Features
- 【18 Gallons point of use】 storage water heater provides ample hot water for sink washing, dishwasher, washing machine or 20 - 25mins shower. Factory setted temperature to 125°F. It can be adjusted from 90°F to 150°F through built-in thermostat
- 【25.5-inch low profile】 compact small water heater (120 Volt Hard Wired), independent installation or as booster in-line with a large hot water source, ideal for kitchen & bathroom sink, RV & boat, vacation cabin & camper, garage & barn, shop & salon
- 【INCOLOY-800 heating element】 better corrosion resistance performance and more efficient than copper at higher temperature, thus has a longer life span and energy saving
- 【Corrosion Resistant Tank】 Inner tank was coated with porcelain enamel glass, which has better performance in resistant to high temperature and rust, reducing leaking chance, thus ensuring a long life service and low maintenance
- 【UL Listed safety】 including ASME, ANSI and CSA (AGA) approved T&P relief valve, independent drain port, high temperature limit protection and adjustable thermostat
- 【Peace of Mind】 - Water connection: 3/4" NPT; Electrical requirements: 1500W at 120 Volts (AC); Recommended circuit breaker: 15AMP；Maximum water pressure: 150 PSI.
Specifications
| Energy Efficiency Class | Efficient |
| Color | White |
| Unit Count | 1 |
Related Tools
An 18-gallon electric point-of-use storage water heater that supplies hot water for sinks, dishwashers, washing machines, or short showers and is designed for compact installations or use as an inline booster. It runs on 120 V/1500 W with a built-in adjustable thermostat (90–150°F, factory 125°F), INCOLOY-800 heating element, porcelain-enameled tank, UL-listed safety features including T&P relief valve, drain port and high-temperature limit protection, 3/4" NPT connections, and requires a 15 A circuit (maximum water pressure 150 PSI).
Project Ideas
Business
Glamping/Tiny‑Cabin Shower Package
Develop and sell a turnkey 'hot-shower kit' for glamping sites and tiny-cabin owners: include the 18‑gal heater, pre‑plumbed fittings, a compact mixer, showerhead, mounting templates and installation instructions. Offer installation add‑ons and warranty/maintenance plans. Emphasize the unit's small footprint and 20–25 minute shower capability.
Mobile Hot‑Water Cleaning Service
Start a specialty cleaning/detailing business using the heater as a compact hot‑water source for upholstery, carpet spot-cleaning, or small pressure/steam tasks. Outfit a van or trailer with shore-power hookups or a suitable generator, water tanks and a pump. Market to event venues, restaurants and vintage-car owners who need portable hot-water cleaning without large plumbing installs.
Rental Fleet for Events & Construction
Offer short‑term rentals of point‑of‑use water heaters to film productions, construction sites and outdoor events that need temporary sinks or showers. Provide quick‑connect hoses, certified T&P relief valves and simple setup guides. Charge daily/weekly rates plus delivery and setup fees, and offer insurance and sanitation add‑ons to increase revenue.
Plumbing/Retrofit Service for Small Spaces
Bundle the heater into a service business focused on tiny-home, RV and basement retrofit installs. Sell product + professional installation (electrical and plumbing), and offer maintenance contracts (flush/drain, T&P valve checks, thermostat calibration). Upsell related fixtures (tankless boost loops, insulated lines) and explain the 120V/15A electrical requirement to customers.
Creative
Compact Glamping Shower Station
Build a low-profile, weatherproof shower stall for a backyard glamping spot or tiny cabin using the 18‑gal heater as the hot-water source. Mount the heater in a small utility closet, add simple 3/4" NPT fittings, a mixer valve, a compact showerhead and storage shelves. The unit's adjustable thermostat (90–150°F) and 20–25 minute hot shower capacity make it ideal for off-grid-style guest comforts (requires a 120V/15A circuit).
Portable Hand‑Washing & Food‑Prep Sink
Create a freestanding mobile sink unit for farmers markets, food stalls or craft fairs: plywood or stainless cabinet with built-in reservoir, pump, faucet and the 18‑gal heater installed inside. Provide on/off foot pump or electric pump options, a drain port for easy servicing, and lockable wheels so vendors can roll a compliant hot-water station to events.
Artisan Soap / Dyeing Workbench
Integrate the heater into a craft studio bench as a dedicated hot-water station for melt‑and‑pour soap, candle‑making, small-batch dyeing or fabric prepping. The precise thermostat and INCOLOY-800 element give stable temperatures for tempering and color transfers. Add a mixing sink and a small re-circulation loop or insulated delivery hose for consistent, on‑demand hot water.
Seedling Heat‑Bench & Plant Propagation Aid
Use the heater as a warm-water source for a propagation bench: route heated water through a safe external coil or heat-exchanger under seed trays (no modification of the tank required) to gently raise root-zone temperatures. This extends growing windows for hobby growers and can be built as a compact greenhouse add-on — consult a plumber for safe loop plumbing and pressure limits.