Rok 168 Pack Rok Hardware Heavy Duty 3/8" (9.5mm) Diameter Self-Adhesive Felt Pads, Furniture/Cabinet Bumpers, 1/8" (3mm) Height, Round, White - ROKFELTP38WHT

Why I reached for these pads

I’m picky about the small noises that add up in a kitchen. The clack of cabinet doors and the rattle of drawers can make an otherwise quiet space feel busy. I picked up the Rok felt pads to test as door and drawer bumpers and as general-purpose protectors under small objects. The promise is straightforward: a dense felt disc with a pressure-sensitive adhesive that cushions impacts, prevents scuffs, and cuts down on vibration. With 168 in the pack, I had enough to equip a full kitchen and still have plenty left for other projects.

The specs that matter

• Size: 3/8 in (9.5 mm) diameter, 1/8 in (3 mm) thick
• Color: White
• Quantity: 168 pads
• Material: Felt with pressure-sensitive adhesive

That 1/8-inch thickness is on the generous side for cabinet bumpers, which helps with noise, misalignment, and avoiding door slap on face frames. The 3/8-inch diameter is small and versatile—ideal for cabinet doors and small devices, but not intended for chair legs or heavy furniture where you’d typically want larger pads.

Installation and adhesion

I installed the pads in three scenarios:
- As bumpers inside cabinet doors and drawer faces
- On the underside of small accessories (coasters, a desktop stand, and a 3D-printed organizer)
- As spacers on picture frames to keep the glass off painted walls

Prep matters. Wiping the surface with isopropyl alcohol and letting it dry fully gives the adhesive a clean bite. Placement is as simple as peeling and pressing for 10–15 seconds. The release liner is thin; I found using a fingernail at the edge or the tip of a utility blade made peeling quick and consistent. Once on, I avoided stress for an hour to let the adhesive set before closing doors or sliding objects.

Adhesion has been solid on painted wood, finished plywood, powder-coated metal, and smooth plastics. On a raw unfinished wood shelf, the pad stuck but could be nudged if I dragged an item across it repeatedly—typical behavior for this kind of adhesive in porous or dusty environments.

Noise and impact performance

On cabinet doors, the difference is immediate. The sharp click turned into a muted, soft close—not the hydraulic hush of a soft-close hinge, but a genuinely quieter, less jarring impact. The felt’s 3 mm thickness and density do the heavy lifting here: it compresses just enough to absorb energy without bottoming out.

I placed two pads per door, positioned near the top and bottom corners where the door meets the frame. On wider pantry doors, I added a third at the midpoint to even out contact. On drawers, one pad per side on the face frame was sufficient. If you have slight door/frame misalignment, the extra thickness helps smooth out contact and eliminate chatter.

Under small items, these pads add grip and protect surfaces. They aren’t rubbery, so they won’t “lock” something in place the way silicone feet do, but they reduce sliding on most table finishes and keep hard edges from scuffing shelves and countertops.

Durability over time

After several months of daily use in a warm, often steamy kitchen, the cabinet and drawer pads still adhere and continue to cushion well. The felt compresses slightly during the first week and then stabilizes. It doesn’t pill or shed with normal door closing. On the underside of a desk accessory that gets slid around daily, the pads eventually showed wear on the edges; for that kind of constant lateral abrasion, I’d opt for larger or rubberized feet. As cabinet bumpers and gentle spacers, these hold up.

The adhesive removes cleanly from painted and finished surfaces when warmed slightly with your hand and peeled slowly. I didn’t experience paint lift, but I’d still avoid applying to fragile or flaking finishes.

Where they shine

• Cabinets and drawers: They hit the sweet spot of thickness and density for quieting impact without pushing doors noticeably out of alignment.
• Picture frames and wall protection: A pad on each corner keeps frames from scuffing walls and reduces rattling when doors close nearby.
• Small accessories and electronics: Great as anti-scuff feet on stands, organizers, and lightweight gear.

Their small diameter makes them easy to hide, and the white color blends well on white or light cabinetry. On darker furniture, consider placing them where they won’t be seen, or choose a darker pad if aesthetics matter.

Where they struggle

• High-abrasion, sliding contact: On objects that are constantly dragged, the felt edges will wear and the adhesive may creep. Use larger or rubberized feet for that job.
• Heavy furniture legs: The 3/8-inch size is simply too small. You’ll want bigger, thicker pads designed for furniture.
• Moisture-prone areas: They handle normal kitchen humidity, but I wouldn’t rely on felt pads under items that see standing water.

Practical tips for best results

• Clean first: A quick alcohol wipe meaningfully improves adhesion.
• Press and wait: Apply firm pressure and give the adhesive some time before stressing it.
• Double up if needed: For extra spacing or silence, stacking two pads works and doesn’t look bulky on hidden surfaces.
• Place to distribute load: On wide doors, three pads prevent rocking and uneven wear.
• Keep a few spare: If one gets damaged, replacement takes seconds.

How they compare to other bumper options

• Felt vs. silicone domes: These felt pads are quieter on impact and less “springy,” which I prefer for cabinets. Silicone hemispherical bumpers can be grippier and better for vibration isolation under gear, but they’re usually more visible and can feel bouncy on doors.
• Small pads vs. large furniture pads: The Rok pads are purpose-fit for cabinetry and small items. For chairs, stools, or heavy pieces, go larger to spread load and reduce compressive wear.

Value and pack size

A pack of 168 goes a long way. Outfitting an average kitchen used less than half the sheet. That surplus is genuinely useful: you’ll find uses for the rest as you notice little rattles, picture frames that nick walls, or accessories that could use a bit of protection. Given the price per pad, the value is easy to justify.

The bottom line

The Rok felt pads do exactly what I want from cabinet bumpers: they quiet impacts, protect finishes, and stay put when installed on clean surfaces. The adhesive is strong enough for doors and frames but not so aggressive that removal becomes a repair job. Their small size and neutral color make them easy to hide, and the generous thickness provides reliable cushioning without creating awkward gaps.

They’re not the right choice for chair legs, heavy furniture, or anything exposed to constant sliding or standing water. For those jobs, different pads or materials are better suited. But as a household staple for cabinetry and light-duty protection, they’re a straightforward, effective solution that’s easy to recommend.

Recommendation: I recommend these Rok felt pads for anyone looking to quiet standard cabinet doors and drawers and to add discreet protection under small household items. They’re inexpensive, easy to apply, and durable in the use cases they’re designed for. If your needs involve heavy furniture or high-abrasion movement, choose larger or rubberized alternatives; for cabinetry and everyday bumpers, these are a reliable pick.