NERECNDENS 3 Pack Pick-up Tool Set - Extendable Magnetic Pick Up Tools and Flexible Grabber Claw - Retrieving Telescoping Magnet Pickup Tools - Flexible Extra Long Reach Bendable Curve Grabber with 4 Claws

A handy trio for the everyday “I dropped it” moments

There are few sounds worse in a workshop than a tiny metallic “tink” followed by silence. That’s the noise that sent me reaching for this pickup set more than once. After several weeks of keeping it in my shop and in the car, I’ve come to appreciate how this simple three-piece kit covers most retrieval jobs without overcomplicating anything.

What’s in the set

• A long telescoping magnet rated up to 15 lb, extending roughly 7.2 to 31 inches
• A compact telescoping magnet rated up to 1 lb, extending roughly 4.5 to 19.5 inches
• A 36-inch flexible grabber with four retractable claws (non-magnetic)

That mix—two magnets for ferrous parts and a claw for the rest—hits the needs I run into most around cars, appliances, desks, and drains.

Build and ergonomics

Both magnet wands use slim, telescoping shafts with knurled, rubberized grips. The extension is smooth and doesn’t rattle. The larger magnet’s head is broad enough to inspire confidence but not so big that it becomes a blunt instrument; the smaller wand has a tiny head that’s perfect for weaving between wiring looms and vents. Both include pocket clips, which I actually used—to clip the small magnet onto my shirt while I worked under a dash.

The flexible grabber is a tightly wound steel spring shaft with just the right balance of bendability and push. The plunger action at the handle feels positive: press to reveal the four claws, release to retract. There’s some spring resistance, as you’d expect, but it doesn’t feel flimsy. Over time, the shaft will “remember” a curve if you hold it bent, but you can straighten it back out easily.

Performance in real use

• Under the hood: I dropped a throttle body screw into the dark recess behind an intake manifold. The long magnet reached it with a couple of careful passes. The pull felt strong enough to lift small steel fasteners cleanly without the magnet flipping off. For heavier items (think a small wrench), the magnet can lift but I wouldn’t hover it over paint or anything delicate; the connection can snap free if bumped. For bolts, nuts, sockets, and drivers, it’s ideal.

• Interior car work: The small magnet truly shines here. I fished coins and a fuse from the no-man’s-land between a seat rail and carpet, where the larger head would be awkward. The slim profile gave me precision, and the lower pull force actually helps; it won’t latch onto every bracket and screw you brush past.

• Around the shop: Behind a standing desk and tool cabinet, the long magnet saved me from pulling furniture away from the wall. The wand has enough rigidity fully extended to guide the head without wobble. I like that I can choke up on the shaft to make small corrections if the magnet grabs the wrong fastener.

• Sinks and drains: The claw grabber is the right tool here. It’s non-magnetic, so it won’t stick to the sink basket or disposal housing. I’ve retrieved a plastic cap and a stainless screw (yes, non-magnetic) from a trap with it. The claws have a surprisingly secure bite on small cylindrical objects. Slick, flat items require a bit more finesse—approach from the edge, open the claws just enough, then release. The 36-inch length is generous for most residential drains and floor vents.

• Tight housings and curved paths: The flexible shaft wins any time I need to navigate around a bend. I used it through a headlamp access port to hook a thin rubber grommet that fell inside. A small tip: feed the grabber in gently, then open/close the claws a few times to “feel” for the part.

Strength and control

Magnets are all about balancing reach, pull, and control. The long wand has more than enough pull for its intended duty. If you try to haul something truly heavy, the magnet may hold but the telescoping shaft will flex. That’s not a flaw; it’s how a telescoping tool protects itself. Use it for fasteners and small hand tools and it’s rock solid. The small wand is perfect for “aimed” retrieval in cluttered spaces—its lighter pull means fewer unintentional grabs.

The claw’s grip is better than it looks. Rounded items up to roughly the diameter of a pencil are easy pickings. Thin washers or ultra-smooth items can slip if you over-squeeze and then bump the shaft; I had better luck with a partial squeeze, reposition, then full release. If the plunger feels stiff, bending the last inch of the shaft back and forth a couple of times seemed to free mine up.

Durability notes

I’ve used the set around water (bathroom sink, a damp exterior vent) and it’s held up fine. I make a habit of wiping the shaft and magnet heads dry afterward. The claw mechanism still feels crisp with no fraying or splaying of the fingers. The telescoping sections haven’t loosened or gotten gritty; again, a quick wipe keeps debris from working into the joints. I’d avoid abrasive contact on painted surfaces—the magnet faces can scratch if they pick up filings, so a small piece of tape over the head is a handy buffer when working over finished panels.

Everyday usability touches

• The pocket clip on the small magnet is more useful than it looks. I keep it clipped to a shirt or pocket edge when I’m moving between the bench and car.
• The rubberized grips are genuinely non-slip, even with gloves.
• The long reach on both the wand and the grabber reduces the number of times I need to move furniture or remove a panel “just to get a screw.”

I do wish there were a small LED on at least one of the tools. That said, pairing the set with a separate pen light fixes 90% of visibility challenges.

Limitations and trade-offs

• The big magnet head is occasionally too bulky for very tight channels. That’s where the small wand earns its keep.
• The claw isn’t a vise. Expect positive grip on small parts, not a death clamp on heavy or oily items.
• The small magnet’s 1 lb rating is appropriate; don’t ask it to haul a steel pry bar.
• If you brush the large magnet against a ferrous surface on your way in, it will stick—planning your approach path matters.

None of these are dealbreakers; they’re the realities of compact retrieval tools. Knowing which of the three to grab for each job is half the game.

Value

For the price, getting two distinct magnet wands plus a long, flexible claw is excellent coverage. I keep the small magnet in my glovebox, the long wand on the pegboard, and the claw with plumbing odds and ends. That spread means I rarely go hunting for the one tool I need. More expensive single tools sometimes add LEDs, mirrors, or heavier-duty shafts, but for general maintenance and DIY, this trio hits the sweet spot.

Who it’s for

• DIYers and mechanics who routinely drop fasteners in engine bays, under dashboards, or behind benches
• Homeowners dealing with clogs, lost rings, or bits that vanished into floor vents
• Office folks who don’t want to crawl under a desk to retrieve adapters or pens
• Landlords and maintenance techs who need a light, versatile retrieval kit on the go

If you need industrial-grade magnets or specialty grippers for production work, there are heavier-duty options. For everyday use, this set is the right mix of capability and simplicity.

Recommendation

I recommend the Nerecndens pickup set. It covers the two big retrieval categories—ferrous and non-magnetic—with tools that are genuinely useful, thoughtfully sized, and easy to control. The long magnet handles most shop and garage mishaps, the small wand excels in cramped interiors, and the 36-inch claw reaches where straight tools can’t. Add in comfortable grips and decent build quality, and it’s an easy kit to keep within arm’s reach. If you frequently work in dark cavities, pair it with a compact light; otherwise, this trio is ready as-is to save you time, frustration, and the occasional skinned knuckle.