Features
- 1.Bag/10,CPVC END Cap for closing the end of a pipe or fitting，Socket end for connecting to unthreaded pipes or fittings.
- 2.CPVC fittings are made to conform with ASTM D 2846 specification for CPVC plastic hot and cold water distribution systems.Not suitable for use with compressed air or other gases.
- 3.Installation requires the use of cpvc primer and cpvc solvent cement.
- 4.CPVC material is rated for hot and cold water plumbing systems to 100 PSI at 180 degrees F.CPVC for corrosion resistance, high strength, and less weight than fittings made from metal，Smooth interior finish for reduced friction and material buildup.
- 5.CPVC pipe systems and PVC pipe systems,It's two different pipe systems, with two different dimensional standards, and importantly requiring two different types of cement to join. Please don't confusing these two products when purchasing. Please confirm whether the item you need is PVC fittings or CPVC fittings. This is very important.
Specifications
| Color | Beige |
| Size | 1/2 inch |
| Unit Count | 10 |
Related Tools
Pack of ten 1/2‑inch CPVC socket end caps for closing and sealing the end of unthreaded CPVC pipes and fittings. Conforming to ASTM D2846 for hot and cold water distribution (not for compressed air or gases), they require CPVC primer and solvent cement and are rated to 100 psi at 180°F; CPVC and PVC use different dimensions and cements.
Project Ideas
Business
DIY micro-garden kits
Bundle CPVC end caps, short pipe pieces, soil pellets and seeds into compact 'micro propagation' or succulent starter kits to sell online or at markets. Include simple instructions (and a safety note about CPVC use and not for potable plumbing). Kits are lightweight, low-cost, and can be themed (herbs, succulents, air plants).
Custom cable-management products
Fabricate and sell desk cable funnels, under-desk grommets and multi-cable organizers built from CPVC caps and pipe. Offer painted/printed finishes, adhesive-backed mounting or screw-mount options, and bundle with branded cable ties. Market to home office buyers and small businesses looking for cheap, durable solutions.
Resin jewelry & tiny art line
Use the end caps as molds or form-holders to produce small round resin pendants, magnets, and cufflinks. Create a line with unique inclusions (dried flowers, metallic flakes) and sell on Etsy or at craft fairs. Emphasize handmade, industrial-chic styling and offer custom color requests.
Workshops — 'Make with Plumbing Parts'
Host in-person or online maker workshops teaching participants how to turn plumbing parts (like CPVC end caps) into home décor, organizers and jewelry. Sell workshop kits (caps, short pipe, primer/cement alternatives for non-plumbing joins, paints) and a how-to PDF. Local makerspaces, schools and craft stores are good partners for these classes.
Creative
Mini propagation cups
Glue a 1/2" CPVC end cap onto a short length of CPVC pipe (or use the cap alone) to make tiny propagation cups for cuttings and succulents. Drill one small drainage hole or leave as self-watering by nesting the capped tube into a shallow tray. Paint or label the beige caps for a finished look. (Use CPVC primer and solvent cement for permanent joins; avoid using these made items for potable plumbing.)
Cable grommets & desk funnels
Mount capped short pipe sections under a desk or on the side of shelving to create tidy cable pass-throughs and charging funnels. The socket end gives a neat collar look; sand and paint to match furniture. Secure with adhesive or screws (through the pipe) and route cables through the cap to keep clutter contained.
Resin round molds for jewelry
Use the inside of the CPVC end cap as a small, reusable round mold for casting epoxy resin pendants, magnets, or coin-sized art. Coat the interior with a release agent or a thin removable liner (plastic wrap) before pouring. The heat tolerance up to ~180°F is forgiving for most resin cures; test one cap first and avoid using primed/cemented joins as molds.
Industrial-style hooks & bumpers
Combine caps with short pipe stubs and wood or metal backplates to make industrial coat hooks, towel hooks, or furniture bumpers. The smooth rounded end looks intentional when painted or left beige for a workshop aesthetic. Use cemented connections for strength and add felt pads where the cap meets finished surfaces.