Features
- Anchor-mounted leading-edge SRL configuration
- Energy absorber at harness end
- Impact-indicating hook at harness end
- Rugged, high-impact polymer housing
- Trip-free connector operation for ease of movement
- Galvanized steel cable lifeline
- Anchor and harness connectors rated 3,600 lb (16 kN) gate capacity
- Weighs approximately 18.6 lb (8.44 kg) for easier handling and installation
Specifications
| Working Length | 50 ft (15.24 m) |
| Lifeline Material | Galvanized cable |
| Lifeline Diameter | 7/32 in (5.56 mm) |
| Net Weight | 18.6 lb (8.44 kg) |
| Anchor End Connector | Carabiner, steel (galvanized alloy steel with golden yellow/silver passivation), 3,600 lb (16 kN) gate |
| Harness End Connector | Snap hook with impact-indicating feature, steel, 3,600 lb (16 kN) gate |
| Osha Capacity | 130 lb (58 kg) / 420 lb (190 kg) (as stated for OSHA) |
| Ansi Ratings | ANSI Z359.14-2021 (Class 2) — capacities cited: 130 lb (58 kg) / 310 lb (141 kg) per referenced standard text |
| Standards And Compliance | Meets ANSI Z359.14-2021 Class 2; complies with OSHA 1926.502 and OSHA 1910.66 |
| Housing Material | High-impact strength polymer |
| Warranty | 2-year limited warranty |
Anchor-mounted leading-edge self-retracting lifeline (SRL) with an energy absorber at the harness end. Designed for use at foot level or mounted above, it limits fall arrest forces and provides a compact, durable connection between the user and an anchor point.
Project Ideas
Business
SRL Rental and Recertification Service
Offer short- and long-term rentals of Class 2 leading-edge SRLs, with scheduled inspections, cleaning, and documentation. Use serialized QR tags to track location, last inspection, and OSHA/ANSI compliance, and provide swap-outs for any unit that trips its impact indicator or reaches inspection intervals.
On-Site Leading-Edge Safety Assessments
Provide job-walk consulting that identifies compliant anchor points, verifies edge conditions, estimates required fall clearance, and recommends compatible anchors and edge protection. Deliver a written rescue plan and photographic documentation, then follow up with toolbox talks for crews using the SRL.
Hands-On Fall Protection Training
Run accredited courses focused on leading-edge work. Include classroom modules on ANSI Z359.14-2021 Class 2 requirements, equipment selection, and limitations, plus controlled, non-exposure practicals using training rigs to practice inspection, connection, and trip-free movement techniques with the SRL.
Mobile PPE Pop-Up and Inspection Van
Equip a service van to visit roofing and steel-erection sites, offering on-the-spot SRL inspections, tagging, minor service (cleaning, label replacement), and sales of compatible anchors and harnesses. Bundle same-day rental replacement to minimize downtime when units are removed from service.
Compliance Management Subscription
Develop a SaaS platform paired with asset tags that tracks SRL inventories, inspection dates, training records, and incident reports. Provide automated reminders, digital sign-offs, and a dashboard that shows which sites are outfitted with Class 2 leading-edge protection and which units require attention.
Creative
Modular Leading-Edge Training Rig
Build a portable, modular platform that simulates common leading-edge scenarios (steel deck, concrete slab edge, parapet) to demonstrate correct SRL setup, connection at foot level, and inspection of the impact-indicating snap hook. Use it as a safe, ground-level teaching prop for clearance planning and proper anchorage selection without exposing learners to real fall hazards.
Fall Protection Inspection Station
Create a dedicated inspection cart with lighting, magnification, and photo capture where technicians can document condition of the galvanized cable, connectors, housing, and absorber pack. Integrate QR-coded tags to log ANSI/OSHA compliance checks and automatically flag units showing impact indicators or wear for removal from service.
Decommissioned SRL Cutaway Display
Turn a retired, non-serviceable SRL into a cutaway demo that reveals the internal brake, drum, and energy absorber. Mount it on a board with labels and a simple dial that shows how arrest forces are managed. Use it in tool-box talks and safety orientations to make the invisible safety mechanisms tangible.
Jobsite Edge-Protection Kit Organizer
Assemble a clearly labeled, weatherproof case that pairs the SRL with compatible anchors, edge protectors, and a laminated quick-reference for selection and clearance estimation. Color-code components for roof, steel, or concrete jobs to streamline correct setup and reduce trip hazards with tidy cable routing.
Visual Cue System for Harness-End Checks
Design high-visibility, non-load-bearing sleeves and tags that sit near the harness-end absorber and impact indicator. The cues remind users to verify gate rating (3,600 lb), check the impact indicator status, and confirm Class 2 leading-edge suitability before connecting, reinforcing consistent pre-use checks.