Features
- 2 ft length for compact, portable use
- 1-3/16 in (30 mm) polyester webbing resistant to wear, oil, dust and water
- Can be used as a temporary horizontal or vertical anchor around smaller structural members
- Minimum breaking strength 5,000 lb (23 kN)
- Rated capacity for use as an anchor: 310 lb (140 kg)
- 2-year limited warranty
Specifications
| Length | 2 ft (0.6 m) |
| Width | 1-3/16 in (30 mm) |
| Weight | 0.64 lb (≈290 g) |
| Material | Polyester webbing |
| Minimum Breaking Strength | 5,000 lb (23 kN) |
| Rated Capacity | 310 lb (140 kg) |
| Standards | ANSI Z359.18-2017; OSHA 1926.502 and 1910.140 |
| Warranty | 2 Year Limited Warranty |
A 2 ft web choker strap designed to provide a temporary fall-protection anchor point on scaffold pipes or other appropriate smaller-diameter structural members. Constructed from polyester webbing for abrasion and environmental resistance and intended for temporary use as a horizontal or vertical anchor.
Project Ideas
Business
Jobsite Anchor Mapping & Tagging
Offer a service to survey sites, identify compliant structural members for temporary anchorage, photograph and map locations, and tag each with color-coded sleeves and QR inspection links. Deliver a digital anchor plan aligned with ANSI Z359.18 and OSHA 1910.140/1926.502.
Temporary Anchor Kit Rental
Rent sealed, inspected kits that include web chokers, compatible connectors, tag sleeves, and a quick-start guide. Charge daily/weekly, with discounted long-term rates and optional on-site training add-on. Rotate stock and track inspections via QR to ensure compliance.
Fall Protection Micro-Trainings
Run 30–60 minute on-site toolbox talks teaching correct use of the web choker as an anchor on scaffold pipes and similar members. Include hands-on practice with a portable demo rig, then upsell kits and inspection sleeve sets.
PPE Tracking & Compliance App
Build a lightweight SaaS that pairs QR tags on chokers with a mobile app for inspections, photos, geo-stamped anchor maps, and automatic retirement reminders. Offer tiers for small contractors and enterprise reporting for large crews.
Bundled E‑commerce Kits & Subscriptions
Sell curated anchor bundles (basic, scaffold, rooftop) that pair the 2 ft choker with approved connectors, storage, and ID sleeves. Add a subscription for periodic replacement, inspection supplies, and updated laminated guides.
Creative
Pop-up Training Rig
Build a foldable demo stand using short scaffold pipes on a plywood base to practice correct placement of the 2 ft web choker as a temporary horizontal or vertical anchor. Include labels showing acceptable pipe diameters, direction of load, connector compatibility, and ANSI/OSHA references for quick tailgate training.
Anchor Readiness Board
Create a wall-mounted storage board with breathable pouches and labeled pegs for clean/dry chokers, connectors, and inspection checklists. Add a moisture indicator card and a wipeable pre-use inspection area so crews can quickly grab a compliant anchor setup.
Color-Coded ID Sleeves
Make removable, non-abrasive color sleeves or wrap tags that slide over the choker (no sewing or piercing) to indicate use zone (roof, scaffold, industrial), install date, or inspection status. Use reflective tape for low-light visibility and printed icons to reduce language barriers.
QR Inspection Tag Kit
Assemble clip-on silicone/Velcro tag holders with QR codes linking to a digital inspection log. Each choker gets a unique code for recording pre-use checks, service dates, and retirement notes without altering the webbing.
Anchor Point Photo Guide
Produce a compact, laminated flipbook showing do/don’t examples of wrapping the choker around smaller-diameter structural members, correct connector orientation, and common hazards (sharp edges, corrosion, incompatible diameters). Keep it in the kit for quick reference.