Black & Decker 18 In. Stand Fan With Remote, White

First impressions and setup

Out of the box, this 18-inch Black+Decker stand fan feels familiar in all the right ways: a straightforward, no-fuss pedestal design with a wide stance and an 18-inch blade behind a tight grill. Assembly was quick and tool-free for me—snap the grills together, slide on the blade and cap, seat the head on the pole, and tighten the height collar. Ten minutes later, it was upright and running. The overall footprint is roughly a 16.5-inch square, so it tucks into corners without dominating a room.

The fan stands tall—about chest height for me at its maximum—so getting airflow above a couch back or across a bed is easy. Tilt adjustment is firm, and the oscillation mechanism engages with the typical push-pull knob on the motor housing.

Controls and everyday usability

This is a simple fan with the right everyday features: three speed settings, oscillation, a shut-off timer, and a handheld remote with on-board storage. The front panel buttons are clearly labeled and have a tactile click. The remote covers the basics—power, speed, and timer—and slots neatly into a holster on the fan so it doesn’t wander off.

One limitation: the oscillation toggle is manual on the fan head. If you like to stop the sweep from bed or the couch, you can’t do that from the remote. It’s not uncommon at this price, but worth noting if you frequently switch between a directed stream and a room sweep.

The shut-off timer is exactly what I want in a bedroom or office—set it and forget it. It’s handy for falling asleep without running the fan all night or for timed breaks during the day.

Airflow and coverage

On low, the airflow is gentle and consistent—ideal for sleeping or a home office where you want circulation without papers doing cartwheels. Medium gives a noticeable step up and is where I spent most of my time; it kept a 12x15 room comfortable in the afternoons, especially with oscillation on. High is a push of air you can feel from across the room, though it’s not a “wind tunnel.” If your goal is to move massive air in a garage or to compete with a summer heat wave in a big open living space, a high-velocity floor fan or a fan with a more aggressive blade profile would be a better fit.

The oscillation range is broad enough to cover a seating area or a queen bed without blasting anyone directly for too long. If you prefer a constant stream, the head tilt and height adjustments make it easy to dial in a precise target.

Noise and vibration

Noise is where this fan is largely well-behaved, with a caveat. On low, it’s whispery with a soft whoosh that blends into background noise—excellent for sleeping. Medium introduces steady white noise but still keeps voices and TV intelligible. On high, the motor and airflow are clearly audible, as you’d expect, and this is where any assembly imperfection or unlevel surface can show up as a mild vibration.

If you do encounter wobble at higher speeds, a few checks usually solve it:
- Reseat the blade and front cap so they’re fully tightened and centered.
- Confirm the grill ring is evenly snapped all the way around.
- Make sure the pole sections are snug and seated straight.
- Place the base on a level, hard surface.

After tightening everything, my unit ran smoothly on all speeds. The weight (about 12 lb) helps, but like most pedestal fans, it’s sensitive to balance and setup at the top speed.

Build quality and design choices

Materials are what you’d expect for a modern pedestal fan: plastic blade and housing, metal pole, and a sturdy base. The blade is durable and easy to clean; I recommend a quick dust wipe weekly to keep airflow efficient. The grill spacing is tight enough for safety, and the ETL certification is a reassuring box checked for home use.

Nothing here is flashy, and that’s fine. The choices are practical. The remote storage on the column is more useful than it looks—no hunting in couch cushions. The cord is standard length for a fan this size and exits the motor housing cleanly, staying out of the way when tilting or oscillating.

Remote performance

The remote is small, responsive, and covers day-to-day use without overcomplicating things. I didn’t need precise line-of-sight; it worked reliably from across the room as long as I was generally facing the fan. Batteries aren’t included, so plan ahead.

As mentioned, you can’t toggle oscillation from the remote. If you mostly leave oscillation on or off, that’s a non-issue. If you frequently switch modes while seated, it will feel like a miss.

Maintenance and cleaning

Cleaning is straightforward. Dust will collect on the grills and leading edges of the blades, especially if you run the fan daily. The front grill is removable, so a periodic clean with a damp cloth restores performance and keeps noise down. Check the blade and cap tightness when you reassemble; it’s the easiest way to prevent vibration creep over time.

Safety and warranty

The ETL safety certification is good to see, and the grill spacing is appropriate for a household fan. The one-year limited warranty is standard, and given the simplicity of the mechanics, most issues will show up early if at all. As with any tall fan, keep it out of high-traffic walkways to avoid bumps that could knock it off balance.

Where it excels

• Bedrooms and home offices: low-speed noise is very sleep- and work-friendly, and the timer is a great quality-of-life feature.
• Medium rooms: medium speed plus oscillation circulates air evenly without creating hot spots.
• Users who want simple controls and a reliable remote: no app, no pairing, no fuss.

Where it falls short

• Remote control of oscillation: if you often switch between fixed and sweeping airflow while seated, you’ll miss this.
• High-speed expectations: airflow is solid but not industrial; if you’re chasing high-velocity performance, you’ll want a different style of fan.
• Sensitivity to setup: like most pedestal fans, it needs careful assembly and a level surface for best results on high.

Value and alternatives

For a corded 18-inch pedestal with three speeds, oscillation, a shut-off timer, ETL certification, and a remote, this is a solid, mid-tier package. You can find cheaper fans with fewer features and pricier models with DC motors, more speeds, or remote oscillation control. This one lands in the practical middle: it does the essentials well enough to justify its spot in a bedroom or living area without demanding a premium.

The bottom line

I like this stand fan because it does the basics cleanly: easy setup, dependable airflow, quiet operation on low and medium, and a simple remote that covers everyday needs. The inability to toggle oscillation remotely is the one design choice that occasionally gets in the way, and high speed can reveal any assembly or balance issues. But once properly set up, it’s a capable, no-drama cooling solution for most indoor spaces.

Recommendation: I recommend this fan for bedrooms, home offices, and medium rooms where quiet, steady airflow and a simple timer matter more than maximum blast or remote-controlled oscillation. If you need high-velocity cooling or want full-featured remote control of every function, consider stepping up to a higher-end model. For most households, though, this strikes a good balance of performance, features, and everyday usability.