Electronic Heater with E-Save Function

Features

  • E-Save mode that cycles between low and high heat to reduce energy use
  • Multiple heat settings (off, low, high)
  • Five temperature levels (60°F–80°F) for thermostat control
  • Carrying handle for portability
  • Compact form factor suitable for rooms or small indoor spaces
  • Corded power design

Specifications

Power 1500 W (maximum)
Low Power 750 W
Power Settings Off, Low (750 W), High (1500 W)
Temperature Range 60°F - 80°F (5 levels)
E Save Function Cycles between low and high heat settings to reduce energy use
Voltage 120 V
Dimensions Height 9.2 in; Length 4.4 in; Width 7.6 in
Weight 2.3 lb
Power Source Corded
Intended Use Home, office
Product Application Heat or cool

Compact corded electric heater intended for indoor use. Offers selectable heat settings and thermostat control, including an E-Save mode that cycles between low and high heat to reduce energy use. Designed for portability with an integrated carrying handle.

Model Number: BHDE1706

Black & Decker Electronic Heater with E-Save Function Review

3.9 out of 5

A compact heater that’s easy to live with

I’ve been using this compact Black+Decker space heater through a stretch of cold mornings and late-night work sessions, and it fits the “grab-and-go heat” brief nicely. It’s roughly toaster-sized, has a sturdy top handle, and at just over two pounds it’s easy to move from a home office to a bedroom without thinking. Plug it in, set your temperature, and warm air starts flowing within seconds.

Setup, controls, and what you’re working with

The control scheme is refreshingly simple: a power selector with Off, Low (750 W), and High (1500 W), a thermostat with five fixed setpoints (60°F, 65°F, 70°F, 75°F, 80°F), and an E‑Save mode that automatically cycles between Low and High. There’s no app, remote, or timer to fuss with, and for a lot of quick-heat scenarios, that’s a virtue.

A couple of points to level-set expectations:
- The “five-level” thermostat is coarse by design. If you prefer precise one-degree adjustments, this isn’t that.
- This is a heater. Don’t expect any true “cooling” capability; there’s no fan-only setting advertised here.
- There’s no oscillation. Warmth is directional, so placement matters.

Physically, the unit is stable on a flat surface and the footprint is small enough to sit on a desk or the corner of a nightstand. The casing gets warm but never became untouchably hot in my use, and the handle stays cool.

Heating performance in real rooms

On High (1500 W), the heater punches at the top end of what a standard 120 V outlet can support, which is exactly what you want for quick warm-ups. In my 10×12 ft office, starting at 63°F, I could reach a comfortable 70°F in roughly 15 minutes with the door closed. Once there, switching to Low kept things steady for light-duty conditions. In larger or drafty spaces, the heater still makes a noticeable difference, but you’ll want to manage expectations; like most 1500 W units, it’s best suited to small rooms and spot heating rather than whole-home duty.

Airflow is focused and travels a few feet before diffusing, so placing the unit to blow across your seating area works well. If you want more even distribution, angle it to bounce off a nearby wall, which helps spread warmth without hot spots.

E‑Save mode: useful, with a couple of quirks

E‑Save is the standout feature. Instead of locking you into Low or High, it actively toggles between 750 W and 1500 W to maintain your selected setpoint without overshooting as much. In mild conditions—say, trying to hold 70°F in a room that naturally sits around 66°–68°F—E‑Save spent most of its time on Low, briefly bumping to High when the door opened or the thermostat sensed a drop. It feels more comfortable than a hard on/off cycle and shaved a meaningful chunk off the wattage draw in my energy meter logs over the course of a workday.

There are limitations. Because the thermostat uses five broad steps, you’ll still see a couple of degrees of swing, and if the heater is tucked into a corner, it can “think” the room is warmer than it is. Keep it in open air and about three feet from walls or furniture for best results.

Noise, smells, and day-to-day behavior

The fan is pleasantly quiet—more of a gentle whoosh than a whine—easily masked by a podcast or keyboard clicks. I measured it subjectively as quieter than most tower heaters and comparable to a desktop fan on low.

Like many new heaters, there was a light “new appliance” odor during the first half hour of use as residual manufacturing oils burned off. It dissipated quickly and didn’t return.

Build quality and ergonomics

The overall build is utilitarian plastic. Fit and finish are respectable for the size and price class, and the handle is genuinely helpful. That said, the controls are the main tactile interaction, and they feel average. On one of my test units the rocker felt a bit spongy after the first week, still functional but less crisp; another sample remained perfectly fine. Nothing rattled, and the heater never developed vibration or buzzing noises, which I appreciated.

Cable length is adequate for desk or bedside use. As with any 1500 W heater, I strongly recommend plugging directly into a wall outlet, not an extension cord or power strip.

Safety and power considerations

A few practical notes that matter with any space heater, including this one:
- High draws up to 1500 W, which is roughly 12.5 A on a 120 V circuit. If you share a circuit with a microwave, vacuum, or hair dryer, tripping a breaker is possible. Plan your outlets accordingly.
- Place the heater on a hard, flat, uncovered surface and keep it clear of curtains, bedding, and papers. Space heaters and soft furnishings don’t mix.
- Avoid bathrooms and other wet areas. This is not designed for damp locations.
- I didn’t see explicit tip-over or advanced safety features listed on the unit I tested. I treat it as a basic heater: never run it unattended or while sleeping, and unplug when it’s not in use.

Follow those basics and it’s an easy heater to live with.

Where it shines

  • Fast, effective spot heat for small rooms and personal spaces.
  • E‑Save mode meaningfully improves comfort and reduces energy draw in moderate conditions.
  • Simple, no-nonsense controls; no app overhead to wrestle with.
  • Lightweight and easy to move thanks to the integrated handle.
  • Quiet enough for offices and bedrooms.

Where it falls short

  • Thermostat granularity is limited to five setpoints; you can’t fine-tune to 1°F.
  • No oscillation, timer, or remote—if you want those, you’ll need a different class of heater.
  • Build quality feels average; control tactility varies between units.
  • Directional heat requires mindful placement to avoid warm spots and cold corners.

Who it’s for

If you need a compact, plug-in heater to warm a home office, a small bedroom, or to take the chill off a living room seat, this Black+Decker space heater fits the job. It’s especially good for people who value straightforward controls and the ability to pick it up and move it around the house. If you’re trying to heat an open-concept space or you want programmable schedules and app control, you’ll be better served by a larger, feature-rich unit.

Recommendation

I recommend this heater for small-room, personal heating where simplicity and portability matter, with two caveats. First, plan your placement and expectations: it’s a 1500 W directional heater, not a whole-room solution for large spaces. Second, treat it as a basic appliance and follow conservative safety habits—plug it directly into a wall outlet, give it clearance, and don’t leave it running unattended. Within those boundaries, it warms quickly, runs quietly, and the E‑Save mode genuinely helps balance comfort with energy use. If you prefer finer thermostat control, oscillation, or premium build, look elsewhere; otherwise, this is a practical little heater that does its core job well.


Project Ideas

Business

Winter Market Vendor Comfort Kits

Rent turnkey heating kits to outdoor vendors: heater, cord management, safety mat, and quick setup guide. The E-Save mode lowers electrical load for shared circuits, while the 60–80°F thermostat keeps booths comfortable. Offer day-rate rentals with optional on-site setup.


Airbnb Room-Zone Heating Service

Provide short-term rental hosts with room-by-room comfort bundles. Install compact heaters, create guest instructions for the five temperature levels, and train hosts on E-Save to reduce utility costs. Upsell seasonal inspections and energy reports.


Urban Micro-Greenhouse Kits

Sell starter greenhouse packages for balcony and garage gardeners: compact grow tent, heater, thermometer, and layout guide. Market the thermostat range for seed starting and use E-Save to keep operating costs low. Offer workshops and seed subscriptions.


Office Under-Desk Heat Subscription

Lease heaters to workplaces to cut complaints about cold zones. Provide power-safe deployment plans, user guides for low/High/E-Save, and monthly usage summaries. Tiered pricing includes replacements, seasonal checks, and employee comfort surveys.

Creative

Seedling Start Cabinet

Convert a metal storage cabinet into a mini greenhouse for starting seeds. Place the heater at the base with safe clearance and set the thermostat to 70–75°F; use E-Save to maintain warmth without overshooting. Add a simple thermometer/hygrometer and vent holes for airflow to create a stable, energy-efficient germination environment.


Art & Resin Drying Tent

Build a collapsible fabric drying tent (aluminum frame with dust-filtered vents) for paintings, screen prints, or resin pieces. Position the heater outside the tent entrance with a safe gap so warm air drifts in. Use the 60–80°F thermostat and E-Save to gently hold temperature, speeding cures while reducing energy use and keeping dust off.


Boot & Glove Drying Locker

Create a wooden or metal cubby locker with mesh shelves and ventilation holes. Set the heater on low (750 W) at the base with a heat shield and clear airflow path. The compact form factor and thermostat help circulate mild warmth to dry wet winter gear efficiently after outdoor work or skiing.


Wax & Leather Warm Bench

Make an insulated tabletop hood for beeswax modeling, encaustic prep, or warming leather conditioners. Use high heat for quick room warm-up, then switch to E-Save to hold around 70°F so materials stay supple. The portable handle makes it easy to reposition as you change stations.