WEKIS Fence Gate Kit Gate Hardware, 1 Set Anti Sag Gate Kit Gate Frame Cornor Brackets Kit with Self Closing Gate Springs Hings Latchs for Outdoor Garden Backyard Wooden Fence Deck Porch Gate

Why I picked up this gate kit

A sagging backyard gate finally pushed me to try the Wekis gate kit. I wanted something sturdier than a cable-and-turnbuckle fix and cleaner than cobbling together mismatched hardware. This kit promised a square, rigid frame, separate hinge/post brackets for flexibility, and a self-closing, self-latching setup—all in heavy-duty, powder-coated steel. After living with it through storms and daily use, I’m impressed by how much structure and consistency it adds to a wooden gate.

What’s in the box and first impressions

The kit includes:
- Two heavy hinge brackets (post-side)
- Four corner brackets (to square and stiffen the gate frame)
- A self-closing spring
- A latch, bar, and pull ring with cable
- A healthy assortment of screws in multiple lengths

Everything is powder-coated black and feels substantial. The corner brackets are the stars; they convert a simple 2x4 frame into a rigid, square assembly that resists racking. The hinge brackets are equally stout and, crucially, separate from the corner brackets, so you’re not forced into a specific gate width or a fixed hinge location. Fit and finish were tidy—no sharp edges, clean welds, and a consistent coating.

Installation: easier than building from scratch, with a few notes

I built a 42-inch-wide, 48-inch-tall gate from 2x4 cedar and used the corner brackets to assemble the frame on a pair of sawhorses before adding pickets. That approach lets you check square, tweak diagonals, and fasten everything while it’s flat and accessible. Once the frame was squared, I pre-mounted the latch side hardware, then hung the gate using the hinge brackets.

A few observations from the install:
- The separated hinge/post brackets are a big advantage. They let you set a proper reveal (gap) against the post and compensate for a post that isn’t perfectly plumb without twisting the gate.
- The corner brackets truly keep the gate square, which is great for longevity. If your fence posts or grade are out of whack, you’ll notice it—your pickets may need scribing to maintain sightlines. That’s not a flaw; it’s the reality of a square frame in an imperfect opening.
- The included screws work, but for hinge-to-post connections I prefer longer structural exterior screws or lag bolts for extra bite, especially with a heavy gate. The provided hardware is fine for the frame and latch; I upgraded the hinge-to-post fasteners.
- The self-closing spring requires attention to orientation and pre-load. Before final mounting, loosely fit it, test swing, then set tension so it closes reliably without slamming.

Two pairs of hands help. The steel components and a full wood gate add up, so supporting the gate at the right height while you align hinges is much easier with a helper or a clamp-and-shim setup.

Build quality and durability

The steel parts are thick and confidence-inspiring. The powder coat has held up to rain and temperature swings with no rust bloom or chipping so far. The latch is a straightforward, gravity-catch style with a bar that drops in reliably. The pull ring and cable make it easy to open from the opposite side. There’s no keyed mechanism; you can add a small carabiner or padlock through the latch hole if you want a basic lockout.

The spring is robust but sensitive to how it’s installed. Overwinding or mounting it backward will cause trouble. Installed correctly, it’s been consistent and hasn’t loosened appreciably over time.

The kit is rated for up to 200 pounds, which is plenty for a typical residential gate made from 2x4s and standard pickets. Just remember the hinge-side post needs to be anchored well. A flimsy post in shallow soil will flex no matter how good the gate hardware is.

Performance in daily use

The most noticeable change is how the gate feels. It swings true, doesn’t rub, and hasn’t sagged or twisted under daily use. The square frame keeps the latch aligned, so there’s no fiddling to get it to catch. The self-closing function is convenient around kids and pets; I set it to close with enough force to engage the latch without slamming. If you need less tension—for example, to avoid startling a dog—back it off a notch and test.

The hinges swing smoothly without binding. Exposure to rain hasn’t introduced squeaks; a dab of exterior grease on moving parts at install helps. The aesthetic is clean and purposeful: matte black hardware against wood looks intentional rather than “patched.”

Fit and compatibility

• Lumber: Designed for 2x4 construction or larger. I’d stick to kiln-dried or well-seasoned lumber to minimize movement.
• Gate width: The separated hinge and corner brackets make the system width-agnostic within reason. Measure the opening, allow for hinge/latch clearances, and build your frame to fit.
• Posts: Works on wood posts; mounting to metal or masonry would need appropriate anchors.
• Situations: Backyard privacy gates, garden gates, deck entrances, shed doors—all fair game.

Because the corner brackets square the frame firmly, they can expose misalignments in fence lines. If your posts aren’t plumb or your opening is out of square, budget a little time for shimming and picket alignment.

What I’d change

• Screw selection: The included screws do the job but are on the short side for hinges into posts. I swapped in longer exterior-grade structural screws. Torx-head fasteners would also reduce cam-out versus Phillips.
• Spring documentation: The spring can be installed in a way that fights itself if you’re not careful. Clearer guidance on orientation and pre-load would help first-time installers.
• Optional lock upgrade: The latch is reliable but basic. An included lockable hasp or a more tamper-resistant latch would cover more use cases out of the box.

None of these are deal-breakers, but they’re worth noting for a smoother install.

Tips for a clean install

• Pre-assemble the frame on a flat surface using the corner brackets, check square with diagonal measurements, and then add pickets.
• Pre-drill pilot holes in hardwoods to prevent splitting and reduce screw cam-out.
• Use shims to fine-tune reveal gaps during hinge installation.
• Upgrade hinge-to-post fasteners to longer structural exterior screws or lags.
• Dry-fit the self-closing spring, test swing, and then set final tension.
• Seal cut ends of lumber and pilot holes with exterior sealant for longevity.
• If your posts are out of plumb, correct them if you can; otherwise, let the hinge bracket placement and shims do the heavy lifting.

Value and use cases

Buying hinges, corner braces, a spring, and a latch piecemeal can add up quickly—and you’ll still need to make sure they play nicely together. This kit avoids that headache. For a single purchase, you get a cohesive set that’s more rigid than cable fixes and simpler than crafting a welded frame. If you’re building new gates or rehabbing a sagging one, the value is compelling.

Who it’s for

• DIYers who want a square, long-lasting wooden gate without fabricating metal frames.
• Homeowners dealing with sagging or misaligned gates who want a structural fix.
• Pet and parent households that benefit from a self-closing, self-latching gate.
• Anyone who prefers visible, purposeful hardware over hidden joinery.

If you need an ultra-minimal look or a specialized lock, you may want to pair the kit with different latch hardware.

Recommendation

I recommend the Wekis gate kit. It’s sturdy, thoughtfully designed, and genuinely solves the two biggest gate problems: sag and misalignment. The separated hinge and corner brackets make installation flexible and help the gate stay square over time, and the self-closing spring adds everyday convenience. Plan to upgrade a few screws and take a minute to orient the spring correctly, and you’ll end up with a gate that closes cleanly, latches reliably, and looks sharp doing it.