Sanshaoye 10-28 Inches Large Metal House Numbers for Outside | Custom Stainless Steel Home Address Letters Sign | Garden, Door, Stadiums, Park Signage, Floating Address Letters Plaques

Why I chose these metal numbers

Readable, durable, and easy to mount—that’s my checklist for outdoor address numbers. I wanted something large enough to be seen from the street, modern enough to complement a clean-lined facade, and sturdy enough to survive weather without warping or corroding. I went with the Sanshaoye metal house numbers in a 14-inch height for my front elevation, plus smaller letters to spell the street name on a fence. After a few weeks of living with them (including a couple of hard rains and a heat wave), I’ve got a solid sense of where they shine and where they could be better.

Design and build quality

The look is contemporary without trying too hard. The characters are cut from stainless steel and finished in a satin-matte black coating that reads neutral and upscale. Edges are crisp and consistent, with clean corners on straight strokes and smooth arcs on curves. The pieces feel substantial in hand—not flimsy sheet metal. I can’t speak to the exact gauge, but they’re rigid enough that even the tall characters don’t flex when you pick them up from a corner.

Black is the only color option, and the finish leans more toward satin than gloss. On lighter walls (white, cream, light gray), the contrast is excellent. On darker siding, you’ll want lighting or a backer to maintain visibility at night. I mounted a small up/down sconce above mine, and the floating install throws a shadow line that looks tailored without compromising legibility.

The letterforms themselves are a modern sans-serif with balanced proportions. They pair well with contemporary or transitional architecture, and they don’t clash with traditional facades either—the black finish keeps them understated. If you’re working with a highly ornamental home, you might prefer a serif style, but for most settings, these look appropriately refined.

Installation: floating vs. flush

You get hardware for both flat and floating installs. The floating option uses standoffs that hold each character off the wall; visually, this is the better choice on flat surfaces because it adds depth. The flush mount is more practical on uneven materials like split-face stone or deeply textured stucco.

What I liked:
- The included standoffs are straightforward: post, cap, and threaded screws. Once you set one, the rest follow.
- Hardware arrived clearly bagged and labeled, with no missing pieces.
- Pre-drilled mounting points on the characters were clean and burr-free.

What I changed:
- For brick, I swapped the generic wall plugs for masonry-specific anchors. The included plugs will work in many cases, but proper masonry anchors grip better and reduce the chance of loosening over time.
- I added a bead of clear exterior-grade silicone where the screws penetrate the facade to keep water out.

What I wish it included:
- A paper template. If you’re spelling a name or aligning multiple numbers, a full-size template is a time-saver. I made my own using painter’s tape and a level: lay the characters on a table, measure spacing, mark centerlines and hole positions on tape, then transfer it to the wall. It adds 15 minutes and makes the result look professionally laid out.

If you’re mounting to wood or fiber cement, a standard drill and exterior screws are fine. For brick, stone, or stucco, use a masonry bit, drill slowly, vacuum dust from the holes, and then insert anchors. On highly textured surfaces, consider the flush mount to avoid wobble, or shim the standoffs with small washers where needed.

Total install time for my three numbers was about 60 minutes, including template prep.

Durability and weather performance

I’ve had a few downpours and a week of direct sun since installing. No signs of rust, no blistering or chalking of the finish, and the standoffs haven’t loosened. The coating resists fingerprints better than a gloss finish and wipes clean with a damp cloth. It’s marketed as weather-resistant, and based on early impressions, that checks out.

Stainless steel was the right material choice here; it’s less prone to corrosion than plain steel, and the coating provides an extra layer of protection. I would still avoid abrasive pads or harsh chemicals when cleaning—mild soap and water is more than enough.

One minor note: in full sun, the metal gets warm to the touch. That’s expected with black-coated metal, but worth keeping in mind if you’re placing numbers near a walkway where kids might reach.

Sizing and visibility

The range runs from 10 inches up to a very large 28 inches. That flexibility matters more than you might think. A common rule of thumb: every inch of character height is readable from roughly 10 feet. Based on that, here’s what worked for me:
- 10–12 inches for viewing from 30–50 feet (typical suburban setbacks).
- 14–18 inches for 50–100 feet.
- 20–28 inches for long driveways or large commercial facades.

The black finish is legible in daylight as long as you have contrast with the background. At night, lighting makes a big difference. The floating mount helps by casting shadows in daylight, but after dark, I recommend a sconce or integrated address light. If your facade is dark, consider mounting the characters to a lighter backer plate or panel to preserve contrast.

Use cases beyond the front door

These numbers aren’t just for house addresses. The scale options make them suitable for:
- Garden markers or gate names.
- Garage bay labeling.
- Community or park signage where vandal resistance and weather durability matter.
- Wayfinding on long fences or walls.

If you’re installing in a public or high-traffic space, use threadlocker on the standoff screws and step up to heavier-duty anchors. The included hardware is fine for residential use, but added security is smart in public-facing applications.

What could be better

• Color choices: Black is versatile, but a stainless or brass finish option would broaden design flexibility. As it stands, you’re limited to the black coating.
• Template omission: A printed template would make multi-character layouts faster and more accessible for first-time installers.
• Uneven surfaces: Floating mounting on rough stone can be fiddly; a slightly longer standoff option would help bridge deep mortar joints. You can solve this with washers, but an included spacer kit would be welcome.

None of these are dealbreakers, but they’re areas where a good product could become a great one.

Tips for a cleaner install

• Mockup first: Tape the characters to the wall to check scale, spacing, and line-of-sight from the street before drilling.
• Mind the height: Mount at or slightly above eye level from the primary approach. Numbers that are too high can be hard to read from the curb.
• Seal penetrations: A small bead of silicone behind standoffs and in pilot holes helps keep water out of your wall.
• Aim a light: A low-wattage sconce aimed at the numbers improves nighttime legibility far more than going up a size.

The bottom line

The Sanshaoye metal house numbers strike a strong balance of design, durability, and ease of installation. The stainless build and weather-resistant black coating feel ready for the long haul, the modern letterforms look sharp across a range of architectural styles, and the hardware supports both flush and floating mounts without fuss. The biggest limitations are the single color choice and the lack of a layout template, neither of which outweigh the overall quality and flexibility in sizes.

Recommendation: I recommend these numbers for homeowners and small commercial projects looking for a clean, modern address solution with oversized options and solid weather performance. Choose a size based on your viewing distance, plan for proper anchors on masonry, and add a light if your facade is dark. Do that, and you’ll end up with an address that’s easy to read, built to last, and quietly elevates your curb appeal.