build a taller stack. I tried adding an extra organizer, and the system handled it fine; the latches engaged cleanly and the stack remained secure when lifted by the top handle. For growing collections—beads, fasteners, small electronics modules—being able to expand vertically is a real advantage.

If you plan to expand, a quick tip: keep each tray theme-based (e.g., “soldering,” “Dremel accessories,” “beading”). Label the front edges; it makes grabbing the right stack faster.

Usability details that matter

• Visibility: The transparent bottom lid is more useful than I expected. I can visually confirm whether a part is in stock without unstacking.
• Access: Flip-tops let me open one section without exposing the other. That’s great on a cluttered table.
• Handles: Both sections have handles, and the top carry handle feels secure even with a fully loaded stack.
• Dividers: They’re plentiful and easy to rearrange. I’d call the compartment granularity “fine enough” for most craft hardware but not ideal for ultra-tiny items unless bagged.
• Latches: Robust and positive. They’re a little bulky, which is the trade-off for durability, and they can catch on fabric if you brush past them.

Limitations and small gripes

No organizer is perfect, and a few things are worth noting:
- The open-top caddy is incredibly convenient, but because it lacks a lid, you’ll want to lock it to the lower organizer for transport to avoid anything bouncing out. That’s the intended workflow, but it’s worth remembering if you’re used to lidded totes.
- The divider plastic is solid but not rigid enough to prevent the tiniest items from sliding underneath during a hard shake. It’s common to this category; the fix is using small internal bags for micro parts.
- Price-wise, it’s a bit higher than a basic small-parts case. The upgrade is in the two-in-one design and the ability to expand. Whether that premium makes sense depends on how much you value the modular stack and the caddy format.

Who it’s for

This 2‑in‑1 caddy is a great fit if you:
- Need a single grab-and-go kit for crafts, hobby electronics, or light DIY.
- Want clear visibility and quick access to small parts without opening multiple boxes.
- Expect your collection to grow and value a lockable stack that scales with you.

If you primarily need weatherproofing or jobsite-grade toughness, there are heavier-duty boxes with gaskets and metal latches. If you only want a fixed small-parts case and never carry tools alongside, a simple compartment organizer will be cheaper and smaller. But for mixed workflows—tools plus consumables—the format here is efficient.

Practical tips from use

• Assign the lower organizer to consumables and small parts, and keep heavy tools in the top caddy. It preserves the flip-top mechanism and makes the stack easier to carry.
• Use painter’s tape labels on the inside of the clear lid. You’ll know what’s where before you open it.
• Keep a few resealable mini bags in one compartment for tiny hardware that could sneak past dividers.
• If you add more trays, put the heaviest one at the bottom of the stack for stability.

The bottom line

I’ve come to appreciate this stackable caddy for what it is: a thoughtfully designed, portable system that keeps tools and small parts together without fuss. The latches are trustworthy, the visibility is excellent, and the modularity means it won’t outgrow your needs. It’s not a ruggedized contractor box, and it’s not the cheapest way to corral small parts, but as a flexible, everyday organizer for craft and home projects, it hits the mark.

Recommendation: I recommend this tool. The combination of a roomy top caddy, a configurable small-parts organizer, and secure stacking makes it genuinely useful for anyone juggling tools and tiny components. It streamlines setup and cleanup, travels well around the house or workshop, and can expand with additional trays as your projects evolve.