Scotch Felt Pads 162 PCS Beige, Felt Furniture Pads for Protecting Hardwood Floors, Round, Assorted Sizes Value Pack, Self-Stick design, Protecting from nicks, dents and scratches

Why I reached for these pads

Hard floors look great until chair legs, table feet, and plant stands start leaving their mark. I keep a steady supply of felt pads in the shop for that reason, and lately I’ve been using Scotch felt pads in the 162-piece assorted pack. After outfitting a kitchen set, a couple of end tables, a media console, and a freestanding shelf, I’ve got a clear take on where these pads shine and where they can come up short.

What you get and how they’re made

The pack is a straightforward, useful assortment of round felt discs in multiple diameters, all in a neutral beige. The felt is dense and reasonably thick—soft enough to cushion, firm enough to resist folding or shredding on the edges. Each pad has a peel-and-stick adhesive backing. Nothing exotic here, but the combination of felt density and adhesive quality is better than the bargain-bin options.

The color blends in well with light woods, painted legs, and most modern furniture. On dark-stained pieces the beige is visible if you look for it, but it’s low-profile once installed.

Setup and installation tips

Peel-and-stick is only as good as the surface you stick to. The difference between pads that last a year and pads that slide off in a week usually comes down to prep. Here’s what I’ve found works best:

• Clean the bottom of the legs thoroughly. Dust and floor-cleaner residue kill adhesion. I wipe with isopropyl alcohol and let it dry.
• If the leg bottom is rough, scuffed, or uneven, a few quick passes with fine sandpaper help the pad bond and sit flat.
• Match the pad diameter to the contact area. Too small and it will shear; too large and the edges can catch.
• Press firmly for 10–15 seconds to seat the adhesive. If possible, avoid dragging the furniture for a few hours to let the bond settle.

On irregular or non-round feet, the felt is easy to trim with scissors for a custom fit. I’ve also doubled up pads on a heavy bookshelf to add a bit more cushion; they stack cleanly without squirming.

Performance on hardwood, tile, laminate, and vinyl

On sealed hardwood and tile, the pads glide smoothly without leaving trails or gray marks. Chairs become noticeably quieter—no more scraping sounds—and I can pull a table out for cleaning without worrying about scuffs. On laminate and vinyl, the glide is even easier, which is great for sliding, though it means furniture can move a bit more freely on slick floors. If that’s a concern, you can step up to a slightly larger pad to increase friction or consider a rubber pad for pieces that shouldn’t budge.

The felt thickness is enough to keep grit from grinding between the furniture and the floor. After a couple of months under frequently used kitchen chairs, the pad surfaces showed expected polishing but no bald spots or edge fraying. I did pop the chairs up once to brush away any trapped grit—a good habit regardless of brand.

Adhesion and longevity

Adhesion is where Scotch typically sets itself apart. On clean, flat wood and metal feet, these pads have stayed put for months with daily use. The only times I’ve had a pad fail were on legs I rushed (read: didn’t clean well) or on a heavily textured, unfinished oak foot. In those cases, a quick re-prep solved the issue.

A few practical notes:
- High-traffic chairs see the most wear. Expect to replace those pads roughly every 6–12 months depending on use and floor texture.
- If you have angled or splayed chair legs, the shear forces are higher. Upsizing the pad one diameter helps, as does making sure the leg bottom is truly flat.
- For stubborn surfaces (raw wood, powder-coated metal with texture), a tiny dab of additional adhesive can extend life. Use sparingly to avoid residue later.

Removal has been simple. A plastic scraper or the edge of a putty knife lifts the pad, and any adhesive residue wipes up with a small amount of adhesive remover or mineral spirits. I haven’t had finish issues doing this on sealed wood or metal.

Size mix and everyday versatility

The assortment covers most household needs: small circles for lightweight items like lamp bases and ceramics; mid-size for dining chairs; larger rounds for sofas, consoles, and plant stands. It’s helpful to have extras on hand, not just for floors but also as quiet bumpers behind cabinet doors and drawers. I used a few of the small pads as door stops on built-ins to soften the close and prevent knobs from hitting the wall.

One thing to note: the pack is all round pads. If you’ve got square feet or unusually shaped bases, you’ll either trim a round or buy rectangular pads separately. Trimming works fine, but you’ll need sharp scissors for a clean edge.

Sliding vs. stability

These pads strike a good balance between easy sliding and staying put. On hardwood and tile, I can shift a six-drawer dresser a few inches solo without dragging, and the pads don’t bunch up. On low-friction floors, lightweight items like side tables can feel a little more mobile than you might expect; that’s a trade-off inherent to felt. If maximum grip is the goal, a rubber or silicone pad is a better match. For scratch prevention and smooth repositioning, felt wins.

Durability and compression

Felt compression is gradual and predictable here. Chairs that see daily use will compress the pads within the first week, then stabilize. If your furniture had a slight wobble before, felt can sometimes mask or slightly exacerbate it. In that scenario, mix pad sizes to level the piece, or add a second layer to the short leg. The felt’s density prevents it from mushrooming at the edges, which keeps things tidy and functional over time.

How they compare to generics

I’ve tried plenty of bargain felt pads. They usually look the same out of the package but fall down on adhesive strength and felt quality. Cheaper pads tend to shear off under chairs, leave gummy residue, or flatten unevenly. The Scotch pads cost more per pad, but I replace them less often and spend less time re-sticking. If you’re outfitting a whole house, that time savings is real.

What could be better

• A few rectangular or square options in the assortment would make the pack even more versatile.
• A primer wipe included in the pack would help first-time users get better adhesion.
• On very rough or unfinished wood, the adhesive struggles—understandable, but worth noting if you’re outfitting rustic or reclaimed pieces.

None of these are deal-breakers, but they’re the practical limits I ran into.

Best practices to get the most out of them

• Clean and dry the surface before applying.
• Choose the largest pad that fully fits the contact area without overhang.
• Give the adhesive a few hours before heavy sliding.
• Check high-traffic pieces quarterly; rotate or replace as needed.
• Trim for custom shapes, and sand rough feet for a better bond.

Bottom line and recommendation

The Scotch felt pads are a dependable, no-drama solution for protecting finished floors and quieting daily movement. The felt is dense, the adhesive is stronger than most, and the assortment covers nearly every common furniture footprint in a typical home. With basic prep, they stay put and make furniture easier to move without leaving scars behind.

I recommend these pads. They’re not the cheapest, but the combination of reliable adhesion, durable felt, and a practical size mix makes them a better value over time than generic alternatives. If you want to protect hardwood, tile, laminate, or vinyl and prefer a set-it-and-forget-it approach, this pack is an easy choice.