GORILLA All Weather Duct Tape, Black, 1.88" x 25 yd (Pack of 1) - UV and Temperature Resistant Waterproof Tape for Outdoor Repairs

Why this tape lives in my outdoor kit

There’s always a roll of black Gorilla All Weather Tape in my truck, because it covers a category of jobs that ordinary duct tape can’t: fixes that live outside and take a beating from sun, rain, heat, and cold. Over the last year I’ve used it to patch a grill cover that wore through on a brick corner, secure a loose piece of car trim, and seal a stubborn gap around a portable AC window kit. It hasn’t been perfect in every scenario, but when the environment is the enemy, this tape has earned its keep.

Build and specs that matter

• Size and color: 1.88 inches wide by 25 yards, black.
• Adhesive: pressure-sensitive and permanent; not gummy to the touch once unrolled but bonds aggressively with firm pressure.
• Shell: thick, weather-resistant backing that resists UV, heat, cold, and moisture.
• Temperature: service range 0°F to 200°F; apply above 40°F.

The thicker backing is the first thing you notice. It’s stiffer than standard duct tape, which is exactly what you want for patching fabrics, tarps, and covers—it bridges small holes without sinking into them, and it shrugs off abrasion better than lighter tapes. The black finish blends on most automotive plastics and outdoor gear and hasn’t chalked or cracked on me, even after full summer sun.

In use: where it shines

• Grill cover patch: I cleaned the area with isopropyl alcohol, laid the cover on a flat surface, and applied a patch inside and out with rounded corners. I burnished it hard with a plastic roller. That patched cover has been through thunderstorms and 100°F days and still looks tidy. No lifting edges, no white fade lines.
• Car trim: A section of lower body molding that likes to sag stayed put after I used short strips as reinforcement behind the panel, paired with a couple of discreet fasteners. The combination is key—tape alone will fight gravity for a while, but when it’s asked to hold weight plus road spray and heat, a mechanical assist helps.
• AC window gap: This tape finally stood up to the radiant heat pouring off a window unit’s exhaust where other tapes turned gooey and failed. No curling, no droop.

Across all three, prep and pressure made the difference. This adhesive is engineered to flow and grab when you press it down; if you just lay it softly, you won’t see the best bond.

Adhesion and removal

Let’s be clear: this is a permanent tape. It will remove, but not cleanly. On painted metal and finished wood, I could peel it with steady force, but it left a black adhesive footprint that required mineral spirits or citrus adhesive remover and patience to clean up. On porous surfaces, the residue keys into the fibers and cleanup gets messier.

If you’re taping for a week and want a residue-free parting, this isn’t the product. Use painter’s tape or a lighter, general-purpose duct tape. If you’re sealing, patching, or reinforcing for the long haul and can accept adhesive cleanup later, this is squarely in its lane.

Handling quirks

• Cutting: Don’t try to tear it with your hands. It will stretch and string. Use scissors or a sharp utility knife and a cutting board. If you must hand-tear, pinch and start a nick at the edge, then rip quickly—still not my preference.
• Edge control: Round the corners of patches; sharp corners lift first. Overlap seams by at least an inch.
• Surface prep: Clean with isopropyl alcohol and let dry. Dust, chalk, and silicone residue will sabotage the bond. If it’s cold, warm the tape and the surface to room temperature before applying.
• Pressure: The bond grows stronger with firm, even pressure. A roller or the back of a spoon works better than fingers.
• Storage: Keep the roll bagged or boxed to prevent the exposed edges from collecting dirt.

Once you adapt to the thicker, stiffer feel, application becomes predictable. The “low-tack to the touch, high-bond under pressure” behavior is real—handy when you’re positioning a piece, but don’t mistake it for removability.

Weather performance

This is where the tape earns its name. I’ve had patches sit through triple-digit heat, direct sun, heavy rain, and nights below freezing with no cracking or chalking. The backing remains pliable; it doesn’t turn brittle like generic duct tape in cold, and it doesn’t slump in heat the way softer adhesives do.

There are limits. Continuous submersion or pressurized water can force its way under an edge, and dynamic edges on vehicles—like door seals or sunroof perimeters that flex and get blasted by car wash jets—are not guaranteed. You can get a temporary seal, but if water is being driven under pressure, expect to monitor and reapply. Also, many automotive weatherstrips are silicone-based, and silicone and pressure-sensitive adhesives don’t get along.

What it’s not for

• Pressurized plumbing repairs, safety-critical fixes, or structural load-bearing tasks.
• Clean-removal masking or short-term jobs on finished surfaces.
• Dusty, fibrous substrates (raw cardboard, crumbling drywall) without proper prep.

If your priority is quick application and easy removal, this is the wrong tool. If you need an outdoor patch or reinforcement that can live in the elements, this is the right tier of tape.

Practical tips and small upgrades

• Double-sided patches: For fabrics and covers, apply a patch inside and outside the material for a stronger sandwich.
• Prime porous surfaces: A thin smear of contact adhesive allowed to tack up can help on rough wood or frayed fabrics, but test first.
• Keep cleanup in mind: Mineral spirits or a citrus-based remover softens residue; follow with soapy water. On delicate finishes, test in an inconspicuous spot.
• Combine with fasteners: On vehicles and equipment, use a short screw or clip where hidden; the tape acts like a weatherproof gasket and vibration damper.

These habits take a tape job from “good enough” to “still holding six months later.”

Value

You pay more for all-weather formulations, and the roll length (25 yards) is shorter than some standard tapes. But if I count the number of re-do’s I’ve avoided—especially outdoors—the net cost is easy to justify. Regular duct tape is cheaper per yard but not per outcome when sun and heat are involved.

Alternatives and comparisons

Compared with standard silver duct tape, this Gorilla All Weather Tape is thicker, more UV-stable, and far more heat tolerant. Compared with clear “patch” tapes and butyl products, it’s easier to handle, less oozy, and more general-purpose, though butyl will outperform it on flashing and truly watertight seams. If you need transparency or underwater adhesion, look elsewhere. If you need a rugged, black, weatherproof bandage for gear and vehicles, this hits the sweet spot.

Bottom line

Gorilla All Weather Tape isn’t magic, but it’s reliably tough. It excels at permanent outdoor patches, reinforcement, and sealing where ordinary duct tape fails—sun, heat, cold, and moisture don’t scare it. It demands good prep and decisive application, it’s best cut with a blade, and removal will leave a mess. Those tradeoffs are inherent to a strong, permanent adhesive system.

Recommendation: I recommend this tape for anyone who needs durable, weather-resistant repairs on grills, tarps, covers, automotive trim, garden equipment, and around window/door installations. It’s the right choice when failure in heat or sunlight would be more expensive than the tape itself. If your use case prioritizes clean removal or truly temporary fixes, skip it and use a lighter-duty tape; otherwise, this belongs in your kit.